Yayınlar

Bitlis Eren Üniversitesi Fen Bilimleri Dergisi, cilt.10, sa.4, ss.1282-1289, 2021 (Hakemli Dergi)

A new concept for the eco-friendly structural colorization of anodic titania: Photonic crystal structure

DALMIŞ R., YILMAZ O., DİKİCİ T.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS, cilt.631, 2021 (SCI-Expanded)

Manipulation of brightness and decay kinetics of LuAG: Ce3+ and YAG: Ce3+ by simple metal oxides in polymeric matrices

Yildirim B., KESKİN Ö. Y., OĞUZLAR S., BİRLİK I., Azem F. A., ERTEKİN K.

OPTICS AND LASER TECHNOLOGY, cilt.142, 2021 (SCI-Expanded, Scopus)

Sol-Jel Yöntemiyle IGZO Partiküllerin Üretimi, Peletlenmesi ve Karakterizasyonu

Ekincioğlu Y., KILIÇ H. Ş., Dereli Ö.

JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI, cilt.24, sa.3, ss.1317-1325, 2021 (ESCI)

DFT Study of Conformational Analysis, Molecular Structure and Properties of para-, meta- and ortho 4-Methoxyphenyl Piperazine Isomers

Brazilian Journal of Physics, cilt.51, sa.4, ss.958-968, 2021 (SCI-Expanded)

Characterization and optical gas sensing properties of BaSnO3 synthesized by novel technique: flame spray pyrolysis

Zeyrek Ongun M., Oğuzlar S., Akalın S. A., Yıldırım S.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, cilt.32, sa.11, ss.15160-15170, 2021 (SCI-Expanded)

Synthesis, characterization and optical properties of Ag-doped TiO2 nanoparticles by flame spray pyrolysis

Gündoğdu Y., KILIÇ H. Ş., Çadırcı M.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, cilt.32, sa.12, ss.16346-16358, 2021 (SCI-Expanded) Sürdürülebilir Kalkınma

Third order nonlinear optical properties of CdTe/CdSe Quasi Type-II Colloidal Quantum Dots

Optical Materials, cilt.114, 2021 (SCI-Expanded)

An Overview on Recent Progress of Metal Oxide/Graphene/CNTs-Based Nanobiosensors

AYKAÇ A., Gergeroglu H., Besli B., Akkas E. O., YAVAŞ A., Guler S., et al.

NANOSCALE RESEARCH LETTERS, cilt.16, sa.1, 2021 (SCI-Expanded)

Comparison of Sm3+ and Tb3+ dopant effects on the silica-based three-dimensional inverse opal photonic crystal coatings

DALMIŞ R., BİRLİK I., AK AZEM N. F., Celik E.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, cilt.32, sa.6, ss.7815-7826, 2021 (SCI-Expanded)

Soğuk Püskürtme Teknolojisi ve Uygulamaları

Tekin E., Uyum S., Karahan B., Tekin K. C., Malayoğlu U.

Mühendis ve Makina, cilt.62, sa.702, ss.106-150, 2021 (Hakemli Dergi)

Recycling waste clay and rice husk ash in the production of low-density ceramics Düşük yoğunluklu seramik üretiminde atık kil ve pirinç kabuğu külünün geri dönüştürülmesi

ÖZKAN İ., DOKUMACI ALKAN E.

El-Cezeri Journal of Science and Engineering, cilt.8, sa.1, ss.309-314, 2021 (Scopus)

Comparison of processing parameter effects during magnetron sputtering and electrochemical anodization of TiO2 nanotubes on ITO/glass and glass substrates

Basalan E., EROL M., Sancakoglu O., Dikici T., Celik E.

MATERIALS TESTING, cilt.63, sa.3, ss.245-252, 2021 (SCI-Expanded)

Experimental and theoretical study of the characteristics of lspr peaks for metal nps produced by controlling ar ambient gas pressure to enhance the efficiency of solar cells

Gezgin S. Y., Kepceoğlu A., KILIÇ H. Ş.

Canadian Journal of Physics, cilt.99, sa.10, ss.907-912, 2021 (SCI-Expanded)

Rhenium/rhenium oxide nanoparticles production using femtosecond pulsed laser ablation in liquid

Kepceoglu A., Gündogdu Y., Sarilmaz A., Ersöz M., ÖZEL F., KILIÇ H. Ş.

Turkish Journal of Chemistry, cilt.45, sa.2, ss.485-492, 2021 (SCI-Expanded)

Effect of silica particle size and filler content on the fracture properties of epoxy resin composite

Azem Z., Malayoğlu U., Uyulgan B.

HIGH TEMPERATURES-HIGH PRESSURES, cilt.50, sa.0, ss.395-414, 2021 (SCI-Expanded)

A systematic study in synthesis of CeO(2)films on Ni tapes from different precursors using sol-gel process

Celik E., Yigit R., Yıldırım S., Avci E., Hasçiçek Y. S.

JOURNAL OF THE AUSTRALIAN CERAMIC SOCIETY, cilt.56, sa.4, ss.1515-1529, 2020 (SCI-Expanded)

Effect of Ultrasonic Treatment Parameters on Microstructural and Mechanical Properties of A356 Aluminum Alloy

DOKUMACI E., AYBARÇ U., ÖNEL K.

International Journal of Automotive Science and Technology, cilt.4, sa.4, ss.234-243, 2020 (Hakemli Dergi)

KATKILANDIRILMIŞ (Eu, Dy, Sb, Co, Tb) BARYUM TİTANAT SERAMİKLERİNİN (BaTiO3) DİELEKTRİK VE MANYETİK ÖZELLİKLERİNİN İNCELENMESİ

GERGEROĞLU H., EBEOĞLUGİL M. F., TAŞÇI E.

Journal of Scientific report B, sa.2, ss.9-28, 2020 (TRDizin)

Development of alpha-Fe2O3/TiO2 3D hierarchical nanostructured photocatalysts through electrochemical anodization and sol-gel methods

Uzunbayir B., Kartal U., DOLUEL E. C., YURDDAŞKAL M., EROL M.

JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY, cilt.96, sa.2, ss.441-451, 2020 (SCI-Expanded)

Extraction and characterization of cellulosic fiber from Centaurea solstitialis for composites

KESKİN Ö. Y., DALMIŞ R., BALCI KILIÇ G., SEKİ Y., KÖKTAŞ S.

CELLULOSE, cilt.27, sa.17, ss.9963-9974, 2020 (SCI-Expanded, Scopus)

Structurally colored silica photonic crystal coatings modified by Ce or Eu rare-earth dopants

DALMIŞ R., BİRLİK I., AK AZEM N. F., Celik E.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS, cilt.603, 2020 (SCI-Expanded)

Novel ZA27/B4C/Graphite Hybrid Nanocomposite-Bearing Materials with Enhanced Wear and Corrosion Resistance

GÜLER O., ÇELEBİ M., DALMIŞ R., ÇANAKÇI A., ÇUVALCI H.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, cilt.51, sa.9, ss.4632-4646, 2020 (SCI-Expanded)

Mechanical and electrochemical properties of PEO coatings on zirconium alloy

Malayoğlu U., Tekin K. C., Malayoğlu U., Belevi M.

SURFACE ENGINEERING, cilt.36, sa.8, ss.800-808, 2020 (SCI-Expanded, Scopus)

Wet-electrospun PHBV nanofiber reinforced carboxymethyl chitosan-silk hydrogel composite scaffolds for articular cartilage repair

ÇOLPANKAN GÜNEŞ O., ZİYLAN A., Tasdemir S., ŞENDEMİR A.

JOURNAL OF BIOMATERIALS APPLICATIONS, cilt.35, ss.515-531, 2020 (SCI-Expanded)

Production and characterization of the halogen-free and nanostructured flame retardant reinforced composite coatings

Yıldırım S., Celik E.

JOURNAL OF THE AUSTRALIAN CERAMIC SOCIETY, cilt.56, sa.2, ss.683-695, 2020 (SCI-Expanded)

Effect of dopant elements on structure and morphology of SnO2 nanoparticles

Anli S. T., EBEOĞLUGİL M. F., Celik E.

JOURNAL OF THE AUSTRALIAN CERAMIC SOCIETY, cilt.56, sa.2, ss.403-411, 2020 (SCI-Expanded, Scopus)

Effect of Ar Gas pressure on LSPR property of Au nanoparticles: Comparison of experimental and theoretical studies

Gezgin S. Y., Kepceoğlu A., Gündoğdu Y., Zongo S., Zawadzka A., KILIÇ H. Ş., et al.

Nanomaterials, cilt.10, sa.6, 2020 (SCI-Expanded)

Synthesis, structural and optical characterization of Nd: YAG powders via flame spray pyrolysis

Sakar N., Gergeroglu H., Akalın S. A., Oğuzlar S., Yıldırım S.

OPTICAL MATERIALS, cilt.103, 2020 (SCI-Expanded)

Growth of ZnO nanowires on carbon fibers for photocatalytic degradation of methylene blue aqueous solutions: An investigation on the optimization of processing parameters through response surface methodology/central composite design

Tunc I. D., EROL M., GÜNEŞ F., SÜTÇÜ M.

CERAMICS INTERNATIONAL, cilt.46, sa.6, ss.7459-7474, 2020 (SCI-Expanded)

Fish scale/poly(3-hydroxybutyrate-co-3-hydroxyvalerate) nanofibrous composite scaffolds for bone regeneration

Kara A., ÇOLPANKAN GÜNEŞ O., ZİYLAN A., Bilici G., ERBİL G., HAVITÇIOĞLU H.

JOURNAL OF BIOMATERIALS APPLICATIONS, cilt.34, sa.9, ss.1201-1215, 2020 (SCI-Expanded)

Cooling Behavior of A356 Alloy in Surfactant Quenching Medium

Güneren A., DOKUMACI ALKAN E.

International Journal of Metalcasting, cilt.14, sa.2, ss.580-588, 2020 (SCI-Expanded)

Dye sensitized solar cells based on titanium dioxide nanoparticles synthesized by flame spray pyrolysis and hydrothermal sol-gel methods: a comparative study on photovoltaic performances

Aboulouard A., GÜLTEKİN B., CAN M., EROL M., Jouaiti A., Elhadadi B., et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, cilt.9, sa.2, ss.1569-1577, 2020 (SCI-Expanded) Sürdürülebilir Kalkınma

Comparison of the effect of non-metal and rare-earth element doping on structural and optical properties of CuO/TiO2 one-dimensional photonic crystals

KESKİN Ö. Y., DALMIŞ R., BİRLİK I., AK AZEM N. F.

JOURNAL OF ALLOYS AND COMPOUNDS, cilt.817, 2020 (SCI-Expanded, Scopus)

Real-Time Distinguishing of the Xylene Isomers Using Photoionization and Dissociation Mass Spectra Obtained by Femtosecond Laser Mass Spectrometry (FLMS)

Kepceoğlu A., Gündoğdu Y., Ledingham K. W. D., KILIÇ H. Ş.

Analytical Letters, cilt.53, sa.2, ss.290-307, 2020 (SCI-Expanded)

Characterization of a new natural cellulose based fiber from Hierochloe Odarata

DALMIŞ R., KÖKTAŞ S., SEKİ Y., Kilinc A. Ç.

CELLULOSE, cilt.27, sa.1, ss.127-139, 2020 (SCI-Expanded)

Production and photovoltaic characterisation of n-Si/p-CZTS heterojunction solar cells based on a CZTS ultrathin active layers

Gezgin S. Y., Houimi A., KILIÇ H. Ş.

Optik, cilt.199, 2019 (SCI-Expanded) Sürdürülebilir Kalkınma

Comparison of performances of Principal Component Analysis (PCA) and Factor Analysis (FA) methods on the identification of cancerous and healthy colon tissues

Gündoğdu Y., Karabağlı P., Alptekin H., Şahin M., KILIÇ H. Ş.

International Journal of Mass Spectrometry, cilt.445, 2019 (SCI-Expanded) Sürdürülebilir Kalkınma

Modification of the sedimentation method for PMMA photonic crystal coatings

DALMIŞ R., BİRLİK I., AK AZEM N. F., Celik E.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS, cilt.577, ss.194-201, 2019 (SCI-Expanded)

Green alternative treatment for cellulosic fibers: ionic liquid modification of Abelmoschus esculentus fibers with methyl-tri-n-butyl ammonium methyl sulphate

SEKİ Y., KÖKTAŞ S., Kilinc A. Ç., DALMIŞ R.

MATERIALS RESEARCH EXPRESS, cilt.6, sa.8, 2019 (SCI-Expanded)

Comparison of structural and optical properties of CeO2 and CeO2:Eu3+ nanoparticles synthesized via sol-gel and flame spray pyrolysis methods

Yıldırım S., Akalın S. A., Oğuzlar S., Zeyrek Ongun M., Ozer C., Erol M.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, cilt.30, sa.14, ss.13749-13756, 2019 (SCI-Expanded)

SiO2/TiO2 one-dimensional photonic crystals doped with Sm and Ce rare-earth elements for enhanced structural colors

DALMIŞ R., AK AZEM N. F., BİRLİK I., Celik E.

APPLIED SURFACE SCIENCE, cilt.475, ss.94-101, 2019 (SCI-Expanded)

Molecular structure and TD-DFT study of the xylene isomers

Kepceoglu A., Gundogdu Y., Dereli O., KILIÇ H. Ş.

Gazi University Journal of Science, cilt.32, sa.1, ss.300-308, 2019 (Scopus)

Three-dimensional silk impregnated HAp/PHBV nanofibrous scaffolds for bone regeneration

ÇOLPANKAN GÜNEŞ O., Unalan I., ÇEÇEN B., ZİYLAN A., HAVITÇIOĞLU H., Ustun O., et al.

INTERNATIONAL JOURNAL OF POLYMERIC MATERIALS AND POLYMERIC BIOMATERIALS, cilt.68, sa.5, ss.217-228, 2019 (SCI-Expanded)

Synthesis, and spectroscopic, thermal and dielectric properties of phosphazene based ionic liquids: OFET application and tribological behavior

AKBAŞ H., KARADAĞ A., Destegul A., Cakirlar C., YERLİ Y., TEKİN K. C., et al.

NEW JOURNAL OF CHEMISTRY, cilt.43, sa.5, ss.2098-2110, 2019 (SCI-Expanded, Scopus)

Structural and optical properties of SrAl2O4: Eu2+/Dy3+ phosphors synthesized by flame spray pyrolysis technique

Gultekin S., Yıldırım S., Yılmaz O., Keskin I. C., Katı M. İ., Celik E.

JOURNAL OF LUMINESCENCE, cilt.206, ss.59-69, 2019 (SCI-Expanded)

Effect of Vanadium and Zirconium Additions on Mechanical Properties and Microstructure of Gravity Die-Cast AlSi9Cu2 Alloy Cylinder Heads

Kilinc E., Kiremitci N., Birol Y., DOKUMACI ALKAN E.

INTERNATIONAL JOURNAL OF METALCASTING, cilt.13, sa.1, ss.137-145, 2019 (SCI-Expanded)

Magnesium Production from Calcined Dolomite via the Pidgeon Process

Bugdayci M., TURAN A., ALKAN M., Yücel O.

MAGNESIUM AND ITS ALLOYS: TECHNOLOGY AND APPLICATIONS, ss.47-56, 2019 (SCI-Expanded)

Production of borosilicate cullet by using rice husk ash

ÖZKAN İ., DOKUMACI ALKAN E.

ARABIAN JOURNAL OF GEOSCIENCES, cilt.12, sa.2, 2019 (SCI-Expanded)

AGING TEMPERATURE EFFECT on HARDNESS and MICROSTRUCTURE of A357 ALUMINIUM ALLOY PART WHICH PRODUCED by GDC and LPDC

Özkan G., UYULGAN B.

Soma Meslek Yüksekokulu Teknik Bilimler Dergisi, cilt.2, sa.26, ss.11-17, 2018 (Hakemli Dergi)

Production of Iron Based Alloys from Mill Scale through Metallothermic Reduction

BUĞDAYCI M., ALKAN M., TURAN A., Yücel O.

HIGH TEMPERATURE MATERIALS AND PROCESSES, cilt.37, ss.889-898, 2018 (SCI-Expanded)

Effect of different surface treatments on the shear bond strength of resin cement to zirconia ceramic and metal alloy*

Yucel M. T., Kilic I., Okutan Y., Tobi E. S., KILIÇ H. Ş., Kepceoglu A., et al.

Journal of Adhesion Science and Technology, cilt.32, sa.20, ss.2232-2243, 2018 (SCI-Expanded)

Dielectrical, optical, and structural characterization of TiO2/PVA nanocomposite films for dielectric applications

Gultekin S., Yıldırım S., Celik E., Arıcan Alıcıkuş L. Z.

JOURNAL OF THE AUSTRALIAN CERAMIC SOCIETY, cilt.54, sa.3, ss.523-531, 2018 (SCI-Expanded)

Influence of growth parameters on the properties of TiO2 films prepared by anodic spark oxidation method and photocatalytic degradation of methylene blue

Dikici T., Yurddaşkal M., Yıldırım S., Celik E.

JOURNAL OF THE AUSTRALIAN CERAMIC SOCIETY, cilt.54, sa.3, ss.451-458, 2018 (SCI-Expanded)

Karbon Fiber/ZnO Fotokatalizörlerin Üretimi ve Karakterizasyonu

EROL M.

Deu Muhendislik Fakultesi Fen ve Muhendislik, cilt.20, sa.60, ss.924-929, 2018 (Hakemli Dergi)

Study Of Tribological Features Of AA6082 Material Coated With Micro Arc Oxidation (MAO) Method At Different Lubricating Conditions

BAŞOĞUL Y., DURAK E., MALAYOĞLU U.

American Journal of Engineering Research (AJER), cilt.7, sa.8, ss.177-199, 2018 (Hakemli Dergi)

Effect of femtosecond laser beam angle and formed shape on surface roughness and shear bond strength between zirconia and resin cement

Yucel M. T., Kilic I., KILIÇ H. Ş., Gundogdu Y., Okutan Y.

Journal of Adhesion Science and Technology, cilt.32, sa.12, ss.1265-1277, 2018 (SCI-Expanded)

Surface modification of new cellulose fiber extracted from Conium maculatum plant: a comparative study

SEKİ Y., Kilinc A. Ç., DALMIŞ R., Atagur M., KÖKTAŞ S., GÖKTAŞ A. A., et al.

CELLULOSE, cilt.25, sa.6, ss.3267-3280, 2018 (SCI-Expanded)

Comparative Study on Flame Retardancy, Thermal, and Mechanical Properties of Glass Fiber Reinforced Polyester Composites with Ammonium Polyphosphate, Expandable Graphite, and Aluminum Tri-hydroxide

Çolpankan Güneş O., Gömek R., Tamar A., Kandemir O. K., Karaorman A., Ziylan Albayrak A.

ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, cilt.43, ss.6211-6218, 2018 (SCI-Expanded)

Extraction and investigation of lightweight and porous natural fiber from Conium maculatum as a potential reinforcement for composite materials in transportation

Kilinc A. Ç., KÖKTAŞ S., SEKİ Y., Atagur M., DALMIŞ R., ERDOĞAN Ü. H., et al.

COMPOSITES PART B-ENGINEERING, cilt.140, ss.1-8, 2018 (SCI-Expanded) Sürdürülebilir Kalkınma

Fiziksel Buhar Biriktirme Yöntemlerinden PVD ve JVD/DVD İnce Film Kaplamaların Karşılaştırılması ve DVD Kaplama Teknolojisinin Endüstriyel Uygulamaları Üzerine Kavramsal, Akademik ve Teorik Bir Analiz

AYTAÇ A., MALAYOĞLU U.

Savunma Bilimleri Dergisi, cilt.17, ss.131-164, 2018 (Hakemli Dergi)

The Effect of Mechanical Milling on Graphite-Boron Carbide Hybrid Reinforced ZA27 Nanocomposites

DALMIŞ R., ÇUVALCI H., ÇANAKÇI A., GÜLER O., Celik E.

ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, cilt.43, sa.3, ss.1113-1124, 2018 (SCI-Expanded)

Analysis of Current-Voltage-Temperature and Capacitance-Voltage-Temperature Characteristics of Re/n-Si Schottky Contacts

Durmuş H., KILIÇ H. Ş., Gezgin S. Y., Karataş Ş.

Silicon, cilt.10, sa.2, ss.361-369, 2018 (SCI-Expanded)

Sputtered Si and Mg doped hydroxyapatite for biomedical applications

Vladescu A., Cotrut C. M., AK AZEM N. F., Bramowicz M., Pana I., Braic V., et al.

BIOMEDICAL MATERIALS, cilt.13, sa.2, 2018 (SCI-Expanded)

HIPed TiO2 dense pellets with improved photocatalytic performance

Erol M., Ertugrul O.

CERAMICS INTERNATIONAL, cilt.44, sa.3, ss.2991-2999, 2018 (SCI-Expanded)

Influence of Bath Composition on the Structure and Properties of Nickel Coatings Produced by Electrodeposition Technique

BİRLİK I., AK AZEM N. F.

Deu Muhendislik Fakultesi Fen ve Muhendislik, cilt.20, sa.59, ss.689-697, 2018 (Hakemli Dergi)

Enhanced photocatalytic properties of Sn-doped ZnO nanoparticles by flame spray pyrolysis under UV light irradiation

Yurddaşkal M., Yıldırım S., Dikici T., Yurddaskal M., Erol M., Aritman İ., et al.

Journal of the Turkish Chemical Society, Section A: Chemistry, cilt.5, ss.15-22, 2018 (Scopus)

Gözenekli ZrB2 Peletlerin Farklı Sıcaklıklardaki Oksidasyon Davranışları

DOKUMACI E., ÖZKAN İ., ÖNAY A. B.

Deu Muhendislik Fakultesi Fen ve Muhendislik, cilt.20, sa.58, ss.1-9, 2018 (Hakemli Dergi)

Evaluation of the Possibility of using Diatomite Natural Mineral as a Composite Agent in Acrylic Coating

Farzaneh A., Erol M., Mermer O., Cobley A. J., Asl S. K.

PROTECTION OF METALS AND PHYSICAL CHEMISTRY OF SURFACES, cilt.54, sa.1, ss.99-103, 2018 (SCI-Expanded)

Effect of Reductant Type on the Metallothermic Magnesium Production Process

Bugdayci M., TURAN A., ALKAN M., Yücel O.

HIGH TEMPERATURE MATERIALS AND PROCESSES, cilt.37, sa.1, ss.1-8, 2018 (SCI-Expanded)

Effects of Zn-doping on the photocatalytic activity and microstructures of nanocrystalline SnO2 powders

Yurddaşkal M., Yıldırım S., Dikici T., Yurddaskal M., Erol M., Aritman İ., et al.

Journal of the Turkish Chemical Society, Section A: Chemistry, cilt.5, ss.9-14, 2018 (Scopus)

Sol-jel Yöntemi ile Hazırlanmış ZnO Nanopartiküllerin Optimizasyonu

AK AZEM N. F., BİRLİK I.

Deu Muhendislik Fakultesi Fen ve Muhendislik, cilt.20, sa.58, ss.121-127, 2018 (Hakemli Dergi)

Biodegradable Ceramics Consisting of Hydroxyapatite for Orthopaedic Implants

Monsees T. K., AK AZEM N. F., Cotrut C. M., Braic M., Abdulgader R., Pana I., et al.

COATINGS, cilt.7, sa.11, 2017 (SCI-Expanded)

Fabrication of new high temperature Gd2O3-ZrO2 insulation coatings on Ag tapes by sol-gel technique for magnet technology

EBEOĞLUGİL M. F., Yigit R., KÖSEOĞLU K., Avci E., Celik E.

JOURNAL OF THE AUSTRALIAN CERAMIC SOCIETY, cilt.53, sa.2, ss.361-372, 2017 (SCI-Expanded, Scopus)

Cyclic oxidation behavior of TiB2 pellets at elevated temperatures

ÖZKAN İ., DOKUMACI ALKAN E., ÖNAY A. B.

JOURNAL OF THE AUSTRALIAN CERAMIC SOCIETY, cilt.53, sa.2, ss.415-420, 2017 (SCI-Expanded)

Sol-gel synthesis, characterization, and photoluminescence properties of sub-micron Gd2O2SO4 powders

Aritman İ., Yıldırım S., Ebeoğlugil M. F., Yurddaşkal M., Ertekin K., Celik E.

JOURNAL OF THE AUSTRALIAN CERAMIC SOCIETY, cilt.53, sa.2, ss.457-463, 2017 (SCI-Expanded, Scopus)

DC Electric Arc Furnace Application for Production of Nickel-Boron Master Alloys

ALKAN M., Tasyurek K. C., Bugdayci M., TURAN A., Yücel O.

JOM, cilt.69, sa.9, ss.1654-1662, 2017 (SCI-Expanded) Sürdürülebilir Kalkınma

Effect of Nano-sized B4C Addition on the Mechanical Properties of ZA27 Composites

DALMIŞ R., ÇUVALCI H., ÇANAKÇI A., GÜLER O.

JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION, cilt.32, sa.4, ss.747-752, 2017 (SCI-Expanded)

Luminescent properties of scintillator nanophosphors produced by flame spray pyrolysis

Yıldırım S., Asal E. C. K., Ertekin K., Celik E.

JOURNAL OF LUMINESCENCE, cilt.187, ss.304-312, 2017 (SCI-Expanded)

Carbon black and graphite filled conducting nanocomposite films for temperature sensor applications

Yurddaşkal M., Erol M., Celik E.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, cilt.28, sa.13, ss.9514-9518, 2017 (SCI-Expanded)

Production, characterization, and luminescent properties of Eu3+ doped yttrium niobate-tantalate films

Yıldırım S., Demirci S., Ertekin K., Celik E., Alicikus Z. A.

JOURNAL OF ADVANCED CERAMICS, cilt.6, sa.1, ss.33-42, 2017 (SCI-Expanded)

Production of plasma electrolytic oxide coatings on Ti6Al4V alloy in aluminate-based electrolytes

Ertus E. B., Yıldırım S., Celik E.

SURFACE ENGINEERING, cilt.33, sa.10, ss.787-795, 2017 (SCI-Expanded, Scopus)

Synthesis and Characterization of Gd2O2SO4.Pr3+ Scintillation Material Produced by Sol-Gel Process for Digital Imaging System

Aritman I., Yıldırım S., Kisa A., Guleryuz L. F., Yurddaşkal M., Dikici T., et al.

ACTA PHYSICA POLONICA A, cilt.131, sa.1, ss.106-108, 2017 (SCI-Expanded)

Effect of La3+ and Ti4+ Ions on the Magnetic Properties of Barium Hexaferrite Powders Synthesized Using Sol-Gel Method

JOURNAL OF MAGNETICS, cilt.21, sa.4, ss.496-502, 2016 (SCI-Expanded)

Investigation of duty cycle effect on corrosion properties of electrodeposited calcium phosphate coatings

AK AZEM N. F., Delice T. K., Ungan G., Cakir A.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS, cilt.68, ss.681-686, 2016 (SCI-Expanded)

Inorganic White Thermal-Control Coatings for Extreme Space Environments

Shrestha S., del Pino C. B., MALAYOĞLU U.

JOURNAL OF SPACECRAFT AND ROCKETS, cilt.53, sa.6, ss.1061-1067, 2016 (SCI-Expanded, Scopus)

Preparation and Characterization of Ni-TiO2 Nanocomposite Coatings Produced by Electrodeposition Technique

BİRLİK I., AK AZEM N. F., Toparli M., Celik E., Delice T. K., Yildirim S., et al.

FRONTIERS IN MATERIALS, cilt.3, 2016 (SCI-Expanded)

Preparation and Characterization of Ni-TiO2 Nanocomposite Coatings Produced by Electrodeposition Technique

Birlik I., Ak Azem N. F., Toparlı M., Çelik E., Koc Delice T., Yıldırım S., et al.

Frontiers in Materials, cilt.3, ss.1-7, 2016 (Scopus)

Mechanical properties and biocompatibility of the sputtered Ti doped hydroxyapatite

Vladescu A., Padmanabhan S. C., AK AZEM N. F., Braic M., Titorencu I., Birlik I., et al.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS, cilt.63, ss.314-325, 2016 (SCI-Expanded)

Influence of zircon particle size on conventional and microwave assisted reaction sintering of in-situ mullite-zirconia composites

Ertugrul O., DALMIŞ R., Akpinar S., Kusoglu I. M., Celik E.

CERAMICS INTERNATIONAL, cilt.42, sa.9, ss.11104-11117, 2016 (SCI-Expanded)

Effect of pH and annealing temperature on the structural and magnetic properties of cerium-substituted yttrium iron garnet powders produced by the sol-gel method

Yarici I., EROL M., Celik E., ÖZTÜRK Y.

MATERIALS SCIENCE-POLAND, cilt.34, sa.2, ss.362-367, 2016 (SCI-Expanded)

YENİ BİR PULS LASER DEPOZİSYON PLD SİSTEMİ TASARIMI ÜRETİMİ VE UYGULAMALARI

KILIÇ H. Ş., DURMUŞ H.

Selçuk Üniversitesi Teknik Eğitim Fakültesi Teknik Online Dergisi, cilt.15, sa.1, ss.24-43, 2016 (Hakemli Dergi)

INVESTIGATION OF GRAPHITE NANO PARTICLE ADDITION ON THE PHYSICAL AND MECHANICAL PROPERTIES OF ZA27 COMPOSITES

DALMIŞ R., ÇUVALCI H., ÇANAKÇI A., GÜLER O.

ADVANCED COMPOSITES LETTERS, cilt.25, sa.2, ss.37-42, 2016 (SCI-Expanded)

Fracture behavior of various welded steels

Ozdemir T. E., ÇETİNEL H., UYULGAN B.

MATERIALS TESTING, cilt.58, sa.2, ss.102-108, 2016 (SCI-Expanded)

Densification of TiB2 with metallic additive by using vacuum arc melting: A preliminary study

ÖZKAN İ., DOKUMACI ALKAN E., ÖNAY A. B.

JOURNAL OF THE AUSTRALIAN CERAMIC SOCIETY, cilt.52, sa.1, ss.42-46, 2016 (SCI-Expanded)

Tribological behaviour of plasma electrolytic oxide coatings on Ti6Al4V and cp-Ti alloys

TEKİN K. C., MALAYOĞLU U., Shrestha S.

SURFACE ENGINEERING, cilt.32, sa.6, ss.435-442, 2016 (SCI-Expanded, Scopus)

HDPE PE Plastic Electrical Cable Communicationm Bundle Pipe Tube Extrusion Production Line

Erkin Y., Dokumacı Alkan E.

REVISTA BRASILEIRA DE ANESTESIOLOGIA, cilt.65, sa.6, ss.491-496, 2015 (SCI-Expanded)

Fabrication and characterization of nanostructured anatase TiO2 films prepared by electrochemical anodization and their photocatalytic properties

Yurddaşkal M., Dikici T., Yıldırım S., Yurddaşkal M., Toparli M., Celik E.

JOURNAL OF ALLOYS AND COMPOUNDS, cilt.651, ss.59-71, 2015 (SCI-Expanded)

Effect of the deposition temperature on corrosion resistance and biocompatibility of the hydroxyapatite coatings

Vladescu A., Braic M., AK AZEM N. F., Titorencu I., Braic V., Pruna V., et al.

APPLIED SURFACE SCIENCE, cilt.354, ss.373-379, 2015 (SCI-Expanded)

Effect of femtosecond laser beam angle on bond strength of zirconia-resin cement

Akpinar Y. Z., Kepceoglu A., Yavuz T., Aslan M. A., Demirtag Z., KILIÇ H. Ş., et al.

Lasers in Medical Science, cilt.30, sa.8, ss.2123-2128, 2015 (SCI-Expanded)

In vitro comparison of epidural bacteria filters permeability and screening scanning electron microscopy

Sener A., Erkin Y., Sener A., Tasdogen A., Dokumacı Alkan E., Elar Z.

REVISTA BRASILEIRA DE ANESTESIOLOGIA, cilt.65, sa.6, ss.491-496, 2015 (SCI-Expanded)

Wear behaviour of plasma electrolytic oxide coatings on E21 and WE43 Mg alloys

MALAYOĞLU U., TEKİN K. C.

SURFACE ENGINEERING, cilt.31, sa.7, ss.526-533, 2015 (SCI-Expanded, Scopus)

Synthesis and comparison of the photocatalytic activities of flame spray pyrolysis and sol-gel derived magnesium oxide nano-scale particles

Demirci S., Öztürk B., Yıldırım S., Bakal F., Erol M., Sancakoʇlu O., et al.

MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING, cilt.34, ss.154-161, 2015 (SCI-Expanded)

Photocatalytic degradation of cyanide in wastewater using new generated nano-thin film photocatalyst

PALA A., Politi R. R., Kurşun G., Erol M., Bakal F., Öner G., et al.

SURFACE & COATINGS TECHNOLOGY, cilt.271, ss.207-216, 2015 (SCI-Expanded)

Production of Al-Co-Ni Ternary Alloys by the SHS Method for Use in Nickel Based Superalloys Manufacturing

ALKAN M., Sönmez M. Ş., Derin C. B., Yücel O., Andreev D. E., Sanin V. N., et al.

HIGH TEMPERATURE MATERIALS AND PROCESSES, cilt.34, sa.3, ss.275-283, 2015 (SCI-Expanded)

The processing and characterization of Pb(Mg1/3Nb2/3)O-3 (PMN) powders for coating capacitor

EBEOĞLUGİL M. F., Celik E.

MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING, cilt.31, ss.325-333, 2015 (SCI-Expanded, Scopus)

A comparative study on the photocatalytic activities of microporous and nanoporous TiO2 layers prepared by electrochemical anodization

Dikici T., Yıldırım S., Yurddaşkal M., Erol M., Yigit R., Toparli M., et al.

SURFACE & COATINGS TECHNOLOGY, cilt.263, ss.1-7, 2015 (SCI-Expanded)

Simulation of Wheatstone Bridge for Measurement of Resistances

KÖKLÜ N., YENER D., KILIÇ H. Ş.

International Journal of Applied Mathematics, Electronics and Computers, cilt.3, sa.1, ss.78-82, 2015 (Hakemli Dergi)

The corrosion and bioactivity behavior of SiC doped hydroxyapatite for dental applications

AK AZEM N. F., Kiss A., BİRLİK I., Braic V., Luculescu C., Vladescu A.

CERAMICS INTERNATIONAL, cilt.40, sa.10, ss.15881-15887, 2014 (SCI-Expanded)

Enhancement of the mechanical properties of hydroxyapatite by SIC addition

Vladescu A., Birlik I., Braic V., Toparli M., Celik E., AK AZEM N. F.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS, cilt.40, ss.362-368, 2014 (SCI-Expanded)

Tuning oxygen sensitivity of ruthenium complex exploiting silver nanoparticles

Ozturk O., Öter Ö., Yıldırım S., Subaşı E., Ertekin K., Celik E., et al.

JOURNAL OF LUMINESCENCE, cilt.155, ss.191-197, 2014 (SCI-Expanded)

High Temperature Yb2O3-ZrO2 Insulation Coatings on Ag Tapes for Magnet Technology

Kaplan M., EBEOĞLUGİL M. F., BİRLİK I., YİĞİT R., ÇELİK E., Avcı E.

Afyon Kocatepe Üniversitesi Fen ve Mühendislik Bilimleri Dergisi, cilt.14, ss.117-128, 2014 (TRDizin)

Gaz Sensörleri İçin Sol-jel Yöntemiyle Cam Altlıklar Üzerine Cu:SnO2 Filmlerin Üretilmesi ve Karakterizasyonu

Elbeyli S., EROL M., BİRLİK I., EBEOĞLUGİL M. F., Mermer Ö., Taş S., et al.

Afyon Kocatepe Üniversitesi Fen ve Mühendislik Bilimleri Dergisi, cilt.14, ss.407-416, 2014 (TRDizin)

Preparation and Characterization of TiO2 Nanofluid by Sol-gel Method for Cutting Tools

Birlik I., Ak Azem N. F., Yiğit R., Erol M., Yıldırım S., Yurddaşkal M., et al.

Afyon Kocatepe Üniversitesi Fen ve Mühendislik Bilimleri Dergisi, cilt.14, ss.453-460, 2014 (Hakemli Dergi)

Preparation and Characterization of SiO2 Nanofluid by Flame Spray System for Machining Process

Ak Azem N. F., Birlik I., Yiğit R., Erol M., Yıldırım S., Çelik E.

Afyon Kocatepe Üniversitesi Fen ve Mühendislik Bilimleri Dergisi, cilt.14, ss.471-478, 2014 (Hakemli Dergi)

APPLICATION OF A NEURAL NETWORK FOR ESTIMATING THE CRACK FORMATION AND PROPAGATION IN SOL-GEL CeO2 COATINGS DURING PROCESSING AT TEMPERATURE

Savran A., Alcı M., Yıldırım S., Yigit R., Celik E.

MATERIALI IN TEHNOLOGIJE, cilt.48, sa.4, ss.453-457, 2014 (SCI-Expanded)

THE EFFECTS OF RALOXIFENE ON OSTEOCALCIN, AS A BONE TURNOVER MARKER IN ORCHIECTOMIZED RATS

Saklamaz A., UYULGAN B., Sevin G., Kebapcilar L., Yilmaz O., Cimrin D., et al.

ACTA ENDOCRINOLOGICA-BUCHAREST, cilt.10, sa.3, ss.340-351, 2014 (SCI-Expanded) Sürdürülebilir Kalkınma

The Effect of Ru Substitution on the Electrical and Humidity Sensor Properties of Semiconductor Tin Oxide Film

Mermer Ö., Erol M., Bektaş M., Çelik E.

Afyon Kocatepe Üniversitesi Fen ve Mühendislik Bilimleri Dergisi, cilt.14, ss.129-133, 2014 (Hakemli Dergi)

Synthesis of V, Er and Ce Substitued TiO2 Films via Sol-gel Method to Degrade Cyanide Content in Waste Water Under UV/Sunlight Source

Çakırğlu E., Erol M., Kocakuş S., Çelik E.

Afyon Kocatepe Üniversitesi Fen ve Mühendislik Bilimleri Dergisi, cilt.14, ss.429-433, 2014 (Hakemli Dergi)

Mineralogical characterization of chemically isolated ingredients from biomass

Haykiri-Acma H., Yaman S., ALKAN M., Kucukbayrak S.

ENERGY CONVERSION AND MANAGEMENT, cilt.77, ss.221-226, 2014 (SCI-Expanded)

Mikro Ark Oksidasyon Tekniğinin Alüminyum Esaslı Malzemelere Uygulanması

BAŞOĞUL Y., ŞİMŞEK M., DURAK E., MALAYOĞLU U.

Soma MYO Teknik Bilimler Dergisi, cilt.19, ss.7-20, 2014 (Hakemli Dergi)

Characterization and photocatalytic properties of nanoporous titanium dioxide layer fabricated on pure titanium substrates by the anodic oxidation process

DİKİCİ T., Erol M., Toparli M., Celik E.

CERAMICS INTERNATIONAL, cilt.40, sa.1, ss.1587-1591, 2014 (SCI-Expanded)

Femtosecond laser induced photodynamic therapy on 5-ALA treated SKMEL-30 cells: An efficient theranostic strategy to combat melanoma

Kars M. D., Kara R., Gündoǧdu Y., Kepceoǧlu A., KILIÇ H. Ş.

Biomedicine and Pharmacotherapy, cilt.68, sa.5, ss.657-662, 2014 (SCI-Expanded) Sürdürülebilir Kalkınma

Electrochemical behavior of plasma electrolytic oxide coatings on rare earth element containing Mg alloys

TEKİN K. C., MALAYOĞLU U., Shrestha S.

SURFACE & COATINGS TECHNOLOGY, cilt.236, ss.540-549, 2013 (SCI-Expanded, Scopus)

Effect of boronizing on the oxidation of niobium

DOKUMACI ALKAN E., ÖZKAN İ., Ozyigit M. B., Onay B.

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, cilt.41, ss.276-281, 2013 (SCI-Expanded)

Effect of boronizing on the cyclic oxidation of stainless steel

DOKUMACI ALKAN E., ÖZKAN İ., Onay B.

SURFACE & COATINGS TECHNOLOGY, cilt.232, ss.22-25, 2013 (SCI-Expanded)

ELECTRO-CODEPOSITED Cr-SiC COMPOSITE COATINGS: EFFECT OF THE PULSE-CURRENT FREQUENCY ON MORPHOLOGY AND HARDNESS

Sancakoğlu O., Erol M., Agaday B., Celik E.

MATERIALI IN TEHNOLOGIJE, cilt.47, sa.5, ss.601-604, 2013 (SCI-Expanded)

Determination of Direct Reduction Conditions of Mill Scale

Yücel O., Demirci F., Turan A., ALKAN M.

HIGH TEMPERATURE MATERIALS AND PROCESSES, cilt.32, sa.4, ss.405-412, 2013 (SCI-Expanded)

Deposition and Characterization of Tungsten Carbide Thin Films by DC Magnetron Sputtering for Wear-Resistant Applications

Tavsanoglu T., Begum C., ALKAN M., Yücel O.

JOM, cilt.65, sa.4, ss.562-566, 2013 (SCI-Expanded)

Degradation of Contaminated Industrial Waste Water using Sol-Gel Derived Ru-doped TiO2 Photocatalytic Films

EROL M., SANCAKOĞLU O., Mermer O., Celik E.

EKOLOJI, cilt.22, sa.88, ss.13-20, 2013 (SCI-Expanded) Sürdürülebilir Kalkınma

GRAPHITE-FLAKE CARBON-BLACK-REINFORCED POLYSTYRENE-MATRIX COMPOSITE FILMS DEPOSITED ON GLASS-FIBER WOVEN FABRICS AS PLANE HEATERS

EROL M., Celik E.

MATERIALI IN TEHNOLOGIJE, cilt.47, sa.1, ss.25-28, 2013 (SCI-Expanded)

STRUCTURAL AND MAGNETIC PROPERTIES OF CERIUM-DOPED YTTRIUM-IRON GARNET THIN FILMS PREPARED ON DIFFERENT SUBSTRATES USING THE SOL-GEL PROCESS

ÖZTÜRK Y., EROL M., Celik E., Mermer O., KAHRAMAN G., AVGIN İ.

MATERIALI IN TEHNOLOGIJE, cilt.47, sa.1, ss.59-63, 2013 (SCI-Expanded)

Synthesis, Characterization and Optical Properties of ZnO-CuO-Al2O3 Semiconducting Films on glass substrates by Sol-Gel Technique

ÇELİK E., Öztoprak F., EBEOĞLUGİL M. F., BİRLİK I., YİĞİT R., TANOĞLU M., et al.

Usak University Journal of Material Sciences, sa.2, ss.9-36, 2012 (Hakemli Dergi)

Effect of initial composition on boron carbide production by SHS process followed by acid leaching

ALKAN M., Sönmez M. Ş., Derin C. B., Yücel O.

SOLID STATE SCIENCES, cilt.14, sa.11-12, ss.1688-1691, 2012 (SCI-Expanded)

Microstructural and Electrochemical Analysis of Inorganic and Hybrid Sol Gel Silica Coatings on Al 7075 Alloy: Effect of Additives

Göktaş A. A., Malayoğlu U., Malayoğlu U.

ASIAN JOURNAL OF CHEMISTRY, cilt.24, sa.8, ss.3633-3639, 2012 (SCI-Expanded)

A mass spectrometric investigation of isomers of butane

Aliç T. Y., KILIÇ H. Ş., Durmuş H., Doǧan M., Ledingham K. W. D.

Rapid Communications in Mass Spectrometry, cilt.26, sa.8, ss.893-905, 2012 (SCI-Expanded)

Effect of constraint on fracture behavior of welded 17mn4 and aisi304 steels

UYULGAN B., ÇETİNEL H., Aksoy T.

JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, cilt.25, sa.9, ss.2171-2177, 2011 (SCI-Expanded)

An investigation into the mechanical and tribological properties of plasma electrolytic oxidation and hard-anodized coatings on 6082 aluminum alloy

Malayoğlu U., Tekin K. C., Malayoğlu U., Shrestha S.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, cilt.528, sa.24, ss.7451-7460, 2011 (SCI-Expanded, Scopus)

The biomechanical assessment of fixation methods in periprosthetic femur fractures

Gulsen M., Karatosun V. A., UYULGAN B.

ACTA ORTHOPAEDICA ET TRAUMATOLOGICA TURCICA, cilt.45, sa.4, ss.266-269, 2011 (SCI-Expanded)

Biomechanical Analysis of Interbody Device in Calf Corpectomy Model

Senoglu M., UYULGAN B., Naderi S.

JOURNAL OF NEUROLOGICAL SCIENCES-TURKISH, cilt.28, sa.4, ss.497-512, 2011 (SCI-Expanded)

Influence of post-treatment on the corrosion resistance of PEO coated AM50B and AM60B Mg alloys

MALAYOĞLU U., TEKİN K. C., Shrestha S.

SURFACE & COATINGS TECHNOLOGY, cilt.205, sa.6, ss.1793-1798, 2010 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

Assessing the Tribocorrosion Performance of Three Different Nickel-Based Superalloys

TEKİN K. C., Çakmak E., MALAYOĞLU U.

TRIBOLOGY LETTERS, cilt.37, sa.3, ss.563-572, 2010 (SCI-Expanded, Scopus)

The effect of substrate composition on the electrochemical and mechanical properties of PEO coatings on Mg alloys

Cakmak E., TEKİN K. C., MALAYOĞLU U., Shrestha S.

SURFACE & COATINGS TECHNOLOGY, cilt.204, sa.8, ss.1305-1313, 2010 (SCI-Expanded, Scopus)

Investigation of radioulnocarpal joint load distribution effects of radial shortening osteotomy for the treatment of Kienbock disease: a biomechanical study

Turan A. C., UZUN B., Unal M., UYULGAN B., ÜNVER B., Gunal I.

EKLEM HASTALIKLARI VE CERRAHISI-JOINT DISEASES AND RELATED SURGERY, cilt.21, sa.2, ss.98-103, 2010 (SCI-Expanded, Scopus, TRDizin)

Alaçatı Çeşme Tüfünün KaroÜretiminde Kullanılabilirliğinin Araştırılması

ÖZKAN İ., ZELİHA M., ELÇİ H., DOKUMACI E.

Afyon Kocatepe Üniversitesi Fen Bilimleri Dergisi, ss.189-195, 2009 (Hakemli Dergi)

Synthesis of HAP coating on galvanostatically treated stainless steel substrates by sol-gel method

AK AZEM N. F., Cakir A.

JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY, cilt.51, sa.2, ss.190-197, 2009 (SCI-Expanded)

Synthesis and characterization of semiconductor tin oxide thin films on glass substrate by sol-gel technique

Culha O., EBEOĞLUGİL M. F., Birlik I., Celik E., Toparli M.

JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY, cilt.51, sa.1, ss.32-41, 2009 (SCI-Expanded, Scopus)

ITO films on glass substrate by sol-gel technique: synthesis, characterization and optical properties

Celik E., Aybarc U., EBEOĞLUGİL M. F., Birlik I., Culha O.

JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY, cilt.50, sa.3, ss.337-347, 2009 (SCI-Expanded, Scopus)

C-276 Nikel Alaşımının Oksitlenme Davranışının SEM ile İncelenmesi

DOKUMACI E., ÖNAY A. B.

Eskişehir Technical University Journal of Science and and Technology A- Applied Sciences and Engineering, cilt.10, sa.1, ss.285-290, 2009 (Hakemli Dergi)

Microstructural, thermal and mechanical properties of HVOF sprayed Ni-Al-based bond coatings on stainless steel substrate

Culha O., Celik E., AK AZEM N. F., Birlik I., Toparli M., Turk A.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, cilt.204, ss.221-230, 2008 (SCI-Expanded)

Plasma Elektrolitik Oksitlenme Yöntemi ile Hafif Metallerin Kaplanması

Mühendis ve Makina, cilt.49, sa.582, ss.3-8, 2008 (Hakemli Dergi)

Low-temperature, sol-gel-synthesized, silver-doped titanium oxide coatings to improve ultraviolet-blocking properties for cotton fabrics

Onar N., EBEOĞLUGİL M. F., Kayatekin I., Celik E.

JOURNAL OF APPLIED POLYMER SCIENCE, cilt.106, sa.1, ss.514-525, 2007 (SCI-Expanded, Scopus)

Wear behaviour of thermal flame sprayed FeCr coatings on plain carbon steel substrate

UYULGAN B., DOKUMACI ALKAN E., Celik E., Kayatekin I., AK AZEM N. F., Ozdemir I., et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, cilt.190, ss.204-210, 2007 (SCI-Expanded)

Polianilin ve Polipirol KaplananKumaşların Elektromanyetik Koruyuculuk ve İletkenlik Özellikleri

AKŞİT A., ONAR N., BİRLİK I., EBEOĞLUGİL M. F., ÇELİK E., ÖZDEMİR İ.

Tekstil Mühendis, cilt.14, sa.67, ss.1-10, 2007 (TRDizin)

Al2O3-TiO2 thin films on glass substrate by sol-gel technique

Celik E., Keskin I., Kayatekin I., AK AZEM N. F., Ozkan E.

MATERIALS CHARACTERIZATION, cilt.58, sa.4, ss.349-357, 2007 (SCI-Expanded)

Karbon Benzeri Elementlerin Bazı Uyarılmış Seviyeleri İçin İyonlaşma Potansiyellerinin Teorik Olarak hesaplanması

ÇELİK G., YILDIZ M., KILIÇ H. Ş.

S.Ü. Fen Ede. Fak. Fen Dergisi, cilt.27, ss.61-66, 2006 (Hakemli Dergi)

The biomechanical effects of talectomy on the foot

Ozcan O., Karapinar H., Boya H., UYULGAN B., Gunal I.

JOURNAL OF THE AMERICAN PODIATRIC MEDICAL ASSOCIATION, cilt.96, sa.6, ss.495-498, 2006 (SCI-Expanded)

The effect of fly ash and limestone fillers on the viscosity and compressive strength of self-compacting repair mortars

FELEKOĞLU B., Tosun K., Baradan B., Altun A., UYULGAN B.

CEMENT AND CONCRETE RESEARCH, cilt.36, sa.9, ss.1719-1726, 2006 (SCI-Expanded)

Processing, characterization and photocatalytic properties of Cu doped TiO2 thin films on glass substrate by sol-gel technique

Celik E., Gokcen Z., AK AZEM N. F., Tanoglu M., Emrullahoglu O. F.

MATERIALS SCIENCE AND ENGINEERING B-SOLID STATE MATERIALS FOR ADVANCED TECHNOLOGY, cilt.132, sa.3, ss.258-265, 2006 (SCI-Expanded)

Assessment of microstructural and mechanical properties of HVOF sprayed WC-based cermet coatings for a roller cylinder

Celik E., Culha O., UYULGAN B., AK AZEM N. F., Ozdemir I., Turk A.

SURFACE & COATINGS TECHNOLOGY, cilt.200, ss.4320-4328, 2006 (SCI-Expanded)

Preparation and characterization of Fe2O3-TiO2 thin films on glass substrate for photocatalytic applications

Celik E., Yildiz A., AK AZEM N. F., Tanoglu M., Toparli M., Emrullahoglu O., et al.

MATERIALS SCIENCE AND ENGINEERING B-SOLID STATE MATERIALS FOR ADVANCED TECHNOLOGY, cilt.129, ss.193-199, 2006 (SCI-Expanded)

An investigation of fracture toughness of carbon/epoxy composites

TOYGAR E. M., Toparli M., UYULGAN B.

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, cilt.25, sa.18, ss.1887-1895, 2006 (SCI-Expanded)

The theoretical calculation of transition probabilities for some excited p-d transitions in atomic nitrogen

Çelik G., Akin E., KILIÇ H. Ş.

European Physical Journal D, cilt.40, sa.3, ss.325-330, 2006 (SCI-Expanded)

Assessing the kinetics and mechanisms of corrosion of cast and HIPed Stellite 6 in aqueous saline environments

MALAYOĞLU U., Neville A., Lovelock H.

CORROSION SCIENCE, cilt.47, sa.8, ss.1911-1931, 2005 (SCI-Expanded, Scopus)

Mo and W as alloying elements in Co-based alloys - their effects on erosion-corrosion resistance

MALAYOĞLU U., Neville A.

WEAR, cilt.259, sa.1-6, ss.219-229, 2005 (SCI-Expanded, Scopus)

Effect of luting agents and reconstruction techniques on the fracture resistance of pre-fabricated post systems

Toksavul S., Toman M., UYULGAN B., Schmage P., Nergiz I.

JOURNAL OF ORAL REHABILITATION, cilt.32, sa.6, ss.433-440, 2005 (SCI-Expanded)

Characterisation of the passive film on HIPed Stellite 6 alloy using X-ray photoelectron spectroscopy

MALAYOĞLU U., Neville A., Beamson G.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, cilt.393, sa.1-2, ss.91-101, 2005 (SCI-Expanded, Scopus)

Biomechanical analysis of load transmission characteristics of limited carpal fusions used to treat Kienböck’xxs disease

GÜNAL İ. H., ÖZCAN Ö., UYULGAN B., BARAN Ö., ARMAN C., KARATOSUN V. A.

Acta Orthopaedica Et Traumatologica Turcica, cilt.4, sa.39, ss.351-355, 2005 (Scopus)

Biomechanical analysis of load transmission characteristics of limited carpal fusions used to treat Kienböck's disease Kienböck hastaligi tedavisinde sinirli karpal füzyonlarin yük aktarma özelliklerinin biyomekanik analizi.

Günal I., Ozcan O., UYULGAN B., Baran O., ARMAN C., Karatosun V. A.

Acta orthopaedica et traumatologica turcica, cilt.39, sa.4, ss.351-355, 2005 (SCI-Expanded)

Farklı Tür Feldispat İlavelerinin Yer Karosu Bünyesine Etkilerinin İncelenmesi

ceylan a., EBEOĞLUGİL M. F., küçük a.

Seramik Türkiye, cilt.7, sa.1304-6578/07/131137/01.01-02.2005, ss.131-137, 2005 (Hakemli Dergi)

The effect of yield strength mismatch on the fracture behavior of welded nodular cast iron

Cetinel H., UYULGAN B., Aksoy T.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, cilt.387, ss.357-360, 2004 (SCI-Expanded)

An in vitro wear investigation of dental ceramic porcelain veneers

UYULGAN B., Ozdemir I., Tekmen C., Toparli M., Celik E.

EURO CERAMICS VIII, PTS 1-3, cilt.264-268, ss.2005-2008, 2004 (SCI-Expanded)

Wear and friction properties of multilayer hard coatings by HTCVD method

Yigit R., Ozdemir I., Celik E., UYULGAN B., Aksoy T.

EURO CERAMICS VIII, PTS 1-3, cilt.264-268, ss.585-588, 2004 (SCI-Expanded)

Wear properties of functionally gradient layers on stainless steel substrates for high temperature applications

Cetinel H., UYULGAN B., Tekmen C., Ozdemir I., Celik E.

SURFACE & COATINGS TECHNOLOGY, cilt.174, ss.1089-1094, 2003 (SCI-Expanded)

Friction and wear properties of Mo coatings on cast-iron substrates

UYULGAN B., Cetinel H., Ozdemir I., Tekmen C., Okumus S., Celik E.

SURFACE & COATINGS TECHNOLOGY, cilt.174, ss.1082-1088, 2003 (SCI-Expanded)

Comparing the performance of HIPed and Cast Stellite 6 alloy in liquid-solid slurries

MALAYOĞLU U., Neville A.

WEAR, cilt.255, ss.181-194, 2003 (SCI-Expanded, Scopus)

Mechanical properties of device- vs. hand-mixed irreversible hydrocolloids.

Kilinc E., Cal E., Sonugelen M., Kesercioglu A., UYULGAN B.

JOURNAL OF DENTAL RESEARCH, cilt.82, 2003 (SCI-Expanded)

Hafif ve Isı Yalıtımı Geliştirilmiş Yapı Tuğlası Üretiminde KilGenleştirilmiş Perlit Kullanımının Araştırılması

EBEOĞLUGİL M. F., ceylan a.

DPÜ. Fen Bilimleri dergisi, sa.3, ss.91-99, 2002 (Hakemli Dergi)

The onset of Coulomb explosions in polyatomic molecules

Smith D., Ledingham K., Singhal R., McCanny T., Graham P., KILIÇ H. Ş., et al.

Rapid Communications in Mass Spectrometry, cilt.13, sa.14, ss.1366-1373, 1999 (SCI-Expanded)

Comment on "On the ionisation and dissociation of NO2 by short intense laser pulses"

Singhal R., KILIÇ H. Ş., Ledingham K., McCanny T., Peng W., Smith D., et al.

Chemical Physics Letters, cilt.292, sa.4-6, ss.643-646, 1998 (SCI-Expanded)

Comment on "On the ionisation and dissociation of NO2 by short intense laser pulses"

Singhal R., KILIÇ H. Ş., Ledingham K., McCanny T., Peng W., Smith D., et al.

CHEMICAL PHYSICS LETTERS, cilt.292, sa.4-6, ss.643-646, 1998 (SCI-Expanded)

Ionization and dissociation of benzaldehyde using short intense laser pulses

Smith D., Ledingham K., KILIÇ H. Ş., McCanny T., Peng W., Singhal R., et al.

Journal of Physical Chemistry A, cilt.102, sa.15, ss.2519-2526, 1998 (SCI-Expanded)

Time-of-flight mass spectrometry of aromatic molecules subjected to high intensity laser beams

Smith D., Ledingham K., Singhal R., KILIÇ H. Ş., McCanny T., Langley A., et al.

Rapid Communications in Mass Spectrometry, cilt.12, sa.13, ss.813-820, 1998 (SCI-Expanded) Sürdürülebilir Kalkınma

Multiphoton ionization and dissociation of nitromethane using femtosecond laser pulses at 375 and 750 nm

KILIÇ H. Ş., Ledingham K., Kosmidis C., McCanny T., Singhal R., Wang S., et al.

Journal of Physical Chemistry A, cilt.101, sa.5, ss.817-823, 1997 (SCI-Expanded)

Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler

Baryum Ferrit Katkılı Anilin Çözeltisi ile Kaplanan Kumaşların İletkenlik ve Manyetik Özellikleri

ONAR N., AKŞİT A., EBEOĞLUGİL M. F., BİRLİK I., ÇELİK E., ÖZDEMİR İ.

3.Uluslararası Teknik Tekstiller Kongresi, 15 - 18 Aralık 2007, (Tam Metin Bildiri)

SELF-CLEANING TiO2 THIN FILM COATINGS ADJUSTABLE BY ANODIZATION VOLGATAGES

YILMAZ O., EBEOĞLUGİL M. F., DALMIŞ R.

6. INTERNATIONAL ISTANBUL SCIENTIFIC RESEARCH CONGRESS, Türkiye, 30 Ekim 2021, (Tam Metin Bildiri)

Hydrothermal Synthesized Nanocrystalline V2O5 and Electrical Properties

GÖÇMEZ H., TUNCER M., çetin s., EBEOĞLUGİL M. F.

International Turkic World Conferance On Chemical Sciences And Technologies, Sarajevo, Bosna-Hersek, 27 Ekim - 01 Kasım 2015, ss.118, (Özet Bildiri)

Sol Jel Yöntemi Kullanılarak Kurşun Magnezyum Niyobat İnce Film Üretimi ve Karakterizasyonu

Yılmaz O., Ebeoğlugil M. F.

Metal yarıiletken ve oksit materyallerin üretiminde kullanılan sistemler ve analiz teknikleri kongresi, Türkiye, 15 - 18 Haziran 2009, (Tam Metin Bildiri)

SENSOR PROPERTIES OF ANODIZED AND SOL GEL TiO2 THIN FILMS

2. International Black Sea Modern Scientific Research Congress, Rize, Türkiye, 21 Aralık 2022, ss.329-337, (Tam Metin Bildiri)

YOLCU TAŞIMACILIĞI YAPAN TAŞITLARDA IŞINIMLA ISITMASISTEMİNİNDE KULLANILAN TEKSTİL KUMAŞININ TASARIMI

EROL M., KIRMACI V., EREN H., YAVAŞ A., DURAN H., ÖZTURK Y.

1st International Turkish World Engineering and Science Congress, Antalya, Türkiye, 7 - 10 Aralık 2017, (Tam Metin Bildiri)

High vibration absorptive body production for turning cutting tools with additive manufacturing technology

MALAYOĞLU U., SOYUSİNMEZ T., AKKUŞ G., GÜZELİPEK O.

The 18th International Conference on Machine Design and Production, Eskişehir, Türkiye, 10 - 12 Temmuz 2018, (Özet Bildiri)

Alaçatı Çeşme Tüfünün Karo Üretiminde Kullanılabilirliğinin Araştırılması

ÖZKAN İ., Zeliha M., ELÇİ H., DOKUMACI E.

VII. Uluslararası Katılımlı Seramik Kongresi, Afyon, Türkiye, 26 - 28 Kasım 2008, ss.189-195, (Tam Metin Bildiri)

Structural and Luminescence Characteristics of Orange Emitting Persistent Phosphor Based on SrS

Karsu E. C., Yıldırım S., Karalı T., Bulur E.

10th International Conference on Luminescence and ESR Dosimetry, Adana, Türkiye, 5 - 07 Eylül 2016, (Özet Bildiri)

Detailed Study of Thermoluminescence Response of CaF2 as a Function of Irradiation Temperature

Karsu E. C., Ioanna S., Yıldırım S., George K.

10th International Conference on Luminescence and ESR Dosimetry, Adana, Türkiye, 5 - 07 Eylül 2016, (Özet Bildiri)

Electrical behavior and positive temperature coefficient effect of carbon black and graphite filled conductive polymer composites

YURDDAŞKAL M., EROL M., ÇELİK E.

International Advanced Researches Engineering Congress-2017, Osmaniye, Türkiye, 16 - 18 Kasım 2017, (Özet Bildiri)

USAGE OF HUNTITE/HYDROMAGNESITE, BORIC ACID AND ANTIMONY(III) OXIDE AS FLAME RETARDANT MATERIALS IN PAINTS

Yıldırım S., Celik E.

International Conference on Production Research - Regional Conference Africa, Europe and the Middle East (ICPR-AEM) / 3rd International Conference on Quality and Innovation in Engineering and Management (QIEM), Cluj-Napoca, Romanya, 1 - 05 Temmuz 2014, ss.448-453, (Tam Metin Bildiri)

Production and Characterization of Magnetic and Luminescent Gd2O2SO4:Eu3+ Nanoparticles by Sol-gel Technique

Aritman I., Yıldırım S., Kisa A., Guleryuz L. F., Yurddaşkal M., Dikici T., et al.

6th Congress and Exhibition on International Advances in Applied Physics and Materials Science (APMAS), İstanbul, Türkiye, 1 - 03 Haziran 2016, cilt.1809, (Tam Metin Bildiri)

Fabrication and Characterization of Gd2O2SO4:Tb3+ Phosphors by Sol-gel Method

Aritman I., Yıldırım S., Kisa A., Guleryuz L. F., Yurddaşkal M., Dikici T., et al.

6th Congress and Exhibition on International Advances in Applied Physics and Materials Science (APMAS), İstanbul, Türkiye, 1 - 03 Haziran 2016, cilt.1809, (Tam Metin Bildiri)

PRODUCTION AND DEVELOPMENT OF MONOCLINIC YTTRIUM TANTALATE (M '-YTaO4) X-RAY PHOSPHOR VIA SOL-GEL TECHNIQUE

Yıldırım S., Demirci S., Mermer O., Toparli M., Arıcan Alıcıkuş L. Z., Akman F., et al.

Photocatalytic Efficiency of B doped TiO2 Nanotube Arrays Catalysts Produced via One Step Anodic Oxidation Process

BİLGİN K., GÜNNAZ S., EROL M.

International Nanoscience and Nanotechnology for Next Generation (NanoNG 2016), ANTALYA, KEMER, Türkiye, 20 - 22 Ekim 2016, (Özet Bildiri)

Production and characterization of titanium (Ti), platinum (Pt) and tantalum (Ta) thin films for native DNA biosensors

Genç E., Kepceoǧlu A., Gezgin S. Y., Kars M. D., KILIÇ H. Ş.

Turkish Physical Society 32nd International Physics Congress, TPS 2016, Konacik-Bodrum, Türkiye, 6 - 09 Eylül 2016, cilt.1815, (Tam Metin Bildiri)

Removal of magnesium and boron from chloride containing spent liquors

Sonmez M., Alkan M., Derin B., Yucel O.

Proceedings of the 2008 Global Symposium on Recycling, Waste Treatment and Clean Technology, REWAS 2008, Cancun, Meksika, 12 - 15 Ekim 2008, ss.851-856, (Tam Metin Bildiri)

An experimental investigation of localised surface plasmon resonance (LSPR) for Cu nanoparticles depending as a function of laser pulse number in Pulsed Laser Deposition

Gezgin S. Y., Kepceoǧlu A., KILIÇ H. Ş.

Turkish Physical Society 32nd International Physics Congress, TPS 2016, Konacik-Bodrum, Türkiye, 6 - 09 Eylül 2016, cilt.1815, (Tam Metin Bildiri)

Identification of the isomers using principal component analysis (PCA) method

Kepceoǧlu A., Gündoǧdu Y., Ledingham K. W. D., KILIÇ H. Ş.

9th International Physics Conference of the Balkan Physical Union, BPU 2015, İstanbul, Türkiye, 24 - 27 Ağustos 2015, cilt.1722, (Tam Metin Bildiri)

Nickel-chromium-boron alloys production by aluminothermic processes

Alkan M.

TMS Annual Meeting, Texas, Amerika Birleşik Devletleri, 3 - 07 Mart 2013, ss.335-340, (Tam Metin Bildiri)

An improvement on space focusing resolution in two-field time-of-flight mass spectrometers

Yildirim M., Sise O., Aydin R., Akin U., Ulu M., Dogant M., et al.

6TH International Conference of the Balkan Physical Union, İstanbul, Türkiye, 22 Ağustos 2006 - 26 Ağustos 2007, cilt.899, ss.721, (Tam Metin Bildiri)

Oxidation Behavior of Mo Containing Alloys

Dokumacı Alkan E., Önay B.

7th International Symposium on High Temperature Corrosion and Protection of Materials, Les Embiez, Fransa, 18 - 23 Mayıs 2008, ss.959-966, (Tam Metin Bildiri) Sürdürülebilir Kalkınma

Characterization of Complex Coatings developed on AISI 4140 Steel Substrate by Stepwise Surface Modification Process

DOKUMACI E., GARİP M., COŞKUN Y., TAŞÇILAR Y., ÖZKAN İ.

5th International Conference on Computational and Experimental Science and Engineering (ICCESEN 2018), Antalya, Türkiye, 12 - 16 Ekim 2018, (Özet Bildiri)

The Improvement of Metal Cutting Processing Using Al2O3 Nanoparticles

Yiğit R., Yıldırım S., Çelik E.

VIII. Uluslararası Katılımlı Seramik Kongresi, Afyonkarahisar, Türkiye, 22 - 24 Kasım 2012, cilt.14, ss.441-445, (Tam Metin Bildiri)

Seramik katkılı alev geciktirici polimerik nanokompozit malzemelerin üretilmesi karakterizasyonu ve endüstriyel uygulaması

Yurddaşkal M., Yıldırım S., Yılmaz S., Turhan A., Çelik E.

IX. Uluslararası Katılımlı Seramik Kongresi, Afyonkarahisar, Türkiye, 26 - 28 Kasım 2015, ss.79, (Özet Bildiri)

Structural and Luminescence Properties of YTNO:Ce3+ Thin Films

Yıldırım S., Karsu E. C., Arıcan Alıcıkuş L. Z., Çelik E.

10th International Conference on Luminescence and ESR Dosimetry, Adana, Türkiye, 5 - 07 Eylül 2016, (Özet Bildiri)

Synthesis and characterization of Gd2O2SO4 Pr3 scintillation material produced by sol gel process for digital imaging system

Aritman İ., Yıldırım S., Kısa A., Güleryüz L. F., Yurddaşkal M., Dikici T., et al.

6th International Advances in Applied Physics and Materials Science Congress Exhibition, İstanbul, Türkiye, 1 - 03 Haziran 2016, (Tam Metin Bildiri)

Low-Cost Carbon-Based Electromagnetic Shielding Material Design at X and Ku Bands for Electronics, Fabric and Wearable Equipment

ERTEKİN Z., SEÇMEN M., EROL M.

ELECO 2021 13th INTERNATIONAL CONFERENCE on ELECTRICAL and ELECTRONICS ENGINEERING, 25 Kasım 2021, (Tam Metin Bildiri)

Enhanced Photocatalytic Properties of Sn-Doped ZnO Nanoparticles by Flame Spray Pyrolysis under UV Light Irradiatıon

Yurddaşkal M., Yıldırım S., Dikici T., Yurddaşkal M., Erol M., Aritman İ., et al.

The International Porous and Powder Materials Symposium and Exhibition-2017, Aydın, Türkiye, 12 - 15 Eylül 2017, (Tam Metin Bildiri)

Influence of Anodization Conditions on The Self Ordered Nanoporous TiO2 Formation During Electrochemical Anodization of Titanium

Dikici T., Güzelaydın A. H., Yıldırım S., Toparlı M.

International Porous and Powder Materials Symposium and Exhibition (PPM 2013), İzmir, Türkiye, 3 - 06 Eylül 2013, (Özet Bildiri)

Effects of Zn-doping on the photocatalytic activity and microstructures of nanocrystalline SnO2 powders

Yurddaşkal M., Yıldırım S., Dikici T., Yurddaşkal M., Erol M., Aritman İ., et al.

The 3rd International Porous and Powder Materials Symposium and Exhibition, Aydın, Türkiye, 12 - 15 Eylül 2017, ss.120-123, (Tam Metin Bildiri)

PRODUCTION OF Fe-BASED ALLOYS BY METALLOTHERMIC REDUCTION OF MILL SCALES FROM CONTINUOUS CASTING PROCESSES

Bugdayci M., ALKAN M., Yücel O.

4th International Symposium on High-Temperature Metallurgical Processing held during the 142nd TMS Annual Meeting and Exhibition, San-Antonio, Kuzey Mariana Adaları, 3 - 07 Mart 2013, ss.219-225, (Tam Metin Bildiri)

Lanthanum Titanate La2Ti2O7 and Mullite 3Al2O3 2SiO2 Based Composites

EBEOĞLUGİL M. F.

8th Conference and Exhibition of The European Ceramic Society, İstanbul, Türkiye, 15 - 18 Haziran 2003, (Özet Bildiri)

IMPROVING WEAR RESISTANCE OF WE43 MAGNESIUM ALLOY BY COMBINATION OF COLD SPRAY AND MICRO ARC OXIDATION TECHNIQUES

Kaba M., Muhaffel F., MALAYOĞLU U., Çimenoğlu H.

The International Conference on Materials Science, Machine and Automotive Engineerings and Technology, İzmir- Çeşme, Türkiye, 10 - 12 Nisan 2018, (Özet Bildiri)

Ho2O3 ZrO2 Insulation Coatings on Ag Sheathed Bi 2212 Superconducting Tapes by Sol Gel Technique for Magnet Technologies

6.Uluslararası Katılımlı Seramik Kongresi, 15 - 18 Ekim 2006, (Tam Metin Bildiri)

A REFINEMENT STUDY OF SHS ALLOYS BY MINI VACUUM ARC MELTING SYSTEM

ALKAN M., Sönmez M. Ş., Derin C. B., Yücel O.

5th International Symposium on High-Temperature Metallurgical Processing held during 143rd TMS Annual Meeting and Exhibition, California, Amerika Birleşik Devletleri, 16 - 20 Şubat 2014, ss.139-145, (Tam Metin Bildiri)

Enhancement of electrical properties via graphene coating on copper wires

ÇAĞLAR E., ERSÜ G., PALANDÖKEN M., AYKAÇ A., EROL M., GÜNEŞ F.

The Internatinonal Conference on Materials Science, Mechanical and Automotive Engineerings and Technology, İzmir, Türkiye, 10 - 12 Nisan 2018, (Özet Bildiri)

An investigation on Carbon Fibers as flexible heating elements

YAVAŞ A., KIRMACI V., EROL M., EREN H.

International Congress on Mathematic, Engineering and Natural Sciences-IV, KİEV, Ukrayna, 11 - 13 Ağustos 2018, (Tam Metin Bildiri)

Effect of Ru and Al Substitutions on Sol Gel Derived ZnO Thin Films

6th Nanoscience and Nanotechnology Conference, İzmir, Türkiye, 15 - 18 Haziran 2010, (Özet Bildiri)

Magnetic Properties of Coated Fabrics with Barium Ferrite Doped Silica Sol

ONAR N., AKŞİT A., ÇELİK E., EBEOĞLUGİL M. F., ÖZDEMİR İ.

10th İnternational Conference of the Europen Ceramic Society, Berlin, Almanya, 17 - 21 Nisan 2007, ss.792-797, (Tam Metin Bildiri)

Fabric Based Plain Heaters as an Innovative Approach for Vehicle Heating: A Theoretical Research on Comparative Performance

KIRMACI V., EROL M., EREN H., YAVAŞ A., DURAN H., ÖZTÜRK Y.

II INTERNATIONAL CONFERENCE ON ENGINEERING TECHNOLOGY AND INNOVATION, PUDAPEST, Macaristan, 7 - 11 Mart 2018, ss.112-116, (Tam Metin Bildiri)

A New Insight on Pb Mg1 3Nb2 3 O3 Nano Scale Powders for Thin Film Capacitor

EBEOĞLUGİL M. F., Celik E.

8. Uluslararası Katılımlı Seramik Kongresi 2012, Afyonkarahisar, Türkiye, 22 - 24 Kasım 2012, cilt.14, ss.107-116, (Tam Metin Bildiri)

THE PROCESSING AND CHARACTERIZATION EUROPIUM DOPED Pb(Mg1/3Nb2/3)O-3 (PMN) NANO SCALE POWDERS FOR THIN FILM CAPACITOR

Synthesis of ZnO Nanostructured Photocatalysts via Electrochemical Anodization

YAVAŞ A., GÜLER S., EROL M.

2nd International Students Science Congress, İzmir, Türkiye, 4 - 05 Mayıs 2018, (Tam Metin Bildiri)

Synthesis and Characterization of Crdoped TiO2 Thin Films for Gas Sensors

KORSACILAR D., ALBAYRAK A., MALAYOĞLU U.

6.Uluslararası Katılımlı Seramik Kongresi, 15 - 18 Ekim 2006, (Tam Metin Bildiri)

Investigation of the Effect of CuO Nanofluid in Minimum Quantity Lubrication Machining

Yiğit R., Yıldırım S., Çelik E.

VIII. Uluslararası Katılımlı Seramik Kongresi, Afyonkarahisar, Türkiye, 22 - 24 Kasım 2012, cilt.14, ss.447-452, (Tam Metin Bildiri)

Elektropolimerizasyon Yöntemiyle 316L Paslanmaz Çelik Altlık Üzerine Sentetik Hidrojel Polimeri Kaplanarak Biyo uyumlu Metalik İmplant Üretimi

13th International Materials Symposium, 13 - 15 Ekim 2010

Experimental Test Results of a Fabric Based Infrared Heating System on a Public Transport Vehicle

EREN H., EROL M., KIRMACI V.

SEVENTH INTERNATIONAL CONFERENCE ON ADVANCES iN CIVIL, STRUCTURAL AND MECHANICAL ENGINEERING - CSM’xx18, Roma, 27 - 28 Ekim 2018, ss.49-51, (Tam Metin Bildiri)

Electromagnetic Interference Shielding Performance of Ionic Liquid Modified Carbon Black and Graphite in Polyvinylidene fluoride at Ku-Band

ERTEKİN Z., SEÇMEN M., EROL M.

11th International Conference on Electrical and Electronics Engineering (ELECO), Bursa, Türkiye, 28 - 30 Kasım 2019, ss.637-641, (Tam Metin Bildiri)

EFFECTS OF STOICHIOMETRY ON BORON CARBIDE PRODUCTION VIA SELF PROPAGATING HIGH TEMPERATURE SYNTHESIS

ALKAN M., Derin C. B., Sönmez M. Ş., Yücel O.

Symposium on Extraction and Processing Division held at the TMS 2009 Annual Meeting and Exhibition, San-Francisco, Kostarika, 15 - 19 Şubat 2009, ss.703-704, (Tam Metin Bildiri)

EFFECT OF THE REDUCTANTS ON THE PRODUCTION OF IRON BASED ALLOYS FROM MILL SCALE BY METALLOTHERMIC PROCESS

Bugdayci M., TURAN A., ALKAN M., Yücel O.

7th International Symposium on High-Temperature Metallurgical Processing held during TMS 145th Annual Meeting and Exhibition, Tennessee, Amerika Birleşik Devletleri, 14 - 18 Şubat 2016, ss.165-171, (Tam Metin Bildiri)

Nanometric Measurement of the Pre Nano Scale TiO2 Powders via Flame Spray Pyrolysis: Synthesis, Properties and Photocatalytical Decomposition of Methylene Blue

Erol M., Yurddaşkal M., Yıldırım S., Mermer Ö., Baş G., Çakmakçı M., et al.

20th IMEKO World Congress 2012, Busan, Güney Kore, 9 - 14 Eylül 2012, cilt.3, ss.1771-1776, (Tam Metin Bildiri)

Fosfozen esaslı yeni iyonik sıvıların OFET ve tribolojik kullanımları

AKBAŞ H., KARADAĞ A., DESTEGÜL A., KILIÇ Z., CANIMKURBEY B., ÇAKIRLAR Ç., et al.

VI. Ulusal Anorganik Kimya Kongresi, Türkiye, 18 - 21 Mayıs 2017, (Özet Bildiri)

Fosfazen Esaslı Yeni İyonik Sıvıların Ofet ve Tribolojik Kullanımları

AKBAŞ H., KARADAĞ A., DESTEGÜL A., KILIÇ Z., CANIMKURBEY B., ÇAKIRLAR Ç., et al.

Uluslar arası katılımlı VI. Ulusal Anorganik Kimya Kongresi, Burdur, Türkiye, 18 - 21 Mayıs 2017, (Özet Bildiri)

A COMPARATIVE STUDY ON THE REDUCTION OF MILL SCALE FROM CONTINUOUS CASTING PROCESSES

Bugdayci M., Turan A., ALKAN M., Demirci F., Yücel O.

Cerium-Doped Yttrium Iron Garnet Thin Films Prepared by Sol-Gel Process: Synthesis, Characterization, and Magnetic Properties

Oeztuerk Y., Avgin I., EROL M., Celik E.

International Conference on Nanoscale Magnetism (ICNM-2007), İstanbul, Türkiye, 25 - 29 Haziran 2007, cilt.122, ss.113-115, (Tam Metin Bildiri)

Effects of sputtering parameters on the structural properties of Ti films on glass substrates

Başalan E., EROL M., SANCAKOĞLU O., MERMER Ö., DİKİCİ T., TOPARLI M.

12thInternational Nanoscience and Nanotechnology Conference NanoTR12, 3 - 05 Haziran 2016, (Özet Bildiri)

Synthesis of V, Er and Ce Substitued TiO2 Films via Sol-gel Method toDegrade Cyanide Content in Waste Water Under UV/Sunlight Source

ÇAKIROĞLU E., EROL M., KOCAKUŞ S., ÇELİK E.

8.uluslararası Katılımlı Seramik Kongresi, AFYON, Türkiye, 22 - 24 Kasım 2012, cilt.14, ss.429-433, (Özet Bildiri)

Erbium Doped Pb Mg1 3Nb2 3 O3 PMN For Coating Capacitor

EBEOĞLUGİL M. F., ÇELİK E., erekler d.

23.INTERNATIONAL CONFERENCE ON MATERIALS AND TECHNOLOGY, Portoroz, Slovenya, 27 - 30 Eylül 2015, (Özet Bildiri)

Self-cleaning properties of cotton fabrics coated by Zn doped-TiO2 thin films

AKŞİT A., ONAR N., EBEOĞLUGİL M. F., BİRLİK I., ÇELİK E.

AUTEX 2007, Tampere, Finlandiya, 26 - 28 Haziran 2007, (Tam Metin Bildiri)

ZnO Semiconducting Films on Glass Susbtrate by Sol Gel Technique for Gas Sensors

ÇELİK E., EBEOĞLUGİL M. F.

1.Ulusal metal yarıiletken ve oksit materyallerin üretiminde kullanılan sistemler ve analiz teknikleri, Türkiye, 15 - 18 Haziran 2009, (Tam Metin Bildiri)

THE EFFECT OF APRICOT KERNEL SHELL NANO BIOCHAR ON MECHANICAL PROPERTIES OF MORTAR

ŞİŞMAN M., TEOMETE E., YANIK J., MALAYOĞLU U., DUMAN TAÇ G.

22. ULUSAL MEKANİK KONGRESİ, Adana, Türkiye, 6 - 08 Eylül 2021, (Tam Metin Bildiri)

Two-Steps Electrochemical Process for Growth of ZnO Nanostructures on Glass/ITO Substrate

UZUNBAYIR B., AYKAÇ A., EROL M., DİKİCİ T., GÜNEŞ F.

2nd International Students Science Congress, İzmir, Türkiye, 4 - 05 Mayıs 2018, (Tam Metin Bildiri)

Silica Based Shear Thickening Fluids (STFs) and Their Composites

ÇOLPANKAN GÜNEŞ O., Yildiz S., Tanoglu M.

9th International Conference on Composite Science and Technology (ICCST) - 2020-Scientific and Industrial Challenges, Naples, İtalya, 24 - 26 Nisan 2013, ss.993-994, (Tam Metin Bildiri)

Düşük Basınçlı Döküm Yöntemi ile Üretilen Al5Si0,3Mg Jant Alaşımında Tane İnceltme Yöntemlerinin Geliştirilmesi

Kaba M., Dönmez A., Çukur A., Kurban F., Çubuklusu E., Aybarç U., et al.

8. Alüminyum Sempozyumu, Türkiye, 5 - 07 Ekim 2017, (Tam Metin Bildiri)

A comparative study on photocatalytic methylene blue degradation of conventionally sintered and HIPed sol-gel derived TiO2 nanopowders

EROL M., ERTUĞRUL O., ÖNEL K., ÇELİK E.

European Congress and Exhibition on Advanced Materials and Processes, Sevilla, İspanya, 8 - 13 Eylül 2013, (Özet Bildiri)

2D Graphene Based Composite with Polyethylene Glycol

ÇAĞLAR E., BEŞLİ B., ÇETİN M., AYKAÇ A., EROL M., ÇULCULAR E., et al.

2nd International Students Science Congress, İzmir, Türkiye, 4 - 05 Mayıs 2018, (Tam Metin Bildiri)

Analysis by Scratch Method of Coatings of AISI5115 and M31 Steels Coated with AlTiN and CrN Using PVD Method

Aytaç A., MALAYOĞLU U.

40th Leeds-Lyon Symposium on Tribology & Tribochemistry Forum 2013, 4 - 07 Eylül 2013

FEMTOSECOND LASER ABLATION BASED Al2O3@Sn PRODUCTION AND NONLINEAR OPTICAL PROPERTIES

KILIÇ H. Ş., YİĞİT GEZGİN S., GÜNDOĞDU Y.

V. International Cappadocia Scientific Research Congress 2023, Nevşehir/Kapadokya, Türkiye, 5 - 07 Kasım 2023, (Tam Metin Bildiri)

Development of visible light active Fe2O3/TiO2 nanostructured photocatalysts

Uzunbayır B., Doluel E. C., Kartal U., YURDDAŞKAL M., EROL M.

8th International Conference on Advanced Technologies, 26 - 30 Ağustos 2019, (Özet Bildiri)

Femtosecond Laser Mass Spectrometry (FLMS): Identification Of Molecular Structures With Same Molecular Mass

KILIÇ H. Ş.

Turkısh Physıcal Socıety 33 Rd Internatıonal Physıcs Congress, September 6-10, 2017, 6 - 10 Eylül 2017, (Özet Bildiri)

Identification of the ısomers using principal component analysis pca method 2015

KEPCEOĞLU A., KILIÇ H. Ş., GÜNDOĞDU Y., Ledingham K.

9th International Physics Conference of the Balkan Physical Union, İstanbul University, İstanbul / Turkey, (Oral Presentation)., İstanbul, Türkiye, 24 - 28 Ağustos 2015, (Tam Metin Bildiri)

Distribution of ZnO/Ag Nanocomposites in Nanofiber Production Based on Electrospinning Method

KILIÇ H. Ş., KUŞ R., YİĞİT GEZGİN S., GÜNDOĞDU Y.

International Antalya Scientific Research and Innovative Studies Congress, Antalya, Türkiye, 18 Aralık 2021, (Tam Metin Bildiri)

Production and characterization of Fe3O4 nanoparticles via flame spray pyrolysis

Yurddaşkal M., Yıldırım S., Erol M., Çelik E.

8th Nanoscience and Nanotechnology Congress (NanoTR-VIII), Ankara, Türkiye, 25 - 29 Haziran 2012, (Özet Bildiri)

Frictional and wear properties of phosphazene-based ionic liquids on AA7075 aluminium alloy

Tekin K. C., Akbaş H., Karadağ A., Malayoğlu U.

9th International Conference on Tribology, 2017, Nevşehir, Türkiye, 13 - 15 Eylül 2017, (Özet Bildiri)

Ni-TiO2 nanokompozit kaplamların yapısal ve mekanik özellikleri

Bardakçıoğlu O., YILDIRIM S., Koç Delice T., DİKİCİ T., TOPARLI M., ÇELİK E., et al.

27.Ulusal Kimya Kongresi, Çanakkale, Türkiye, 23 - 28 Ağustos 2015, ss.618, (Özet Bildiri)

The effect of substrate composition on the electrochemical properties of PEO coatings on Mg alloys

YİĞİT GEZGİN S., BATURAY Ş., KILIÇ H. Ş.

Euromat 2009, 7 - 10 Ekim 2009, (Özet Bildiri)

Effect Of 800 Nm Wavelength Femtosecond Laser Cleanıng Performance On Ancıent Coın Obtaıned From Konya Regıon

GÜNDOĞDU Y., IŞIK İ., KIZIL A., KILIÇ H. Ş.

Turkish Physical Society 35th International Physics Congress, Muğla-Bodrum, Türkiye, 4 - 08 Ağustos 2019, (Özet Bildiri)

Applications Of Principal Component Analysis PCA On Data Of Femtosecond Laser Mass Spectrometry FLMS For Identification Of Hexane Isomers

GÜNDOĞDU Y., TAŞER M., KEPCEOĞLU A., KILIÇ H. Ş.

3rd International Conference on Advanced Technology & Sciences, Konya, Türkiye, 1 - 03 Eylül 2016, (Özet Bildiri)

Oxidation Behavior of Borided Binary and Ternary Nb Alloys

DOKUMACI E., ÖZKAN İ., ÖNAY A. B.

The European Corrosion Congress (EUROCORR 2012), İstanbul, Türkiye, 9 - 11 Eylül 2012, ss.486, (Özet Bildiri)

The modelling of CuO/SnO2 heterojunction solar cell by SCAPS-1D Simulation

4th International Conference on Engineering and Applied Natural Sciences ICAENS 2023, Konya, Türkiye, 20 - 21 Kasım 2023, (Tam Metin Bildiri)

Enhancement of the hydroxyapatite properties by SiC addition

AK AZEM N. F., BİRLİK I., TOPARLI M., ÇELİK E., Braic M., Vladecsu A.

25th Symposium and Annual Meeting of the International Society for Ceramics in Medicine, Bucharest, Romanya, 7 - 10 Kasım 2013, ss.109, (Özet Bildiri)

Investigation Of High Temperature Oxidation Behaviour Of Mo Content Nickel-Base Alloys

DOKUMACI E., ÖNAY A. B., ÖZKAN İ.

11th International Materials Symposium, Denizli, Türkiye, 19 Nisan 2006, ss.603-607, (Tam Metin Bildiri)

The preparation and improvement of photovoltaic properties of Nb2O5 based nanocomposites electrodes for dye sensitized solar cell (DSSC)

GÖÇMEZ H., TUNCER M., çetin s., EBEOĞLUGİL M. F., ulu d., koçak m., et al.

International Conference on Electronic Materials (IUMRS-ICEM 2012), Yokohama, Japonya, 23 - 28 Eylül 2012 Sürdürülebilir Kalkınma

Synthesis of ZnO nanowires on 3D graphene foam via hydrothermal method

beşli b., ÇAĞLAR E., DOĞAN I., TURGUT E. S., EROL M., GÜNEŞ F.

The Internatinonal Conference on Materials Science, Mechanical and Automotive Engineerings and Technology, İzmir, Türkiye, 10 - 12 Nisan 2018, (Özet Bildiri)

Carbon Fiber Reinforced Acrylic Bone Cements:An Investigation on the Effects of Various Electrochemical SurfaceModifications on the Mechanical Properties

AKKAŞ E., SALMAN AKDENİZ G., AYKAÇ A., EROL M., GÜNEŞ F.

2nd International Students Science Congress, İzmir, Türkiye, 4 - 05 Mayıs 2018, (Tam Metin Bildiri)

An Investigation On The Properties Of Electrodeposited Nickel Thin Films On Transparent Conductive Oxide Coated Glass

Özdemir E. T., Erol M.

DEU INTERNATIONAL SYMPOSIUM SERIES ON GRADUATE RESEARCHES-2023, 21 - 22 Aralık 2023, ss.553-555, (Tam Metin Bildiri)

Production of AlCoCrFeNiME-Based High-Entropy Alloys via Self-Propagating High-Temperature Synthesis

ALKAN M., DOKUMACI ALKAN E., Turkoglu B., Kara A., Aksu B., Ugurluer D.

148th The-Minerals-Metals-and-Materials-Society (TMS) Annual Meeting and Exhibition (TMS) on Microelectronic Packaging, Interconnect, and Pb-Free Solder, San-Antonio, Kuzey Mariana Adaları, 10 - 14 Mart 2019, ss.1281-1287, (Tam Metin Bildiri)

The Effect of Sewage Sludge Nano Biochar on Mechanical Properties of Mortar

ŞİŞMAN M., TEOMETE E., YANIK J., MALAYOĞLU U.

International Conference on “Cement – Based Materials Tailored for a Sustainable Future”, İstanbul, Türkiye, 27 - 29 Mayıs 2021, cilt.1, ss.127-132, (Tam Metin Bildiri)

Co-Cr-Mo ALLOYS PRODUCTION BY SELF PROPAGATING HIGH TEMPERATURE SYNTHESIS

Okur O., ALKAN M., Yücel O.

Production and Indentation Analysis of Pb Mg1 3Nb2 3 O3Capacitor Coatings

EBEOĞLUGİL M. F., ÇULHA O., ÇELİK E., TOPARLI M.

13th International Materials Symposium, Denizli, Türkiye, 15 - 18 Ekim 2010, (Tam Metin Bildiri)

Structural And Electrical Properties Of Ru Doped Zno Film Fabricated By Sol Gel Technique And Using For Gas Sensing

6th Nanoscience and Nanotehnology Conference, 15 - 18 Haziran 2010, (Tam Metin Bildiri)

The Processing of Pb Mg1 3Nb2 3 O3 PMN Nano scale Powder for Thin Film Capacitor Coatings

Akalın S. A., Oğuzlar S., Zeyrek Ongun M., Yıldırım S.

5.Ulusal Nanobilim ve Nanoteknoloji Konferansı, Türkiye, 15 - 18 Haziran 2009, (Tam Metin Bildiri)

EXPERIMENTAL ANALYSIS OF PERFORMANCE OF TWO PARALLEL CONNECTEDCOUNTER FLOW RANQUE-HILSCH VORTEX TUBE WITH DIFFERENT NOZZLENUMBER MADE OF STEEL

KIRMACI V., EROL M., EREN H.

International Congress on Mathematic, Engineering and Natural Sciences-IV, Kiev, 11 - 13 Ağustos 2018, (Tam Metin Bildiri)

Atmospheric Pressure To High Vacuum Detection Of Materials Using Time Of Flight Mass Spectrometer

GÜNDOĞDU Y., KEPCEOĞLU A., TAŞER M., KILIÇ H. Ş.

IV. YUKPOP- Uluslararası Vakum Çalıştayı, AFYON, Türkiye, 28 - 30 Mart 2016, (Özet Bildiri)

Structural and Luminescence Properties of Zinc Stannate Nanoparticles Synthesized via Sol-Gel and Flame Spray Pyrolysis Technique

II. INTERNATIONAL UNIVERSITY INDUSTRY COOPERATION, RD AND INNOVATION CONGRESS, Manisa, Türkiye, 14 - 15 Kasım 2018, (Özet Bildiri)

Investigation Of Wear Behavior On Tool Steels

Erdem E., Uyulgan B., Öztürk K., Saf O.

The 8th International Symposium on Innovative Technologies in Engineering and Science (ISITES2020), Bursa, Türkiye, 23 - 25 Ekim 2020, cilt.3, ss.52-61, (Tam Metin Bildiri)

Characterization of ZnO-CuO-Al2O3 Thin Films by Sol-gel Technique for Gas Sensor

EBEOĞLUGİL M. F., BİRLİK I., ÇULHA O., özyağlı g., ÇELİK E.

10th ECERS International Conference and Exhibition of the European Ceramic Society, Berlin, Almanya, 15 - 18 Haziran 2007, (Özet Bildiri)

Fabrication and Characterization of High Sensitive Flexible β-PVDF Based Piezoelectric Nanogenerator

Zeyrek Ongun M., Paralı L., Oğuzlar S., Yıldırım S.

1st International Balkan Congress IBCC 2018, Edirne, Türkiye, 17 - 20 Eylül 2018, (Özet Bildiri)

Investigation Of Molecular Isomers With Femtosecond Laser Mass Spectrometry FLMS

GÜNDOĞDU Y., TAŞER M., KEPCEOĞLU A., KILIÇ H. Ş.

7 th International Conference on Technologies ICAT’18, Antalya, Türkiye, 28 Nisan - 01 Mayıs 2018, (Tam Metin Bildiri)

Optimizing Current Density and Concentration Parameters for Zn-Co Alloy Coatings

YILDIRIM S., DİKİCİ T., ARITMAN İ.

4th International Turkish World Engineering and Science Congress, Antalya, Türkiye, 30 Kasım - 03 Aralık 2023, (Tam Metin Bildiri)

PRODUCTION OF LUFFA CYLINDRICA REINFORCED SILK FIBROIN/CHITOSAN HYDROGEL SCAFFOLDS FOR CARTILAGE TISSUE DEFECTS

Ozer İ. E., ZİYLAN A., ÇOLPANKAN O., Baysan G., HAVITÇIOĞLU H.

19.Uluslararası Metalurji ve Malzeme Kongresi, İstanbul, Türkiye, 25 - 27 Ekim 2018, (Tam Metin Bildiri)

Preparation of SiO2 Nanoparticles and Its Beneficial Role in Grinding

YILDIRIM S., Bardakçıoğlu O., Koç Delice T., YİĞİT R., AK AZEM N. F., BİRLİK I.

10th Nanoscience and Nanotechnology Conference, İstanbul, Türkiye, 17 Haziran 2014, ss.433, (Özet Bildiri)

Preparation and characterization of SiO2 nanofluid by flame spray system for machining process

AK AZEM N. F., BİRLİK I., YİĞİT R., EROL M., YILDIRIM S., ÇELİK E.

VIII. Uluslararası Katılımlı Seramik Kongresi, Afyon, Türkiye, 22 - 24 Kasım 2012, cilt.14, ss.471-478, (Tam Metin Bildiri)

Electrochemical behaviour of plasma electrolytic oxidized WE43 and Elektron 21 magnesium alloys

ATAGÜR M., TEKİN K. C., MALAYOĞLU U., SHRESTHA S.

The European Corrosion Congress, 9 - 13 Eylül 2012, (Tam Metin Bildiri)

Refrakter Metal ve Alaşımlarının Oksitlenme Davranışının Mikroyapısal İncelemesi

DOKUMACI E.

23. Ulusal Elektron Mikroskopi Kongresi, Antalya, Türkiye, 19 - 21 Mayıs 2017, ss.51, (Özet Bildiri)

Comparison of Structural and Optical Properties of Flame Spray Pyrolysis and Sol-Gel Derived SrAl2O4:Eu2+/Dy3+ Phosphorus

Gültekin S., Yıldırım S., Yılmaz O., Çelik E.

IV INTERNATIONAL CONFERENCE ON ENGINEERING AND NATURAL SCIENCES (ICENS), Kyyiv, Ukrayna, 2 - 06 Mayıs 2018, (Özet Bildiri)

Theoretical Calculations on Electron Spin Resonance ESR Parameters of Liquid Phase Succinonitrile Molecule

EKİNCİOĞLU Y., KILIÇ H. Ş., DERELİ Ö.

10. ULUSLARARASI LÜMİNESANS VE ESR DOZİMETRİ KONGRESİ, Adana, Türkiye, 5 - 07 Eylül 2016, (Özet Bildiri)

Investigation the Effect of pH Value in GO Production

KANBUR K., BİRLİK I., SARGIN F., AK AZEM N. F., TÜRK A.

EUROASIA International Congress on Scientific Researches and Recent Trends-IX, Antalya, Türkiye, 18 Şubat 2022, ss.59-61, (Özet Bildiri)

A356 Aluminyum Alaşımında Ultrasonik Gaz Giderme Yönteminin Uygulanması

ÖNEL K., DOKUMACI E., EKEN C., AYBARÇ U.

1. Uluslararası Mühendislik, Mimarlık ve Tasarım Kongresi, Kocaeli, Türkiye, 13 - 14 Kasım 2015, ss.47-48, (Özet Bildiri)

aging temtature effect on hardness and microstructure of A357 aluminium alloy part wich produced by GDC and LPDC

özkan g., UYULGAN B.

1. International university industry cooperation, RD and inovation congress, 18 - 19 Aralık 2017, (Özet Bildiri)

Production of Lightweight Metals Containing High-Entropy Alloys via SHS Process

ALKAN M., DOKUMACI ALKAN E., Karakanat A.

Energy Technologies and CO2 Management symposium, 2025, held as part of the TMS Annual Meeting and Exhibition, TMS 2025, Nevada, Amerika Birleşik Devletleri, 23 - 27 Mart 2025, ss.185-198, (Tam Metin Bildiri)

Mechanıcal Alloyıng Of Cu2SnS3

Houimi A., YİĞİT GEZGİN S., KILIÇ H. Ş.

Turkish Physical Society 35th International Physics Congress, Bodrum-Muğla, Türkiye, 4 - 08 Eylül 2019, (Özet Bildiri)

An Experimental and Theoretical Comparison of PlasmonicProperties of Metallic Nano-Particles Have Different Morphological Properties

YİĞİT GEZGİN S., KEPCEOĞLU A., KÜÇÜKÇELEBİ H., KILIÇ H. Ş.

INTERNATIONAL CONGRESS ON SEMICONDUCTOR MATERIALS AND DEVICES, 17 - 19 Ağustos 2017, cilt.18, ss.1896-1902, (Tam Metin Bildiri)

An Experimental Investigatin Of Localised Surface Plasmonic Resonance Lspr For Cu Metal Nanoparticles Mn Depending As a Function Of Laser Pulse Number In Pulsed Laser Deposition PLD

YİĞİT GEZGİN S., KEPCEOĞLU A., KILIÇ H. Ş.

Turkish Physical Society 32nd International Physics Congress, Muğla-Bodrum, Türkiye, 6 - 09 Eylül 2016, (Özet Bildiri)

Investigation of The Effect of Different Machining Parameters on Surface Properties by Magnetic Barkhausen Noise

Gömek R., TEKİN K. C., Pihava E., Kazancı E., MALAYOĞLU U.

12th International Conference on Barkhausen Noise and Micromagnetic Testing, 24 Eylül - 26 Aralık 2017, (Tam Metin Bildiri)

Investigation of tribological properties of plasma electrolytic oxidation PEO coated Mg alloys

TEKİN K. C., ÇAKMAK E., MALAYOĞLU U., SHRESTHA S.

Euromat 2009, 7 - 10 Ekim 2009, (Özet Bildiri)

Effect of Zn Substitution on Bioactivity Properties of Cap Coatings

Bakın B., TİRİÇ U., Koç Delice T., BİRLİK I., AK AZEM N. F.

15th International Materials Symposium (IMSP’2014), Denizli, Türkiye, 15 - 17 Ekim 2014, ss.147, (Özet Bildiri)

Preparation and characterization of TiO2 nanofluid by sol gel method for cutting tools

Birlik I., Ak Azem N. F., Yiğit R., Erol M., Yıldırım S., Yurddaşkal M., et al.

VIII. Uluslararası Katılımlı Seramik Kongresi, Afyonkarahisar, Türkiye, 22 - 24 Kasım 2012, (Özet Bildiri)

Manufacturing and Development of TiO2 Reinforced Nanocomposite Resin Used in 3D Printing

Özler B., Yıldız D. B., Yıldırım S.

3rd International Turkish World Engineering and Science Congress, Ankara, Türkiye, 22 - 24 Ekim 2021, ss.541-548, (Tam Metin Bildiri)

SENSOR PROPERTIES OF ZnO THIN FILMS OBTAINED BY ANODIZATION AND SOL GEL METHODS

Yılmaz O., Ebeoğlugil M. F.

2ND INTERNATIONAL "ARTEMIS" CONGRESS ON LIFE,SOCIAL,HEALTH AND SPORTS SCIENCES, 17 Aralık 2022, ss.59-66, (Tam Metin Bildiri) Sürdürülebilir Kalkınma

Structural and electrochemical characterization of HAP coatings electrophoretically deposited on Ti6AL4V alloy substrates

Tiriç U., BİRLİK I., Koç Delice T., AK AZEM N. F.

HAZARFEN International Science, Mathematics and Engineering Sciences Congress, İzmir, Türkiye, 8 - 10 Kasım 2019, (Tam Metin Bildiri)

Su Bazlı Metilen Mavisi Çözeltisinin Fotokatalitik Parçalanması İçin K2La2Ti3O10 Filmlerin Üretimi

EROL M., başkurt ç. g., öner g., PALA A., ÇELİK E.

8.uluslararası Katılımlı Seramik Kongresi, AFYON, Türkiye, 22 - 24 Kasım 2012, cilt.14, ss.423-427, (Özet Bildiri)

Effect of Zn Substitution to Corrosion Behaviour of CaP Coatings on Ti6Al4V Substrates

Bakın B., TİRİÇ U., Koç Delice T., BİRLİK I., AK AZEM N. F.

2nd Internatıonal Surface Treatment Symposium, İstanbul, Türkiye, 25 - 27 Haziran 2014, ss.75, (Özet Bildiri)

Wear and friction properties of multilayer hard coatings by HTCVD method

Yiǧit R., Özdemir I., ÇELİK E., UYULGAN B., Aksoy T.

Proceedings of the 8th Conference and Exhibition of the European Ceramic Society, İstanbul, Türkiye, 29 Haziran - 03 Temmuz 2003, ss.585-588, (Tam Metin Bildiri)

3D Baskılı Polimer Kompozitlerin Fotokatalitik Performansı: Matris Malzemesinin Etkisi

Özler B., Güler S., Yavaş A., Yıldırım S.

7th International Students Science Congress , İzmir, Türkiye, 12 - 13 Mayıs 2023, ss.313-319, (Tam Metin Bildiri) Sürdürülebilir Kalkınma

The effects of artificial ageing conditions on A356 aluminum cast alloys

Özaydın O., DOKUMACI E., Armakan E., Kaya A.

ECHT 2019, Heat Treatment and Surface Engineering for Automotive, Bardolino, İtalya, 5 - 07 Haziran 2019, cilt.64, ss.1-10, (Tam Metin Bildiri)

Composition of dentin after different surface treatments and bonding application

SUBAŞI M. G., DEMİR N., YAVUZ T., KARCI M., ÖZTÜRK A. N., KILIÇ H. Ş.

39th Annual Conference of the European Prosthodontic Association, PRAG, Çek Cumhuriyeti, 3 - 05 Eylül 2015, ss.110, (Özet Bildiri)

Corrosion Protection of Ni-Ti02 Nanocomposite Coatings

Koç Delice T., YILDIRIM S., Bardakçıoğlu O., DİKİCİ T., TOPARLI M., ÇELİK E., et al.

XI. Nanoscience and Nanotechnology Conference (NanoTR-11), Ankara, Türkiye, 22 - 25 Haziran 2015, (Tam Metin Bildiri)

Determination of paramagnetic centers in archeological pottery of Turkey An ESR Study

SAYIN Ü., GAMZE B., IŞIK İ., TOYODA S., ÖZMEN A., KILIÇ H. Ş.

14th LED, 7-11 July 2014, Montreal, CANADA (Oral Presentation), Montreal, Kanada, 7 - 11 Temmuz 2014, (Özet Bildiri)

Production and Characterization of NiOx powders by Sol-Gel Method forUsing as Sputtering Target Materials

Uzunbayır B., Erol M., Karakaya A., Solmaz C., Bursa F., Ortaş O., et al.

3rd International Students Science Congress, İzmir, Türkiye, 3 - 04 Mayıs 2019, (Özet Bildiri)

Quince Seed Gel / Carboxymethyl Chitosan Based Scaffolds for Tissue Engineering Applications

İnal G., Ziylan A., Çolpankan Güneş O.

International Congress on Biological and Health Sciences, İzmir, Türkiye, 26 - 28 Şubat 2021, ss.244, (Özet Bildiri)

Refrakter metal esaslı alaşımların yüksek sıcaklık oksitlenmesi

DOKUMACI E., ÖNAY A. B., GÜRBÜZ A.

11. Uluslararası Korozyon Sempozyumu, İzmir, Türkiye, 22 - 24 Ekim 2008, ss.614-619, (Tam Metin Bildiri)

Gaz Sensörleri İçin Sol-jel Yöntemiyle Cam Altlıklar Üzerine Cu:SnO2 Filmlerin Üretilmesi ve Karakterizasyonu

elbeyli s., EROL M., BİRLİK I., EBEOĞLUGİL M. F., MERMER Ö., YİĞİT R., et al.

8.uluslararası Katılımlı Seramik Kongresi, AFYON, Türkiye, 22 - 24 Kasım 2012, cilt.14, ss.407-416, (Özet Bildiri)

Production and Oxidation of Nb‐Cr‐Ti Ternary Alloy

DOKUMACI E., EROĞLU E. Z.

15th International Metallurgy and Materials Congress (IMMC 15), İstanbul, Türkiye, 11 - 13 Kasım 2010, ss.1897-1900, (Tam Metin Bildiri)

A THEORETICAL STUDY ON CIGS SOLAR CELL PRODUCED USING PULSE LASER DEPOSITION TECHNIQUE

YİĞİT GEZGİN S., KILIÇ H. Ş., GÜNDOĞDU KABAKCI Y.

10th International European Conference on Interdisciplinary Scientific Research, Zürich, İsviçre, 27 - 29 Ağustos 2024, (Tam Metin Bildiri)

Femtosecond Laser Based Analysis Using Statistical Approaches To Discrimination of Tissue Types

GÜNDOĞDU Y., KARABAĞLI P., ALPTEKİN H., ŞAHİN M., KILIÇ H. Ş.

SCON World Congress on Optics, Photonics and Laser Technologies, Singapore, Singapur, 17 - 18 Şubat 2020, (Özet Bildiri)

Microstructure And Electrical Properties Of Ce2O And TiO2 Doped Zno Varistor Ceramics

Öztürk S., Atagür M., Dikici T., Yıldırım S., Sütçü M.

International Porous and Powder Materials Symposium and Exhibition (PPM 2013), İzmir, Türkiye, 3 - 06 Eylül 2013, ss.303, (Özet Bildiri)

Dissociative Ionization and Angular Distributions of CS2 and Its Ions

GRAHAM P., LEDINGHAM K., SINGHAL R., SMITH D., MCCANY T., KILIÇ H. Ş., et al.

Nineth International Resonance Ionization Spectroscopy, at RIS;96, State College, PA, June 30-July 5, 1996., AIP Conference Proceeding 454, pp:341-344 (1998)., PENSİLVANYA, Amerika Birleşik Devletleri, 05 Temmuz 1996, cilt.454, ss.341-344, (Özet Bildiri)

Puls Laser Depozisyon PLD Sistemi Kullanılarak C60 İnce Filmlerinin Üretimi ve Karakterizasyonu

EKİNCİ L., KEPCEOĞLUE A., YİĞİT GEZGİNK S., GÜNDOĞDUY Y., AKBAŞ M., DURMUŞ H., et al.

Turkish Physical Society 31th International Physics Congress, Poster Presentation, , Muğla, Turkey., Muğla, Türkiye, 22 - 24 Temmuz 2014

Nanometric measurement of the pre nano scale TiO2 powders via flame spray pyrolysis: Synthesis, properties and photocatalytical decomposition of methylen blue

Erol M., Yurddaşkal M., Yıldırım S., Mermer Ö., Bas G., Çakmakçı M., et al.

20th IMEKO World Congress 2012, Busan, Güney Kore, 9 - 14 Eylül 2012, cilt.3, ss.1771-1776, (Tam Metin Bildiri)

Numerical study for the quaternary semiconductor based heterojunction solar cell modelled with the SCAPS-1D program

YİĞİT GEZGİN S., GÜNDOĞDU Y., KILIÇ H. Ş.

9 th International Conference on Computational and Eperimental Science and Engineering (ICCESEN-2022), Antalya, Türkiye, 28 - 31 Ekim 2022, (Tam Metin Bildiri)

DFT Study On The Electron Spin Resonance Parameters Of The 3 Nitroacetanilide

KEPCEOĞLU A., KILIÇ H. Ş., DERELİ Ö.

10. ULUSLARARASI LÜMİNESANS VE ESR DOZİMETRİ KONGRESİ, Adana, Türkiye, 5 - 07 Eylül 2016, (Özet Bildiri)

Preparation and Characterization of TiO2 Nanoparticles by Sol-gel Method for Grinding Fluids

Bardakçıoğlu O., YILDIRIM S., Koç Delice T., YİĞİT R., AK AZEM N. F., BİRLİK I.

10th Nanoscience and Nanotechnology Conference, İstanbul, Türkiye, 17 Haziran 2014, ss.431, (Özet Bildiri)

NONLINEAR OPTICAL BEHAVIORS OF 5-((2,4- DIHYDROXYBENZYLIDENE)AMINO)ISOPHTHALIC ACID (2,4HB-5AIP) WITH SCHIFF BASE STRUCTURES

GÜNDOĞDU Y., ALDOORI B., KÜÇÜKKOLBAŞI S., KILIÇ H. Ş.

AL-FARABI 4th INTERNATIONAL CONGRESS ON APPLIED SCIENCES, Erzurum, Türkiye, 19 - 21 Ağustos 2022, (Tam Metin Bildiri)

High Temperature Yb2O3-ZrO2 Insulation Coatings on Ag Tapes for Magnet Technology

kaplan m., EBEOĞLUGİL M. F., BİRLİK I., YİĞİT R., ÇELİK E., AVCI E.

8. Uluslararası Katılımlı Seramik Kongresi 2012, Afyonkarahisar, Türkiye, 22 - 24 Kasım 2012, cilt.14, ss.117-128, (Tam Metin Bildiri)

AlCoCrFeNi-Based High-Entropy Superalloy Coating Applied onto the Surface of Al-Alloys

ALKAN M., DOKUMACI ALKAN E., Ari G.

154th Annual Meeting and Exhibition of The Minerals, Metals and Materials Society, TMS 2025, Nevada, Amerika Birleşik Devletleri, 23 - 27 Mart 2025, ss.449-457, (Tam Metin Bildiri)

A New Laser Procedure for Differenet Restorative Material Surface Roughness

DUYAN H., ASLAN E. M., GÜLTAŞ İ., YÖNDEM İ., KILIÇ H. Ş.

4TH NATIONAL, 2ND INTERNATIONAL STUDENTS RESEARCH DAYS, İstanbul, Türkiye, 10 - 13 Nisan 2015, (Özet Bildiri)

DEPOSITION OF NiOx and LiNiOx THIN FILMS BY RF MAGNETRON SPUTTER METHODS FOR USING IN PEROVSKITE SOLAR CELLS

Akalın S. A., Erol M., Uzunbayır B., Oğuzlar S., Yıldırım S.

III. Ulusal Üniversite Sanayi İşbirliği AR-GE ve İnovasyon Kongresi, Manisa, Türkiye, 29 Aralık 2020, (Özet Bildiri)

Optimization of Oxidation Time During Graphene Oxide Production

KANBUR K., BİRLİK I., SARGIN F., AK AZEM N. F., TÜRK A.

7th International Students Science Congress, İzmir, Türkiye, 12 - 13 Mayıs 2023, ss.307-312, (Tam Metin Bildiri)

MATERIAL SELECTION AND PRODUCTION FROM DIFFERENT GROUP OF MATERIAL FOR THE NEUROSTIMULATOR

Yılmaz O., Dalmış R., Çelik E.

3. INTERNATIONAL CONGRESS ON LIFE, SOCIAL, AND HEALTH SCIENCES IN A CHANGING WORLD, İstanbul, Türkiye, 13 - 14 Kasım 2021, ss.240-248, (Tam Metin Bildiri)

Coating of Metallic Implant Surfaces with Poly HEMA GDMA Hydrogel via Electropolymerization Technique

KAHRAMAN N. A., ALBAYRAK A., MALAYOĞLU U.

16th International Metallurgy and Materials Congress, 13 - 15 Eylül 2012

A356 ALAŞIMINDA KALIP VE DÖKÜM SICAKLIĞININ SICAK YIRTILMAYA OLAN ETKİSİNİN İNCELENMESİ

Eşki A., Uyulgan B., Doğdu B., Kalender C.

2. Uluslararası Mühendislik ve Fen Bilimleri Kongresi, İstanbul, Türkiye, 16 Aralık 2023, ss.68-77, (Tam Metin Bildiri)

Development of Structural Color Photonic Crystal Instead of Traditional Paints

DALMIŞ R., AK AZEM N. F., BİRLİK I., ÇELİK E.

The International Porous and Powder Materials Symposium and Exhibition, Aydın, Türkiye, 12 - 15 Eylül 2017, ss.46, (Özet Bildiri)

Thermodynamic and Microstructural Investigations of AlCoCrFeNi(Ti)x Based High-Entropy Alloys

Dokumacı Alkan E., Alkan M., Dirican O., Köse M. N., Kartopu A.

21st International Metallurgy and Materials Congress, İstanbul, Türkiye, 6 - 08 Ekim 2022, ss.456, (Özet Bildiri)

Ni Esaslı Nanokompozit Kaplamaların Puls Elektroçöktürme Yöntemi ile Üretilmesi ve Karakterizasyonu

AK AZEM N. F., Kahraman C. E., BİRLİK I., Koç Delice T.

4. Çukurova Uluslararası Bilimsel Araştırmalar Kongresi, Adana, Türkiye, 21 - 23 Şubat 2020, (Özet Bildiri)

DEVELOPMENT OF FLAME RETARDANT GLASS FIBER REINFORCED POLYESTER COMPOSITES

ÇOLPANKAN O., GÖMEK R., TAMAR A., KANDEMİR O. K., KARAORMAN A., ZİYLAN A.

5th INTERNATIONAL POLYMERIC COMPOSITES SYMPOSIUM AND WORKSHOPS, 2 - 04 Kasım 2017, (Özet Bildiri)

Femtosecond Laser Mass Spectrometry FLMS

MCCANY T., LEDINGHAM K., SMITH D., KILIÇ H. Ş., SINGHAL R., KOSMIDIS C., et al.

The Meeting of I.O.P., Leeds (1997)., 6 - 09 Temmuz 1997, (Özet Bildiri)

Processing and Mechanical Properties of High-Entropy-Alloy Reinforced Al-Alloy

DOKUMACI ALKAN E., ALKAN M., Aybarc U.

Light Metals Symposium held at the TMS Annual Meeting and Exhibition, TMS 2025, Nevada, Amerika Birleşik Devletleri, 23 - 27 Mart 2025, ss.374-380, (Tam Metin Bildiri)

Synthesis and properties of nano scale MgO powders via flame spray pyrolysis for graphene production as a catalyzor material

Yıldırım S., Yurddaşkal M., Öztürk B., Batar T., Çelik E.

VIII. Uluslararası Katılımlı Seramik Kongresi, Afyonkarahisar, Türkiye, 22 - 24 Kasım 2012, ss.60, (Özet Bildiri)

Effect of Temperature on Electrochemically Deposited HAP Films on CoCrMo Substrate

Cagar P. K., AK AZEM N. F., MALAYOĞLU U., Cakir A.

14th National Biomedical Engineering Meeting, İzmir, Türkiye, 20 - 22 Mayıs 2009, ss.300-303, (Tam Metin Bildiri)

Structural and Luminescence Properties of Undoped and Zn-doped SnO2 Nanoparticles Synthesized by the Flame Spray Technique

Oğuzlar S., Zeyrek Ongun M., Akalın S. A., Yıldırım S.

2nd International Students Science Congress, İzmir, Türkiye, 4 - 05 Mayıs 2018, (Özet Bildiri)

Characterization of undoped and Eu3 doped CeO2 synthesized by sol-gel and flame spray pyrolysis methods

International Eurasian Conference on Science, Engineering and Technology EurasianSciEnTech 2018, Ankara, Türkiye, 22 - 23 Kasım 2018, (Özet Bildiri)

SIMULATION AND DESIGN OF A HG/CD/TE HOMOJUNCTION INFRARED PHOTODETECTOR

TUNA A., YİĞİT GEZGİN S., GÜNDOĞDU Y., KILIÇ H. Ş.

8th INTERNATIONAL BLACK SEA COASTLINE COUNTRIES SCIENTIFIC RESEARCH CONFERENCE, Sofya, Bulgaristan, 29 - 30 Ağustos 2022, (Tam Metin Bildiri)

Reducing Energy Consumption During Heat Treatment of Cast Aluminum Alloys – Optimization of Process Parameters Through CALPHAD

Çinkılıç E., Dokumacı Alkan E., Kavalcı B. N., Anavatan Ş., Yaşar B., Ammas G.

21st International Metallurgy and Materials Congress, İstanbul, Türkiye, 6 - 08 Ekim 2022, ss.408, (Özet Bildiri)

Production and Characterization of Graphene Oxide by Ultrasound-Assisted Hummers Method

SARGIN F., AK AZEM N. F., KANBUR K., BİRLİK I., TÜRK A.

Cukurova 8th International Scientific Researches Conference, Adana, Türkiye, 15 Nisan 2022, ss.1000-1009, (Tam Metin Bildiri)

The Potential For Femtosecond Laser Mass Spectrometry

KILIÇ H. Ş., LEDINGHAM K., SMITH D., WANG S., MCCANNY T., SINGHAL R., et al.

The 22nd Annual Meeting of British Mass Spectrometry (BMSS), 8-11 Eylül 1996, Meeting Proceedings, P:146 (1996)., 8 - 11 Eylül 1996, (Özet Bildiri)

Cyclic Oxidation Behavior of c-BN and h-BN at Elevated Temperatures

ÖZKAN İ., DOKUMACI E., ÖNAY A. B.

7th International Advances in Applied Physics and Materials Science Congress Exhibition (APMAS2017), Fethiye, Türkiye, 22 - 26 Nisan 2017, ss.41, (Özet Bildiri)

Coating of 316L Stainless Steel with HEMA and Glycerol Dimethacrylate via Electropolymerization to Improve Bio compatibility

KORSACILAR D., ALBAYRAK A., MALAYOĞLU U.

24th International Conference on Surface Modification Technologies, 7 - 09 Eylül 2010

The Effect of The Scale Factor on AlCoCrFeNi based High-Entropy Alloys Produced via a Self-Propagating High-Temperature Synthesis Method

Alkan M., Dokumacı Alkan E., Çinkılıç E.

21st International Metallurgy and Materials Congress, İstanbul, Türkiye, 6 - 08 Ekim 2022, ss.455, (Özet Bildiri)

DEVELOPMENT OF FISH SCALE REINFORCED PHBV NANOFIBROUSSPONGE-LIKE SCAFFOLD FOR BONE TISSUE REGENERATION

ÇOLPANKAN O., KARA A., ZİYLAN A., HAVITÇIOĞLU H., BİLİCİ G., ERBİL G.

European Congress and Exhibition on Advanced Materials and Processes (EUROMAT 2017 Congress), 17 - 22 Eylül 2017, (Özet Bildiri)

Production and SEM Characterization of Nanosize Deposits

ÖZKAN İ., DOKUMACI E., KARADAŞ V., ÖNAY A. B.

11th International Materials Symposium, Denizli, Türkiye, 19 - 23 Nisan 2006, ss.558-561, (Tam Metin Bildiri)

The effect of Ag plasmonic nanoparticles embedded into the active layer by pulsed laser deposition

KILIÇ H. Ş., YİĞİT GEZGİN S.

International Conference on Photovoltaic Science and Technologies, PVCON-2018, Ankara, Türkiye, 4 - 06 Temmuz 2018, (Özet Bildiri)

Effect of nitrogen doping on photocatalytic properties of TiO2 nanoparticles

KESKİN Ö. Y., dagdelen d., BİRLİK I., AK AZEM N. F.

14th NANOSCIENCE AND NANOTECHNOLOGY CONFERENCE, İzmir, Türkiye, 22 - 25 Ekim 2018, (Özet Bildiri)

High Temperature Oxidation of TiB2 and ZrB2

ÖZKAN İ., DOKUMACI E., SANCAKOĞLU O., ÖNAY A. B., Tekdaş S.

11. Uluslararası Korozyon Sempozyumu, İzmir, Türkiye, 22 - 25 Ekim 2008, ss.448-455, (Tam Metin Bildiri)

Effect of boron addition on microstucture and mechanical properties of Ti 40Nb alloy

DOKUMACI E., ELDEN E.

European Congress and Exhibition on Advanced Materials and Processes, Varşova, Polonya, 20 - 24 Eylül 2015, ss.2234, (Özet Bildiri)

Interpretatıon Of Mass Spectra Usıng Factor Analysıs

KILIÇ H. Ş.

Turkish Physical Society 32nd International Physics Congress, Muğla-Bodrum, Türkiye, 6 - 09 Eylül 2016, (Özet Bildiri)

Production of glass cullets in the system Na2O-B2O3-SiO2 by using rice husk ash

ÖZKAN İ., DOKUMACI E.

3rd International Conference on Materials Science, Mechanical and Automotive Engineerings and Technology (IMSMATEC 2020), Nevşehir, Türkiye, 24 Haziran 2020, ss.438, (Özet Bildiri)

Havacılık Uygulamalarında Kullanılan Hafif Alaşımların Plazma Elektrolitik Oksidasyonu

EROĞLU E. Z., DOKUMACI E., ÖNAY A. B.

II. Ulusal Havacılık Teknolojisi ve Uygulamaları Kongresi, İzmir, Türkiye, 29 - 30 Kasım 2013, (Özet Bildiri)

Investigation Of Corrosion Behavior On Plastic Mold Steel

ÖZTÜRK K., UYULGAN B., ERDEM E., SAF O.

The 8th International Symposium on Innovative Technologies in Engineering and Science (ISITES2020), Bursa, Türkiye, 23 - 25 Ekim 2020, cilt.3, ss.25-34, (Tam Metin Bildiri)

Şekil Hafızalı Ni‐Ti ve Ti‐Nb‐Al Alaşımlarının Üretimi

15th International Metallurgy and Materials Congress (IMMC 15), İstanbul, Türkiye, 11 - 13 Kasım 2010, ss.1179-1184, (Tam Metin Bildiri)

Pulsed Laser Deposition System And Morphological Crystal And Optical Properties Of Thin Films Produced,

YİĞİT GEZGİN S., GÜNDOĞDU Y., KILIÇ H. Ş.

7 th International Conference on Technologies ICAT’18 (28 April-1 May), 28 Nisan - 01 Mayıs 2018, (Özet Bildiri)

Alçak Basınçlı Döküm Teknolojisinde Ergitme Fırını ve Transfer Potası Dibinde Biriken Kalıntıların İncelenmesi ve Oluşumlarının Önlenmesi

GÜNEREN A., KARAALİ U., YAY B., DOKUMACI E., BİROL Y., ÖNAY A. B., et al.

7. Aluminyum Sempozyumu, İstanbul, Türkiye, 8 - 09 Ekim 2015, ss.250-258, (Tam Metin Bildiri)

Development of Ni Based Nanocomposite Coatings with SiO2 Nanoparticles

DALMIŞ R., BİRLİK I., AK AZEM N. F., Koç Delice T., ÇELİK E.

13th Nanoscience Nanotechnology Conference, Antalya, Türkiye, 22 - 25 Ekim 2017, ss.171, (Özet Bildiri)

Various Drying Methods for Producing Graphene Oxide Structure

KANBUR K., BİRLİK I., SARGIN F., AK AZEM N. F., TÜRK A.

Hodja Akhmet Yassawi 6th International Conference on Scientific Research, Lankaran, Azerbaycan, 13 Mayıs 2022, ss.387-395, (Tam Metin Bildiri)

Preparation and characterization of TiO2 nanofluıd by sol-gel method for cutting tools

Birlik I., Ak Azem N. F., Yiğit R., Erol M., Yıldırım S., Yurddaşkal M., et al.

VIII. CERAMIC CONGRESS WITH INTERNATIONAL PARTICIPITATION, Afyonkarahisar, Türkiye, 22 - 24 Kasım 2012, (Tam Metin Bildiri)

Cu2SnS3(CTS) Nanoparticle Production with Laser Ablation Method and Nonlinear Optical Properties

KILIÇ H. Ş., GÜNDOĞDU Y., HOUIMI A., YİĞİT GEZGİN S.

28th International conference on Innovations in “Science, Engineering and Technology” (BISET-21), Barcelona, İspanya, 13 Ekim - 15 Aralık 2021, (Tam Metin Bildiri)

AN INVESTIGATION OF OPTICAL PROPERTIES OF CADMIUM SULFATE (CdS) THIN FILMS PRODUCED BY PULSED LASER DEPOSITION (PLD) TECHNIQUE

KILIÇ H. Ş., GÜNDOĞDU KABAKCI Y., YİĞİT GEZGİN S.

10th International European Conference on Interdisciplinary Scientific Research, Zürich, İsviçre, 27 - 29 Ağustos 2024, (Tam Metin Bildiri)

Investigation of the Effect of Vacuum Drying Conditions on Graphene Oxide Production

SARGIN F., AK AZEM N. F., KANBUR K., BİRLİK I., TÜRK A.

16. MAS International European Conference on Mathematics, Engineering, Natural Medical Sciences, Mardin, Türkiye, 22 Şubat 2022, ss.485-486, (Özet Bildiri)

Recycling waste clay and rice husk ash in production of low density ceramics

ÖZKAN İ., DOKUMACI E.

3rd International Conference on Materials Science, Mechanical and Automotive Engineerings and Technology (IMSMATEC 2020), Nevşehir, Türkiye, 24 Haziran 2020, ss.370, (Özet Bildiri)

Farklı Döküm Aşamalarındakı Sıvı Metal Akışkanlığının İncelenmesi

Kaya A. Y., Özaydın O., DOKUMACI E., Armakan E.

TÜDÖKSAD 2. ULUSAL DÖKÜM KONGRESİ, İzmir, Türkiye, 30 Kasım - 01 Aralık 2019, ss.215-221, (Tam Metin Bildiri)

PRODUCTION OF TWO DIFFERENT METAL OXIDES BY SOL GEL METHOD AND DETERMINATION OF THEIR DIELECTRIC PROPERTIES

Yılmaz O., Dalmış R.

6. INTERNATIONAL ISTANBUL SCIENTIFIC RESEARCH CONGRESS, İstanbul, Türkiye, 30 - 31 Ekim 2021, ss.264-277, (Tam Metin Bildiri)

Sn3O4 Thın Fılms Deposıted By Pulsed Laser Deposıtıon,

Houimi A., YİĞİT GEZGİN S., KILIÇ H. Ş.

Turkish Physical Society 35th International Physics Congress, Bodrum-Muğla, Türkiye, 4 - 08 Eylül 2019, (Özet Bildiri)

Çelik Tahkimat Profillerinde Ülke Standartlarının Değerlendirilmesi

YILMAZ O., DEMİRCİ S., DİKİCİ T., EBEOĞLUGİL M. F.

The 7th International Congress of Mining Machinery and Technologies (IMMAT), İzmir, Türkiye, 23 - 26 Ekim 2019, (Tam Metin Bildiri)

High Temperature Oxidation Behavior of Nickel-Base Alloys

DOKUMACI E., ÖNAY A. B.

13. Uluslararası Metalurji ve Malzeme Kongresi, İstanbul, Türkiye, 9 - 11 Kasım 2006, ss.502-508, (Tam Metin Bildiri)

Production and Characterization of Refractory Metal Containing High Entropy Alloy

Uğurluer D., Alkan M., Dokumacı Alkan E., Karakanat A.

4th International Conference on Materials Science, Mechanical and Automotive Engineering and Technology (IMSMATEC 2021), Nevşehir, Türkiye, 28 - 30 Mayıs 2021, ss.146-149, (Tam Metin Bildiri)

The effect of the additives on the electrochemical behaviour of Plasma Electrolytic oxide coatings on commercially pure titanium

GENÇ E., KEPCEOĞLU A., DEMİREL KARS M., KILIÇ H. Ş.

1. Uluslararası yüzey işlemleri sempozyumu, 15 - 18 Temmuz 2011, (Tam Metin Bildiri)

Oxidation Behavior of Nb Containing Alloy

DOKUMACI E., ÖNAY A. B.

14.International Metallurgy and Materials Congress, İstanbul, Türkiye, 16 - 18 Kasım 2008, ss.1290-1295, (Tam Metin Bildiri)

Ni-TiO2 nanokompozit kaplamaların yapısal ve mekanik özellikleri

Bardakçıoğlu O., YILDIRIM S., Koç Delice T., DİKİCİ T., TOPARLI M., ÇELİK E., et al.

27. Ulusal Kimya Kongresi, Çanakkale, Türkiye, 23 - 28 Ağustos 2015, (Özet Bildiri)

Production of Tantalum Titanium and Platinum Thin Films for Domestic DNA Sensor Applications

3rd International Conference on Advanced Technology & Sciences, Konya, Türkiye, 1 - 03 Eylül 2016, (Özet Bildiri)

Ablation And Evaporation Rate Of Silver And Copper Targets By Nanosecond High Power Laser

GÜNDOĞDU Y., KILIÇ H. Ş., KEPCEOĞLU A., DOĞAN M.

Turkish Physical Society 30th International Physics Congress, Istanbul, Turkey., İstanbul, Türkiye, 24 - 26 Eylül 2013, (Özet Bildiri)

Study on Oxidation Performance of Graphene Oxide Structures by optimization of KMnO4

Sargın F., Ak Azem N. F., Kanbur K., Birlik I., Türk A.

Al-Farabi 4th International Congress on Applied Sciences , Erzurum, Türkiye, 19 - 21 Ağustos 2022, ss.147-153, (Tam Metin Bildiri) Sürdürülebilir Kalkınma

Fabrication and Biocompatibility Analysis of Loofah / HAP / CMC Scaffolds for Bone Tissue Engineering

Türemiş C., Çolpankan Güneş O., Baysan G., Perpelek M., Ziylan A., Havıtçıoğlu H.

28th Annual Meeting European Orthopaedic Research Society Remote Attendance Virtual Congress, İzmir, Türkiye, 17 - 18 Eylül 2020, ss.621-627, (Tam Metin Bildiri)

Analysis of Some Molecular Isomers by Different Statistical Methods

KILIÇ H. Ş., LEDINGHAM K.

4th International Conference on Computational and Experimental Science and Engineering (ICCESEN 2017), 4 - 08 Ekim 2017, (Özet Bildiri)

Ni-SiO2 Nanokompozit Kaplamaların Üretimi ve Karakterizasyonu

AK AZEM N. F., BİRLİK I., Koç Delice T.

23. Ulusal Elektron Mikroskopi Kongresi, Türkiye, 19 - 21 Mayıs 2017, (Özet Bildiri)

CONDUCTIVITY AND MAGNETIC PROPERTIES OF COATED FABRICS WITH BARIUM FERRITE DOPED ANILINE SOLUTION

ONAR N., AKŞİT A., EBEOĞLUGİL M. F., BİRLİK I., ÇELİK E., özdemir i.

III. International Technical Textiles Congress, İstanbul, Türkiye, 1 - 02 Kasım 2007, ss.200-208, (Tam Metin Bildiri)

Coating of 316L Stainless Steel with Biocompatible Polymers to Have Bioactivity

KAHRAMAN N. A., MALAYOĞLU U., KOZACI L. D., ÇEÇEN B., ALBAYRAK A.

European Congress and Exhibition on Advanced Materials and Process, 8 - 13 Eylül 2013

THE EFFECT OF THE ETCHING SOLUTION TYPE ON ANODIC TIO2 PHOTOCATALYSIS

YILMAZ O., EBEOĞLUGİL M. F., DALMIŞ R., DİKİCİ T.

3. INTERNATIONAL CONGRESS ON LIFE, SOCIAL, AND HEALTH SCIENCES IN A CHANGING WORLD, Türkiye, 13 - 14 Kasım 2021, (Tam Metin Bildiri)

Thermodynamic and Experimental Investigation of AlCoCrFeNiTi based High-Entropy Alloys

Alkan M., Dokumacı Alkan E., Güler S.

21st International Metallurgy and Materials Congress, İstanbul, Türkiye, 6 - 08 Ekim 2022, ss.440, (Özet Bildiri)

The Effect Of Laser Polarization Angle On Ionisation Dynamics Of Nitromethane CH3NO2

GÜNDOĞDU Y., KÖKLÜ N., KEPCEOĞLU A., TAŞER M., KILIÇ H. Ş.

Turkish Physical Society 32nd International Physics Congress, Muğla-Bodrum, Türkiye, 6 - 09 Eylül 2016, (Özet Bildiri)

Femtosecond Laser Ablation Synthesis Of Nanoparticles And Nano-Alloys In Ethanol Medium

GÜNDOĞDU Y., KEPCEOĞLU A., YİĞİT GEZGİN S., KILIÇ H. Ş.

International Congress on Semiconductor Materials and Devices” (ICSMD-2017)- 17-19 Agustos 2017, 17 - 19 Eylül 2017, (Özet Bildiri)

Graphite Nanoparticles Reinforced Polymeric Nanocomposites for Flexibles temperature Sensors

Erol M., Yurddaşkal M., Mermer Ö., Çelik E.

8th Nanoscience and Nanotechnology Congress, Ankara, Türkiye, 25 - 29 Haziran 2012, (Özet Bildiri)

Plasmonic effects on the nonlinear optical properties of gold thin films

BAYIR S., KILIÇ H. Ş., KEPCEOĞLU A., GÜNDOĞDU Y., NALBANTOĞLU İ., YİĞİT GEZGİN S., et al.

9th International Physics Conference of the Balkan Physical Union, İstanbul University, İstanbul / Turkey, (Poster Presentation)., İstanbul, Türkiye, 24 - 28 Ağustos 2015, (Tam Metin Bildiri)

The Experimental Free Vibration Analysis of an Aluminum K Feldspar Metal Matrix Composite Plate

Daş O., Öztürk H., Kıral Z., Gören Kıral B., Yücel Öztürk Y., Uyulgan B., et al.

EURODYN2023, Amsterdam, Hollanda, 3 - 05 Temmuz 2023, ss.1-2, (Tam Metin Bildiri)

The effect of heat treatment stages on mechanical properties and microstructure of Sr‐modified A356 alloy

GÜNEREN A., DOKUMACI E., ÇUBUKLUSU E.

3rd International Material Science and Technology in Cappadocia (IMSTEC 2018), Nevşehir, Türkiye, 17 - 19 Eylül 2018, ss.385-390, (Tam Metin Bildiri)

An Investigation Of Localised Surface Plasmon Resonance Lspr Of Ag Nanoparticles Nps Produced By Pulsed Laser Deposition PLD Technique

YİĞİT GEZGİN S., KEPÇEOĞLU A., KILIÇ H. Ş.

Turkish Physical Society 32nd International Physics Congress, Muğla-Bodrum, Türkiye, 6 - 09 Eylül 2016, (Tam Metin Bildiri)

Preparation and Characterization of SiO2 Nanofluid by Flame Spray System for Machening Proces

Ak Azem N. F., Birlik I., Yiğit R., Erol M., Yıldırım S., Çelik E.

VIII. Uluslararası Katılımlı Seramik Kongresi, Afyonkarahisar, Türkiye, 22 - 24 Kasım 2012, cilt.14, ss.471-478, (Tam Metin Bildiri)

Plasmonic Tuning of gold doped thin films for layers of photovoltaic device

YİĞİT GEZGİN S., KILIÇ H. Ş., KEPCEOĞLU A., Bayır S., Nalbantoğlu İ. E., TOPRAK A., et al.

9th International Physics Conference of the Balkan Physical Union, İstanbul University, İstanbul / Turkey, (Poster Presentation)., İstanbul, Türkiye, 24 - 28 Ağustos 2015, (Tam Metin Bildiri)

Multiphoton Processes In Organic Molecules Using VUV Laser Photons

LEDINGHAM K., SINGHAL R. P., KILIÇ H. Ş., WANG S., MCCANNY T., Smith D., et al.

Rutherford Appleton Laboratory Annual Report, 1995-1996, Oxford, İngiltere, 01 Kasım 1995 - 03 Kasım 1996, cilt.19, ss.167

Production of antibacterial polypeptide nisin containing carboxymethylchitosan-alginate impregnated cotton hydrogel wound dressings

ÇOLPANKAN O., ZİYLAN A.

European Congress and Exhibition onAdvanced Materials and Processes (EUROMAT 2019 Congress), 1 - 05 Eylül 2019

Diagnostic Study on Lamb and Calf Colon Tissues Using Ti:Sapphire Femtosecond Laser Ablation for Biomedical Applications

GÜNDOĞDU Y., YİĞİT GEZGİN S., KILIÇ H. Ş.

International Antalya Scientific Research and Innovative Studies Congress, Antalya, Türkiye, 18 Aralık 2021, (Tam Metin Bildiri)

Production of HAP Coating on 316L Stainless Steel Substrates by Sol-gel Technique

AK AZEM N. F., Cakir A.

14th National Biomedical Engineering Meeting, İzmir, Türkiye, 20 - 22 Mayıs 2009, ss.304-307, (Tam Metin Bildiri)

Investigation The Utilization Of Rice Husk Ash In The Production Of Ceramic Coating Materials

Özkan İ., Dokumacı Alkan E.

3rd Global Conference on Engineering Research (GLOBCER’23), Balıkesir, Türkiye, 13 - 16 Eylül 2023, ss.495, (Özet Bildiri)

TiO2-ZnO nanopartikülleri ile elektroçöktürülmüş nikel nanokompozit kaplamaların üretimi ve karakterizasyonu

YILDIRIM S., Bardakçıoğlu O., Koç Delice T., DİKİCİ T., TOPARLI M., ÇELİK E., et al.

27.Ulusal Kimya Kongresi, Çanakkale, Türkiye, 23 - 28 Ağustos 2015, ss.729, (Özet Bildiri)

Synthesis of Zn-doped TiO2 Ceramic Nanoparticles by sol-gel technique

Bardakçıoğlu O., YILDIRIM S., Koç Delice T., TOPARLI M., ÇELİK E., BİRLİK I., et al.

IX. ULUSLARARASI KATILIMLI SERAMİK KONGRESİ, Afyon, Türkiye, 26 - 28 Kasım 2015, (Özet Bildiri)

The Potential of Femtosecond Laser Mass Spectrometry

LEDINGHAM K., SINGHAL R., KILIÇ H. Ş., MCCANNY T., SMITH D., WANG S., et al.

Rutherford Appleton Laboratory Annual Report, 1995-1996, 01 Ocak 1995 - 01 Ocak 1996, ss.165-166, (Özet Bildiri)

Elektroçöktürme yöntemiyle ZnO seramik nanopartiküllü nikel kaplamaların incelenmesi

AK AZEM N. F., BİRLİK I., Koç Delice T.

23.Ulusal Elektron Mikroskopi kongresi, Antalya, Türkiye, 19 - 21 Mayıs 2017, (Özet Bildiri)

Investigation of the Biocompatibility of AlCoCrFeNi high entropy alloys produced by vacuum arc melting

Güler S., Dokumacı Alkan E., Pulat G. O., Alkan M., Karaman O.

4th International Conference on Materials Science, Mechanical and Automotive Engineering and Technology (IMSMATEC 2021), Nevşehir, Türkiye, 28 - 30 Mayıs 2021, ss.154-156, (Tam Metin Bildiri)

NUCLEAR RADIATION SHIELDING PROPERTY OF RED MUD AND BISMUTH OXIDE COATED FABRICS

KARA Ş., EROL M., TAŞKÖPRÜ C., DURKAN K.

5. International Conference on Materials Science, Mechanical and Automotive Engineerings and Technology (IMSMATEC’22), Nevşehir, Türkiye, 03 Eylül 2022, (Tam Metin Bildiri)

Investigation of Mechanical Properties of SiC and Al2O3 Reinforcement in Aluminium Metal Matrix Composite Produced by Mechanical Stirrig Promoted with Ultrasonic Stirring Application

Aybarç U., Dışpınar D., Dokumacı Alkan E., Ertuğrul O., Seydibeyoğlu M. Ö.

19th International Metallurgy and Materials Congress, İstanbul, Türkiye, 25 - 27 Ekim 2018, ss.261-264, (Tam Metin Bildiri)

Sanayi atıkları ve yerli maden atıkları kullanılarak kurşun içermeyen tekstil esaslı nükleer koruyucu panellerin geliştirilmesi

Kara Ş., Erol M.

7. Bolu-Düzce Ar-Ge Proje Pazarı, Bolu, Türkiye, 24 Nisan 2025, (Yayınlanmadı) Sürdürülebilir Kalkınma

Production, characterization and magnetic properties of Bismuth-substituted Yttrium Iron Garnet layers prepared by sol-gel process

Erol M., ÖZTÜRK Y., Avgin I., Celik E.

International Conference on Superconductivity and Magnetism (ICSM), Side, Türkiye, 25 - 29 Ağustos 2008, cilt.153, (Tam Metin Bildiri)

Kompozit Malzeme Üretiminde Destek Materyali Olarak Kullanılabilecek Yeni Selüloz Esaslı Conium Maculatum Liflerinin Karakterizasyonu ve Modifikasyonu

SEKİ Y., KILINÇ A. Ç., DALMIŞ R., ATAGÜR M., KÖKTAŞ S.

2. Uluslararası Lif ve Polimer Araştırmaları Sempozyumu, Bursa, Türkiye, 27 - 28 Nisan 2017, (Tam Metin Bildiri)

Determination of Epinephrine by Voltammetric Method Using Carbon Paste Electrode Decorated with Modified CuO Nanoparticles

Delikoç T., Ak Azem N. F., Alpat Ş., Kılınç Alpat S.

4.EBAT, Antalya, Türkiye, 3 - 06 Kasım 2022, ss.125, (Özet Bildiri)

Surface functionalization of okra fibers: Ionic liquid modification

SEKİ Y., DALMIŞ R., KÖKTAŞ S., KILINÇ A. Ç.

3rd International Conference on Engineering Technology and Applied Sciences (ICETAS), 17 - 21 Temmuz 2018, (Tam Metin Bildiri)

Yüzey Modifikasyonu Gerçekleştirilmiş SiO2 Nanopartikül İlaveli 3B Yazıcı Reçinelerinin Geliştirilmesi

Yıldız D. B., Yıldırım S., Özler B.

The 16th International Scientific Research Congress - Science and Engineering, Ankara, Türkiye, 11 - 12 Mart 2023, ss.204-209, (Tam Metin Bildiri)

Machine Learning Design for Eutectic High-Entropy Alloys

Özcan E., Dokumacı Alkan E.

22nd International Metallurgy and Materials Congress, İstanbul, Türkiye, 19 - 21 Eylül 2024, ss.1, (Özet Bildiri)

A coating application of IN718 via self-propagating high-temperature synthesis method 274-277

Dokumacı Alkan E., Arı N., Alkan M.

54th International October Conference on Mining, Belgrade, Sırbistan, 18 - 21 Ekim 2023, cilt.1, ss.274-277, (Tam Metin Bildiri)

An alternative cellulose based natural fiber as a reinforcement material for polymeric composites

SEKİ Y., DALMIŞ R., ATAGÜR M., KILINÇ A. Ç., KÖKTAŞ S.

ICCE-25, Roma, İtalya, 16 - 22 Temmuz 2017, (Özet Bildiri)

High-Entropy Alloy Deposit on an Aluminum Alloy

Alkan M., Arı G.

22nd International Metallurgy and Materials Congress, İstanbul, Türkiye, 19 - 21 Eylül 2024, ss.1, (Özet Bildiri)

Effect Of Silanization In Photosensitive Epoxy Resin Reinforced With TiO2 Nanoparticles

Özler B., Yıldırım S., Yıldız D. B., Şen Kaya B.

The ICASEM 4th International Applied Sciences, Engineering and Mathematics Congress, Tekirdağ, Türkiye, 20 - 23 Ekim 2022, ss.107, (Özet Bildiri)

Düşük basınç SDGP tekniği ile üretilen Cu esaslı MMK kaplamaların 7075 alüminyum alaşımı üzerindeki performanslarının araştırılması

Karahan B., Malayoğlu U., Tekin K. C.

International Aviation Technologies and Applications Conference, İzmir, Türkiye, 20 - 21 Ekim 2023, ss.94-99, (Tam Metin Bildiri)

Kompozit malzeme üretiminde kullanılan Hindistan Cevizi liflerinin sodyum perborat tetrahidrat ile modifikasyonu ve karakterizasyonu

SEKİ Y., KILINÇ A. Ç., DALMIŞ R., KÖKTAŞ S.

3.Uluslararası Lif ve Polimer Araştırmaları Sempozyumu, 8 - 09 Mart 2018, (Tam Metin Bildiri)

Production of AlCoCrCuXFeNi alloys via self-propagating high-temperature synthesis method

Alkan M., Dokumacı Alkan E., Uğurluer D., Karakanat A.

The 54th International October Conference on Mining and Metallurgy, Belgrade, Sırbistan, 18 - 21 Ekim 2023, cilt.1, ss.278-281, (Tam Metin Bildiri)

Sol-Gel Synthesis and Characterization of Barium Hexaferrite BaFe12O19 as A Radar Absorbing Material

Ertuş E. B., Yıldırım S., Çelik E.

International Porous and Powder Materials Symposium and Exhibition (PPM 2013), İzmir, Türkiye, 3 - 06 Eylül 2013, (Özet Bildiri)

Structural and luminescence properties of YTaO4 and Y Ta Nb O4 scintillator nanoparticles produced via flame spray pyrolysis

Yıldırım S., Karsu E. C., Arıcan Alıcıkuş L. Z., Çelik E.

10th International Conference on Luminescence and ESR Dosimetry, Adana, Türkiye, 5 - 07 Eylül 2016, (Özet Bildiri)

EFFECTS OF FUNCTIONAL ADDITIVES ON THE SHS OF BORON CARBIDE

Yücel O., Ozer H., ALKAN M., TURAN A.

6th International Symposium on High-Temperature Metallurgical Processing held during 144th Annual Meeting and Exhibition of the Minerals-Metals-and-Materials-Society (TMS), Florida, Amerika Birleşik Devletleri, 15 - 19 Mart 2015, ss.61-66, (Tam Metin Bildiri)

Production of Dy2O3: Eu3 nanoparticles by sol-gel method and investigation of luminescence properties

ARİTMAN İ., EBEOĞLUGİL M. F.

3rd International Eurasian Conference on Biological and Chemical Sciences, Ankara, Türkiye, 19 - 20 Mart 2020, (Özet Bildiri)

Selective Precipitation of Th and Rare-Earth Elements from HCl Leach Liquor

Gunes H., Obuz H. E., ALKAN M.

Symposium on Rare Metal Extraction and Processing / TMS Annual Meeting, San-Antonio, Kuzey Mariana Adaları, 10 - 14 Mart 2019, ss.81-86, (Tam Metin Bildiri)

Gaz Sensörleri İçin Sol Jel Yöntemiyle ZnO CuO Al2O3 Yarıiletken Filmlerin İnce Filmlerin Üretimi ve Karakterizasyonu

Shrestha S., Borrero del Pino C., MALAYOĞLU U.

6.Uluslararası Katılımlı Seramik Kongresi, 15 - 18 Ekim 2006, (Tam Metin Bildiri)

Dijital x-ray görüntüleme sistemlerinde kullanılan GOS sintilatör malzemelerin sol-jel metoduyla sentezi ve mikroyapı karakterizasyonu

Aritman İ., Yıldırım S., Ebeoğlugil M. F., Ertekin K., Çelik E.

IX. Uluslararası Katılımlı Seramik Kongresi, Kütahya, Türkiye, 26 - 28 Kasım 2015, (Özet Bildiri)

Utilization Of Waste Toner Powders in The Production of Flexible Polymeric Magnetic Material

ÇELİK F., günay k., tosun b., EBEOĞLUGİL M. F.

IV. Uluslararası Polimerik Kompozitler Sempozyumu, Sergi Ve Proje Pazarı, İzmir, Türkiye, 7 - 09 Mayıs 2015, ss.267, (Özet Bildiri)

Zinc/Carbon Fiber Structures as Lead Acid Battery Mass Additives

turhan a., EROL M.

3rd International Students Science Congress, İzmir, Türkiye, 3 - 04 Mayıs 2019, (Özet Bildiri)

Effect of Substrate Surface Roughness on ZnO Nanostructured Photocatalysts

YAVAŞ A., GÜLER S., EROL M.

3rd International Students Science Congress, İzmir, Türkiye, 3 - 04 Mayıs 2019, (Özet Bildiri)

Whıte Inorganıc Plasma Electrolytıc Oxıdatıon Coatıng For Spacecrafts

13th International Symposium on Materials in the Space Environment, 22 - 26 Haziran 2015, (Tam Metin Bildiri)

Electrical Heating System Performance Evaluation of A noval heating system in a public transport vehicle

KIRMACI V., EROL M., EREN H., YAVAŞ A.

International Conference on Heat Transfer and Fluid Flow (ISER-INTERNATIONAL SOCIETY FOR ENGINEERS AND RESEARCHERS), PRAGUE, Çek Cumhuriyeti, 21 - 22 Eylül 2018, ss.1-3, (Tam Metin Bildiri)

Production of Nanostructured Zinc Oxide Films on ITO/Glass Substrates through Hydrothermal Method

TUNÇ I., YALÇIN E., EROL M., AYKAÇ A., CAN M.

2nd International Students Science Congress, İzmir, Türkiye, 4 - 05 Mayıs 2018, (Tam Metin Bildiri)

Synthesis of YIG Magneto Optic Thin Films by Sol Gel Technique