Prof. Dr. YOLDAŞ SEKİ

PAMUKKALE UNIVERSITY JOURNAL OF ENGINEERING SCIENCES-PAMUKKALE UNIVERSITESI MUHENDISLIK BILIMLERI DERGISI , cilt.23, sa.8, ss.949-953, 2017 (ESCI, TRDizin)

39. Manufacturing and mechanical, thermal and electrical characterization of graphene loaded chitosan composites

YENİER Z., SEKİ Y., Sen I., SEVER K., Mermer O., SARIKANAT M.

COMPOSITES PART B-ENGINEERING , cilt.98, ss.281-287, 2016 (SCI-Expanded, Scopus)

40. Electromechanical performance of chitosan-based composite electroactive actuators

Altinkaya E., SEKİ Y., Yilmaz O. C., ÇETİN L., ÖZDEMİR O., Sen I., et al.

COMPOSITES SCIENCE AND TECHNOLOGY , cilt.129, ss.108-115, 2016 (SCI-Expanded, Scopus)

41. Evaluation of linden fibre as a potential reinforcement material for polymer composites

SEKİ Y., SEKİ Y., SARIKANAT M., SEVER K., Durmuskahya C., BOZACI E.

JOURNAL OF INDUSTRIAL TEXTILES , cilt.45, sa.6, ss.1221-1238, 2016 (SCI-Expanded, Scopus)

42. The effect of argon and air plasma treatment of flax fiber on mechanical properties of reinforced polyester composite

SARIKANAT M., SEKİ Y., SEVER K., BOZACI E., DEMİR A., ÖZDOĞAN E.

JOURNAL OF INDUSTRIAL TEXTILES , cilt.45, sa.6, ss.1252-1267, 2016 (SCI-Expanded, Scopus)

43. Manufacturing and characterization of vine stem reinforced high density polyethylene composites

Kilinc A. Ç., Atagur M., Ozdemir O., Sen I., Kucukdogan N., Sever K., et al.

COMPOSITES PART B-ENGINEERING , cilt.91, ss.267-274, 2016 (SCI-Expanded, Scopus)

44. The investigation of antistatic effects of 1-ethyl-2,3-dimethylimidazolium ethyl sulphate for acrylic-based polymer film

SEKİ Y., Yildiz N., Ince M., Sengul S., Sever K., Sarikanat M., et al.

PLASTICS RUBBER AND COMPOSITES , cilt.45, sa.8, ss.362-367, 2016 (SCI-Expanded, Scopus)

45. Application of carboxymethylcellulose hydrogel based silver nanocomposites on cotton fabrics for antibacterial property

BOZACI E., Akar E., ÖZDOĞAN E., DEMİR A., ALTINIŞIK TAĞAÇ A., SEKİ Y.

CARBOHYDRATE POLYMERS , cilt.134, ss.128-135, 2015 (SCI-Expanded, Scopus)

46. Improvement of the electromechanical performance of carboxymethylcellulose-based actuators by graphene nanoplatelet loading

ÖZDEMİR O., KARAKUZU R., SARIKANAT M., SEKİ Y., Akar E., ÇETİN L., et al.

CELLULOSE , cilt.22, sa.5, ss.3251-3260, 2015 (SCI-Expanded, Scopus)

47. Graphite nanoplates loading into eutectic mixture of Adipic acid and Sebacic acid as phase change material

SEKİ Y., Ince S., EZAN M. A., TURGUT A., EREK A.

SOLAR ENERGY MATERIALS AND SOLAR CELLS , cilt.140, ss.457-463, 2015 (SCI-Expanded, Scopus)

48. Effects of PEG loading on electromechanical behavior of cellulose-based electroactive composite

ÖZDEMİR O., KARAKUZU R., SARIKANAT M., Akar E., SEKİ Y., Cetin L., et al.

Cellulose , cilt.22, sa.3, ss.1873-1881, 2015 (SCI-Expanded, Scopus)

49. Thermal properties of myristic acid/graphite nanoplates composite phase change materials

Ince S., SEKİ Y., EZAN M. A., TURGUT A., EREK A.

RENEWABLE ENERGY , cilt.75, ss.243-248, 2015 (SCI-Expanded, Scopus)

50. Electroactive behavior of graphene nanoplatelets loaded cellulose composite actuators

Sen I., SEKİ Y., SARIKANAT M., ÇETİN L., GÜRSES B. O., ÖZDEMİR O., et al.

COMPOSITES PART B-ENGINEERING , cilt.69, ss.369-377, 2015 (SCI-Expanded, Scopus)

51. Evaluating of Agave Americana Fibers for Biosorption of Dye from Aqueous Solution

ALTINIŞIK TAĞAÇ A., SEKİ Y., Ertas S., Akar E., BOZACI E., SEKİ Y.

FIBERS AND POLYMERS , cilt.16, sa.2, ss.370-377, 2015 (SCI-Expanded, Scopus)

52. Development and evaluation of graphite nanoplate (GNP)-based phase change material for energy storage applications

SEKİ Y., Ince S., EZAN M. A., TURGUT A., EREK A.

International Journal of Energy Research , cilt.39, sa.5, ss.696-708, 2015 (SCI-Expanded, Scopus)

53. Investigation of the effects of PWM parameters on ionic polymer metal composite actuators

Yilmaz O. C., Cetin L., GÜRSES B. O., Sen I., ÖZDEMİR O., SARIKANAT M., et al.

SMART MATERIALS AND STRUCTURES , cilt.23, sa.9, 2014 (SCI-Expanded, Scopus)

54. Preparation and Properties of Rice Husk-Filled Plasticized Wheat Gluten Biocomposites

Emadi S., SEKİ Y., SEVER K., SARIKANAT M.

POLYMER ENGINEERING AND SCIENCE , cilt.54, sa.7, ss.1477-1483, 2014 (SCI-Expanded, Scopus)

55. Carboxymethylcellulose (CMC)-hydroxyethylcellulose (HEC) based hydrogels: synthesis and characterization

SEKİ Y., ALTINIŞIK TAĞAÇ A., Demircioglu B., Tetik C.

CELLULOSE , cilt.21, sa.3, ss.1689-1698, 2014 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

56. Determination of properties of Althaea officinalis L. (Marshmallow) fibres as a potential plant fibre in polymeric composite materials

SARIKANAT M., SEKİ Y., SEVER K., Durmuskahya C.

COMPOSITES PART B-ENGINEERING , cilt.57, ss.180-186, 2014 (SCI-Expanded, Scopus)

57. Development of antimicrobial cotton fabric using bionanocomposites

ALTINIŞIK TAĞAÇ A., BOZACI E., Akar E., SEKİ Y., YURDAKOÇ M. K., DEMİR A., et al.

CELLULOSE , cilt.20, sa.6, ss.3111-3121, 2013 (SCI-Expanded, Scopus)

58. Electrical and mechanical properties of expanded graphite/high density polyethylene nanocomposites

SEVER K., Tavman I. H., SEKİ Y., TURGUT A., Omastova M., ÖZDEMİR İ.

COMPOSITES PART B-ENGINEERING , cilt.53, ss.226-233, 2013 (SCI-Expanded, Scopus)

59. Using of activated carbon produced from spent tea leaves for the removal of malachite green from aqueous solution

Akar E., ALTINIŞIK TAĞAÇ A., SEKİ Y.

ECOLOGICAL ENGINEERING , cilt.52, ss.19-27, 2013 (SCI-Expanded, Scopus)

60. Effect of huntite mineral on mechanical, thermal and morphological properties of polyester matrix

SEKİ Y., SEVER K., SARIKANAT M., Sakarya A., Elik E.

COMPOSITES PART B-ENGINEERING , cilt.45, sa.1, ss.1534-1540, 2013 (SCI-Expanded, Scopus)

61. Effects of the atmospheric plasma treatments on surface and mechanical properties of flax fiber and adhesion between fiber-matrix for composite materials

BOZACI E., SEVER K., SARIKANAT M., SEKİ Y., DEMİR A., ÖZDOĞAN E., et al.

COMPOSITES PART B-ENGINEERING , cilt.45, sa.1, ss.565-572, 2013 (SCI-Expanded, Scopus)

62. Extraction and properties of Ferula communis (chakshir) fibers as novel reinforcement for composites materials

SEKİ Y., Sarikanat M., SEVER K., Durmuskahya C.

COMPOSITES PART B-ENGINEERING , cilt.44, sa.1, ss.517-523, 2013 (SCI-Expanded)

63. Preparation of pH- and ionic-strength responsive biodegradable fumaric acid crosslinked carboxymethyl cellulose

Akar E., ALTINIŞIK TAĞAÇ A., SEKİ Y.

CARBOHYDRATE POLYMERS , cilt.90, sa.4, ss.1634-1641, 2012 (SCI-Expanded, Scopus)

64. Effect of siloxane treatment of jute fabric on the mechanical and thermal properties of jute/HDPE

SEKİ Y., SARIKANAT M., EZAN M. A.

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES , cilt.31, sa.15, ss.1009-1016, 2012 (SCI-Expanded, Scopus)

65. Variations of mechanical properties of jute/polyester composite aged in various media

Sen I., Aral A., SEKİ Y., SARIKANAT M., Sever K.

JOURNAL OF COMPOSITE MATERIALS , cilt.46, sa.18, ss.2219-2225, 2012 (SCI-Expanded, Scopus)

66. Effects of conductive graphite filler loading on physical properties of high-density polyethylene composite

Tavman I., Krupa I., Omastova M., Sarikanat M., Novak I., Sever K., et al.

POLYMER COMPOSITES , cilt.33, sa.7, ss.1071-1076, 2012 (SCI-Expanded, Scopus)

67. Mechanical Anisotropy in Unidirectional Glass Fabric Reinforced Oligomeric Siloxane Modified Polyester Composites

SARIKANAT M., SEVER K., SEKİ Y., Tavman I. H.

FIBERS AND POLYMERS , cilt.13, sa.6, ss.775-781, 2012 (SCI-Expanded, Scopus)

68. Characterization of Luffa cylindrica Fibers and the Effect of Water Aging on the Mechanical Properties of Its Composite with Polyester

Seki Y., Sever K., Erden S., Sarıkanat M., Neşer G., Özes Ç.

JOURNAL OF APPLIED POLYMER SCIENCE , cilt.123, sa.4, ss.2330-2337, 2012 (SCI-Expanded, Scopus)

69. Surface treatments of jute fabric: The influence of surface characteristics on jute fabrics and mechanical properties of jute/polyester composites

Sever K., SARIKANAT M., SEKİ Y., ERKAN G., ERDOĞAN Ü. H., ERDEN S.

INDUSTRIAL CROPS AND PRODUCTS , cilt.35, sa.1, ss.22-30, 2012 (SCI-Expanded, Scopus)

70. Synthesis of Chitosan Beads as Boron Sorbents

ANT BURSALI E., SEKİ Y., SEYHAN BOZKURT S., Delener M., YURDAKOÇ M.

JOURNAL OF APPLIED POLYMER SCIENCE , cilt.122, sa.1, ss.657-665, 2011 (SCI-Expanded, Scopus)

71. Oxygen plasma treatments of jute fibers in improving the mechanical properties of jute/HDPE composites

Sever K., ERDEN S., Gulec H. A., SEKİ Y., Sarikanat M.

MATERIALS CHEMISTRY AND PHYSICS , cilt.129, ss.275-280, 2011 (SCI-Expanded, Scopus)

72. Preparation and mechanical properties of graphite filled HDPE nanocomposites

SARIKANAT M., Sever K., Erbay E., Güner F., Tavman I., TURGUT A., et al.

Archives of Materials Science and Engineering , cilt.50, sa.2, ss.120-124, 2011 (Scopus)

73. Effect of the Atmospheric Plasma Treatment Parameters on Jute Fabric: The Effect on Mechanical Properties of Jute Fabric/Polyester Composites

DEMİR A., SEKİ Y., BOZACI E., SARIKANAT M., ERDEN S., Sever K., et al.

JOURNAL OF APPLIED POLYMER SCIENCE , cilt.121, sa.2, ss.634-638, 2011 (SCI-Expanded, Scopus)

74. Effect of the Low and Radio Frequency Oxygen Plasma Treatment of Jute Fiber on Mechanical Properties of Jute Fiber/Polyester Composite

SEKİ Y., SARIKANAT M., Sever K., ERDEN S., Gulec H. A.

FIBERS AND POLYMERS , cilt.11, sa.8, ss.1159-1164, 2010 (SCI-Expanded, Scopus)

75. Enhancement of the Mechanical Properties of Glass/polyester Composites via Matrix Modification Glass/polyester Composite Siloxane Matrix Modification

ERDEN S., Sever K., SEKİ Y., Sarikanat M.

FIBERS AND POLYMERS , cilt.11, sa.5, ss.732-737, 2010 (SCI-Expanded)

76. A natural sorbent, Luffa cylindrica for the removal of a model basic dye

ALTINIŞIK TAĞAÇ A., Guer E., SEKİ Y.

JOURNAL OF HAZARDOUS MATERIALS , cilt.179, ss.658-664, 2010 (SCI-Expanded, Scopus)

77. Improvement of Interfacial Adhesion of Glass Fiber/Epoxy Composite by Using Plasma Polymerized Glass Fibers

Sever K., SARIKANAT M., SEKİ Y., Gulec H. A., Mutlu M., Tavman I. H.

JOURNAL OF ADHESION , cilt.86, sa.9, ss.913-936, 2010 (SCI-Expanded, Scopus)

78. Preparation and characterization of poly(acrylic acid)/pillared clay superabsorbent composite

Molu Z. B., SEKİ Y., YURDAKOÇ M. K.

POLYMER BULLETIN , cilt.64, sa.2, ss.171-183, 2010 (SCI-Expanded, Scopus)

79. Effect of the Atmospheric Plasma Treatment Parameters on Surface and Mechanical Properties of Jute Fabric

BOZACI E., Sever K., DEMİR A., SEKİ Y., SARIKANAT M., ÖZDOĞAN E.

FIBERS AND POLYMERS , cilt.10, sa.6, ss.781-786, 2009 (SCI-Expanded, Scopus)

80. Concentration Effect of gamma-Glycidoxypropyl-trimethoxysilane on the Mechanical Properties of Glass Fiber-Epoxy Composites

Sever K., SARIKANAT M., SEKİ Y., Tavman I. H.

POLYMER COMPOSITES , cilt.30, sa.9, ss.1251-1257, 2009 (SCI-Expanded, Scopus)

81. Preparation and Characterization of Chitosan/KSF Biocomposite Film

ALTINIŞIK TAĞAÇ A., SEKİ Y., YURDAKOÇ M. K.

POLYMER COMPOSITES , cilt.30, sa.8, ss.1035-1042, 2009 (SCI-Expanded, Scopus)

82. Sorption of boron by invasive marine seaweed: Caulerpa racemosa var. cylindracea

ANT BURSALI E., ÇAVAŞ L., SEKİ Y., SEYHAN BOZKURT S., YURDAKOÇ M.

CHEMICAL ENGINEERING JOURNAL , cilt.150, ss.385-390, 2009 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

83. Preparation and characterization of thin films by plasma polymerization of glycidoxypropyltrimethoxysilane at different plasma powers and exposure times

Sever K., SEKİ Y., Gulec H. A., Sarikanat M., Mutlu M., Tavman I.

APPLIED SURFACE SCIENCE , cilt.255, sa.20, ss.8450-8457, 2009 (SCI-Expanded, Scopus)

84. The Structure of gamma-Glycidoxypropyltrimethoxysilane on Glass Fiber Surfaces: Characterization by FTIR, SEM, and Contact Angle Measurements

Sever K., SEKİ Y., Tavman I. H., Erkan G., Cecen V.

POLYMER COMPOSITES , cilt.30, sa.5, ss.550-558, 2009 (SCI-Expanded, Scopus)

85. Innovative multifunctional siloxane treatment of jute fiber surface and its effect on the mechanical properties of jute/thermoset composites

SEKİ Y.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING , cilt.508, ss.247-252, 2009 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

86. Equilibrium, kinetics and thermodynamic aspects of Promethazine hydrochloride sorption by iron rich smectite

SEKİ Y., YURDAKOÇ M. K.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS , cilt.340, ss.143-148, 2009 (SCI-Expanded, Scopus)

87. Removal of malachite green by using an invasive marine alga Caulerpa racemosa var. cylindracea

Bekci Z., SEKİ Y., ÇAVAŞ L.

JOURNAL OF HAZARDOUS MATERIALS , cilt.161, ss.1454-1460, 2009 (SCI-Expanded, Scopus)

88. Effects of fiber surface treatments on mechanical properties of epoxy composites reinforced with glass fabric

Sever K., SARIKANAT M., SEKİ Y., Cecen V., Tavman I. H.

JOURNAL OF MATERIALS SCIENCE , cilt.43, sa.13, ss.4666-4672, 2008 (SCI-Expanded)

89. Synthesis of pH dependent chitosan-EPI hydrogel films and their application for in vitro release of promethazine hydrochloride

SEKİ Y., YURDAKOÇ M. K.

JOURNAL OF APPLIED POLYMER SCIENCE , cilt.109, sa.1, ss.683-690, 2008 (SCI-Expanded)

90. Sorption of malachite green on chitosan bead

Bekci Z., Oezveri C., SEKİ Y., YURDAKOÇ M. K.

JOURNAL OF HAZARDOUS MATERIALS , cilt.154, ss.254-261, 2008 (SCI-Expanded)

91. FTIR and SEM analysis of polyester- and epoxy-based composites manufactured by VARTM process

Cecen V., SEKİ Y., SARIKANAT M., Tavman I. H.

JOURNAL OF APPLIED POLYMER SCIENCE , cilt.108, sa.4, ss.2163-2170, 2008 (SCI-Expanded, Scopus)

92. Polyester composites reinforced with noncrimp stitched glass fabrics: Experimental characterization of composites and investigation on the interaction between glass fiber and polyester matrix

Cecen V., SARIKANAT M., SEKİ Y., YILDIZ H., Tavman I. H.

POLYMER COMPOSITES , cilt.29, sa.3, ss.262-273, 2008 (SCI-Expanded, Scopus)

93. Application of iron-rich natural clays in Camlica, Turkey for boron sorption from water and its determination by fluorimetric-azomethine-H method

Seyhan S., SEKİ Y., YURDAKOÇ M., MERDİVAN M.

JOURNAL OF HAZARDOUS MATERIALS , cilt.146, ss.180-185, 2007 (SCI-Expanded, Scopus)

94. Identification and characterization of Fe-rich smectites in the Camlica Region of western Turkey

SEKİ Y., YURDAKOÇ M. K.

CLAY MINERALS , cilt.42, sa.2, ss.153-160, 2007 (SCI-Expanded)

95. Preparation and characterization of poly(acrylic acid)-iron rich smectite superabsorbent composites

SEKİ Y., Torgursul A., YURDAKOÇ M. K.

POLYMERS FOR ADVANCED TECHNOLOGIES , cilt.18, sa.6, ss.477-482, 2007 (SCI-Expanded)

96. A study of equilibrium and FTIR, SEM/EDS analysis of trimethoprim adsorption onto K10

Bekci Z., SEKİ Y., Yurdakoc M. K.

JOURNAL OF MOLECULAR STRUCTURE , cilt.827, sa.1-3, ss.67-74, 2007 (SCI-Expanded, Scopus)

97. Polyester composites reinforced with noncrimp stitched carbon fabrics: Mechanical characterization of composites and investigation on the interaction between polyester and carbon fiber

Cecen V., Sarikanat M., SEKİ Y., Govsa T., Yildiz H., Tavman I. H.

JOURNAL OF APPLIED POLYMER SCIENCE , cilt.102, sa.5, ss.4554-4564, 2006 (SCI-Expanded, Scopus)

98. Removal of boron from aqueous solution by adsorption on Al2O3 based materials using full factorial design

SEKİ Y., Seyhan S., YURDAKOÇ M.

JOURNAL OF HAZARDOUS MATERIALS , cilt.138, sa.1, ss.60-66, 2006 (SCI-Expanded, Scopus)

99. Equilibrium and kinetics for the sorption of promethazine hydrochloride onto K10 montmorillonite

Gereli G., SEKİ Y., Kusoglu I. M., YURDAKOÇ M. K.

JOURNAL OF COLLOID AND INTERFACE SCIENCE , cilt.299, sa.1, ss.155-162, 2006 (SCI-Expanded)

100. Equilibrium studies for trimethoprim adsorption on montmorillonite KSF

Bekci Z., SEKİ Y., YURDAKOÇ M.

JOURNAL OF HAZARDOUS MATERIALS , cilt.133, ss.233-242, 2006 (SCI-Expanded)

101. Removal of boron from aqueous solution by clays and modified clays

Karahan S., YURDAKOÇ M., SEKİ Y., YURDAKOÇ M. K.

JOURNAL OF COLLOID AND INTERFACE SCIENCE , cilt.293, sa.1, ss.36-42, 2006 (SCI-Expanded)

102. Adsorption of Promethazine hydrochloride with KSF Montmorillonite

SEKİ Y., YURDAKOÇ M. K.

ADSORPTION-JOURNAL OF THE INTERNATIONAL ADSORPTION SOCIETY , cilt.12, sa.1, ss.89-100, 2006 (SCI-Expanded)

103. Paraquat adsorption onto clays and organoclays from aqueous solution

SEKİ Y., YURDAKOÇ M. K.

JOURNAL OF COLLOID AND INTERFACE SCIENCE , cilt.287, sa.1, ss.1-5, 2005 (SCI-Expanded, Scopus)

104. Kinetic and thermodynamic studies of boron removal by Siral 5, Siral 40, and Siral 80

YURDAKOÇ M., SEKİ Y., Karahan S., YURDAKOÇ M. K.

JOURNAL OF COLLOID AND INTERFACE SCIENCE , cilt.286, sa.2, ss.440-446, 2005 (SCI-Expanded, Scopus)

105. LASER SURFACE HARDENING AND THE MICROSTRUCTURE OF MARTENSITIC STAINLESS-STEELS

SEKİ Y.

TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN , cilt.72, sa.5, 1986 (SCI-Expanded, Scopus)

106. SURFACE HARDENING OF PURE IRON BY CO LASER

SEKİ Y., ASHIDA Y.

TRANSACTIONS OF THE IRON AND STEEL INSTITUTE OF JAPAN , cilt.24, sa.5, 1984 (SCI-Expanded)

107. TEMPER-HARDENING AND THE MICROSTRUCTURE OF RAPID SOLIDIFICATION LAYER FORMED BY LASER

SEKİ Y., ASIDA Y., TSUJI K.

TRANSACTIONS OF THE IRON AND STEEL INSTITUTE OF JAPAN , cilt.23, sa.5, 1983 (SCI-Expanded)

108. DEVELOPMENT OF PULVERIZED COAL INJECTION INTO THE BLAST-FURNACE .2. INFLUENCE OF PULVERIZED COAL INJECTION ON RACEWAY PHENOMENA IN THE BLAST-FURNACE

KANAYAMA H., SEKİ Y., SAITO T., MAEKAWA M., NARITA K., TAMURA S.

TRANSACTIONS OF THE IRON AND STEEL INSTITUTE OF JAPAN , cilt.23, sa.5, 1983 (SCI-Expanded) Sürdürülebilir Kalkınma

109. EFFECT OF AUSTENITE GRAIN-SIZE AND TEMPERING TEMPERATURE ON THE LOW-CYCLE FATIGUE PROPERTIES AT ELEVATED-TEMPERATURE OF HOT WORK TOOL STEEL, SKD62

HOZEN M., SEKİ Y., ASHIDA Y., TSUJI K.

TRANSACTIONS OF THE IRON AND STEEL INSTITUTE OF JAPAN , cilt.23, sa.5, 1983 (SCI-Expanded)

110. INFLUENCE OF CHLORIDE ON LOW-TEMPERATURE REDUCTION BEHAVIOR OF SINTER

KANAYAMA H., SEKİ Y., SAITO T., MAEKAWA M., NARITA K.

TRANSACTIONS OF THE IRON AND STEEL INSTITUTE OF JAPAN , cilt.22, sa.4, 1982 (SCI-Expanded)

111. EFFECTS OF TEST TEMPERATURE OF FATIGUE DAMAGE PROCESS OF AUSTENITIC STEELS

NISHIWAKI K., FUJITA T., SEKİ Y.

TRANSACTIONS OF THE IRON AND STEEL INSTITUTE OF JAPAN , cilt.20, sa.2, ss.80-86, 1980 (SCI-Expanded)

112. FATIGUE BEHAVIOR OF METASTABLE AND STABLE AUSTENITIC STEELS

HORIBE S., SEKİ Y., FUJITA T., ARAKI T.

TRANSACTIONS OF THE IRON AND STEEL INSTITUTE OF JAPAN , cilt.20, sa.6, ss.398-405, 1980 (SCI-Expanded)

Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 64

1. The effect of zinc borate on the propertıes of flame retarded acrylonitrilebutadıene styrene (ABS)

Yıldız C., Seki Y., Kızılkan E., Sarıkanat M., Altay L.

Second International Bilateral Workshop on Science Between DEU Azarbaijan National Academy of Sciences, İzmir, Türkiye, 18 Kasım 2022, ss.20, (Özet Bildiri)

2. Comparison of PVA, CMC and PEG Gel Matrıces with Gelatin in Polymer Gel Dosimeter

Alkan T., Yurt A., Seki Y.

TURKISH PHYSICAL SOCIETY 38TH INTERNATIONAL PHYSICS CONGRESS, Muğla, Türkiye, 31 Ağustos - 04 Eylül 2022, ss.265, (Özet Bildiri)

3. DEVELOPMENT OF HALOGEN-FREE FLAME RETARDANT ACRYLONITRILE BUTADIENE STYRENE (ABS) BASED COMPOSITE MATERIALS

Yıldız C., Seki Y., Kızılkan E., Sarıkanat M., Altay L.

AEGEAN SUMMIT 4th INTERNATIONAL APPLIED SCIENCES CONGRESS, Muğla, Türkiye, 12 Şubat 2022, ss.19-21, (Özet Bildiri)

4. Microencapsulation of Isophorone Diisocyanate with Silica Shell

Beglarıgale A., Eyice D., Seki Y., Yazıcı H.

3rd RILEM Spring Convention 2020, Braga, Portekiz, 10 Mart - 14 Mayıs 2020, (Tam Metin Bildiri)

5. Thermal Conductivity and Mechanical Properties of Synthetic Graphite Loaded Polyphenylene Sulfide Composites

Tantug G. S., SEKİ Y., SARIKANAT M., ALTAY L., Gulen S., Isbilir A.

35th International Conference of the Polymer-Processing-Society (PPS), Türkiye, 26 - 30 Mayıs 2019, cilt.2205, (Tam Metin Bildiri)

6. Determination of Thermal Conductivity of Carbon Filled Polymeric Composite Plates for Compact Plate Heat Exchangers

GÜVEN A., AKDEMİR Ö., ÇOBAN M. T., ATAGÜR M., SEKİ Y., SEVER K., et al.

6th Int. Conf.: Thermophysical and Mechanical Properties of Advanced Materials (THERMAM) 8thRostocker Int. Conf.: Thermophysical Properties for Technical Thermodynamics, 22 Eylül 2019, (Özet Bildiri)

7. Blending of Poly (Phenylene Sulfide) with Syndiotactic Polystyrene

SEKİ Y., Sevig Tantug G., Oner F., SARIKANAT M., ALTAY L.

Recent Advances in Mathematical and Engineering Sciences International Mathematical and Engineering Conference, 24 Temmuz 2019, (Özet Bildiri)

8. Sodyum Silikat/ Poliüretan Mikrokapsül İçeren Çimento Esaslı Kompozitlerin Kendi Kendine İyileşme Etkinliği

EYİCE D., BEGLARIGALE A., SEKİ Y., YAZICI H.

10. Uluslararası Beton Kongresi, Bursa, Türkiye, 2 - 04 Mayıs 2019, (Tam Metin Bildiri)

9. Effect Of Phase Change Materials On Thermal And Mechanical Properties Of Polypropylene

ALTAY L., SEKİ Y., ÖZKAYA M., SEVİĞ TANTUĞ G., İSBİLİR A., SARIKANAT M.

Thermophysical and Mechanical Properties of Advanced Materials THERMAM 2018, Rosctock, Almanya, 12 - 16 Ekim 2018, (Özet Bildiri)

10. The Effect of Various Mineral Fillers on Rheological and Mechanical Properties of Polypropylene

SARIKANAT M., ALTAY L., UYSALMAN T., AKDENİZ A., HÜNDÜR E. Y., ÖZKAYA M., et al.

5th INTERNATIONAL CONFERENCE ON COMPUTATIONAL AND EXPERIMENTAL SCIENCE AND ENGINEERING (ICCESEN-2018), Antalya, Türkiye, 12 - 16 Ekim 2018, (Özet Bildiri)

11. Optimization of Morphology of Sodium Silicate/Polyurethane Microcapsules Used for Self-Healing in Cementitious Materials

BEGLARIGALE A., EYİCE D., SEKİ Y., YAZICI H.

13th International Congress on Advances in Civil Engineering, Çeşme/İzmir, Türkiye, 12 - 14 Eylül 2018, (Tam Metin Bildiri)

12. INVESTIGATION ON MECHANICAL, VISCOELASTIC, AND THERMAL PROPERTIES OF TERNARY CARBON (CARBONFIBER/GRAPHITE/ MULTIWALLED CARBON NANOTUBES) FILLED POLYPROPYLENE COMPOSITES

ATAGÜR M., SEVER K., ALTAY L., SEKİ Y., SEYDİBEYOĞLU M. Ö., SARIKANAT M.

IV. International Ege Composite Materials Symposium KOMPEGE 2018, İzmir, Türkiye, 6 - 08 Eylül 2018, ss.39, (Özet Bildiri)

13. EFFECT OF SYNTHETIC GRAPHITE AS A THERMALCONDUCTIVE FILLER ON THERMAL AND MECHANICAL PROPERTIES OF POLYAMIDE 4.6 BASED COMPOSITE MATERIALS

GÜLEN S., ALTAY L., SEKİ Y., SARIKANAT M., SEVİĞ TANTUĞ G., SEVER K.

IV. International Ege Composite Materials Symposium KOMPEGE 2018, İzmir, Türkiye, 6 - 08 Eylül 2018, ss.27, (Özet Bildiri)

14. ENHANCED THERMAL AND ELECTRICAL CONDUCTIVITY OF EPOXY COMPOSITES FILLED WITH SYNTHETIC GRAPHITE

KIRCALI M. C., ATALAN O., SARIKANAT M., ALTAY L., SEKİ Y.

IV. International Ege Composite Materials Symposium KOMPEGE 2018, İzmir, Türkiye, 6 - 08 Eylül 2018, ss.31, (Özet Bildiri)

15. EVALUATION OF SYNERGISTIC EFFECT OF BORAX DECAHYDRATE ON FLAME RETARDANCY OF POLYPROPYLENE

SEKİ Y., SARIKANAT M., ALTAY L., UYSALMAN T., SEVİĞ TANTUĞ G., İSBİLİR A.

3rd International Conference on Engineering Technology and Applied Sciences (ICETAS), Üsküp, Makedonya, 17 - 21 Temmuz 2018, ss.98, (Özet Bildiri)

16. INVESTIGATION OF THERMAL PROPERTIES OF SYNTHETIC AND NATURAL GRAPHITE FILLED POLYAMIDE COMPOSITES

ALTAY L., SEKİ Y., UYSALMAN T., SEVİĞ TANTUĞ G., İSBİLİR A., SARIKANAT M.

3rd International Conference on Engineering Technology and Applied Sciences (ICETAS), Üsküp, Makedonya, 17 - 21 Temmuz 2018, ss.170, (Özet Bildiri)

17. COMPARISON OF BARITE AND COLEMANITE LOADED POLYPROPYLENE COMPOSITES IN TERMS OF SOUND TRANSMISSION LOSS

SARIKANAT M., ALTAY L., ÖZKAYA M., SEÇGİN A., İSBİLİR A., SEKİ Y.

3rd International Conference on Engineering Technology and Applied Sciences (ICETAS), Üsküp, Makedonya, 17 - 21 Temmuz 2018, ss.184, (Özet Bildiri)

18. FACTORS AFFECTING THE MECHANICAL AND THERMAL PERFORMANCE OF NATURAL FIBER FILLED POLYPROPYLENE COMPOSITES FOR AUTOMOTIVE APPLICATIONS

UYSALMAN T., BOZACI E., ŞENALTUN M., ÇAPAN U., ÇÖL A., GİRGİNER B., et al.

9th International Automotive Technologies Congress, OTEKON 2018, Bursa, Türkiye, 7 - 08 Mayıs 2018, ss.817-824, (Tam Metin Bildiri)

19. Effect of Ulexite on Mechanical, Thermal Properties and Flame Retardancy of Polypropylene

ALTAY L., SEKİ Y., UYSALMAN T., SEVİĞ TANTUĞ G., İSBİLİR A., SARIKANAT M.

8th International Advances in Applied Physics and Materials Science Congress Exhibition APMAS2018, Muğla, Türkiye, 24 - 30 Nisan 2018, (Özet Bildiri)

20. Polyethylene Filled with Almond Shells Particles: Mechanical and Thermal Properties

GÜVEN A., ATAGÜR M., ALTAY L., SEKİ Y., UYSALMAN T., SEVİĞ TANTUĞ G., et al.

8th International Advances in Applied Physics and Materials Science Congress Exhibition APMAS 2018, Muğla, Türkiye, 24 - 30 Nisan 2018, (Özet Bildiri)

21. The Effect of Various Minerals on Sound Absorption and Other Properties of Polypropylene

SARIKANAT M., SEÇGİN A., UYSALMAN T., SEVİĞ TANTUĞ G., ÖZKAYA M., ATAGÜR M., et al.

8th International Advances in Applied Physics and Materials Science Congress Exhibition APMAS 2018, Muğla, Türkiye, 24 - 30 Nisan 2018, ss.146, (Özet Bildiri)

22. The Effect Of Atmospheric Plasma Treatments On Mechanical Properties of Recycled Carbon Fiber Reinforced Polypropyene

ALTAY L., BOZACI E., ATAGÜR M., SEVER K., SEKİ Y., SEVİĞ G., et al.

The Twenty-Fifth Annual InternationalConference on Composites/Nano Engineering, 16 - 22 Temmuz 2017

23. The Effect of Atmospheric Plasma Treatments on Mechanical Properties of Recycled Carbon Fiber Reinforced Polypropylene Composites

ALTAY L., BOZACI E., ATAGÜR M., SEVER K., SEKİ Y., SEVİĞ G., et al.

The 25th Annual International Conference on Composites/Nano Engineering (ICCE-25), Roma, İtalya, 16 - 22 Temmuz 2017, (Özet Bildiri)

24. The Effect of Hybrid Carbon Fillers on Thermal and Mechanical Properties of PP Based Composites

ATAGÜR M., AKYÜZ O., SEVER K., SEKİ Y., ALTAY L., SEYDİBEYOĞLU M. Ö., et al.

The 25th Annual International Conference on Composites/Nano Engineering (ICCE-25), Roma, İtalya, 16 - 22 Temmuz 2017, (Özet Bildiri)

25. Utilization of agricultural waste fillers in polypropylene based composites

SARIKANAT M., ALTAY L., ATAGÜR M., AKYÜZ O., SEKİ Y., AYCAN Y., et al.

The 25th Annual International Conference on Composites/Nano Engineering (ICCE-25), Roma, İtalya, 16 - 22 Temmuz 2017, (Özet Bildiri)

26. The Effect of Modified Graphene on Thermal Properties of Polypropylene

SEKİ Y., AVCI B., UZUN S., KAYA N., ATAGÜR M., SEVER K., et al.

The 25th annual international conference on composites/nanoengineering (ICCE-25), 16 - 22 Temmuz 2017, (Özet Bildiri)

27. Investigation of Mechanical and Thermal Properties of Pumice Powder Filled Polypropylene Composites

SEVER K., ATAGÜR M., TUNÇALP M., SEKİ Y., ALTAY L., SARIKANAT M.

The 25th Annual International Conference on Composites/Nano Engineering (ICCE-25), Roma, İtalya, 16 - 22 Temmuz 2017, (Özet Bildiri)

28. Thermal, Electrical and Mechanical Properties of Various Thermal ConductivePowder Filled Polyamide 6 Composite Materials for Thermal Management Applications

ALTAY L., ATAGÜR M., SEKİ Y., ŞEN İ., SARIKANAT M., SEVER K., et al.

7th International Advances in Applied Physics and Materials Science Congress Exhibition, 22 - 26 Nisan 2017, ss.86, (Özet Bildiri)

29. Thermal, Electrical and Mechanical Properties of various Thermal Conductive Powder Filled Polyamide Composite Materials for Thermal Management Applications

ALTAY L., ATAGÜR M., SEKİ Y., SEN İ., SARIKANAT M., SEVER K., et al.

7th International Advances in Applied Physics and MaterialsScience Congress Exhibition (APMAS 2017), 22 - 26 Nisan 2017, (Özet Bildiri)

30. Effect of Diatomite Weight Fraction on Morphology, Thermal and Physical Properties of Diatomite Filled High Density Polyethylene Composites

ATAGÜR M., SEVER K., ALTAY L., SEKİ Y., UYSALMAN T., SEN İ., et al.

7th International Advances in Applied Physics and Materials Science Congress Exhibition, 22 - 26 Nisan 2017, (Özet Bildiri)

31. Effect of Compatibilizer on Morphology, Thermal and Mechanical Properties of Recycled Carbon Fiber Reinforced Polypropylene Composites

ALTAY L., ATAGÜR M., SEKİ Y., SEN İ., SARIKANAT M., SEVER K.

7th International Advances in Applied Physics and Materials Science Congress Exhibition APMAS2017, 22 - 26 Nisan 2017, (Özet Bildiri)

32. Termal Yalıtkan-Elektriksel İletken Tekstil Esaslı Malzeme Geliştirilmesi

SEKİ Y., SEKİ Y.

9.Uluslararası AR-GE Poje Pazarı, 27 - 28 Nisan 2017, (Özet Bildiri)

33. Mechanical And Thermal Analysis of Different Ratios of Vermiculite PP Composites

Kaya N., ATAGÜR M., Akyüz O., SARIKANAT M., SEKİ Y., SEVER K.

16th International Materials Symposium IMSP'2016, 12 - 14 Ekim 2016

34. Thermal And Mechanical Characterization Of Thermally Conductive Carbon Based Polymer Composite Materials

ALTAY L., SARIKANAT M., SEKİ Y., AKDEMİR Ö., SEVER K., GÜRLEK G., et al.

6th International Conference on Materials Science and Technologies, 9 - 12 Kasım 2016

35. Investigation of Mechanical Properties of Diatomite Filled Polypropylene Composites

SEVER K., Akyüz O., Kaya N., SEKİ Y., SARIKANAT M.

6th International Conference on Materials Science and Technologies, Bükreş, Romanya, 9 - 12 Kasım 2016

36. Fabrication and Characterization of Carbon Fiber Reinforced Polypropylene Composite Materials

SARIKANAT M., ALTAY L., SEKİ Y., SEVER K., Sen İ., Uysalman T.

9th International Conference on Materials Science and Technologies, 9 - 12 Kasım 2016, (Özet Bildiri)

37. liquid incorporated acrylic polymer for better electrical conductivity properties

SEKİ Y., Yıldız N., İnce M., Ergül O., SEVER K., SARIKANAT M.

6th International Conference on Materials Science and Technologies, Bükreş, Romanya, 9 - 12 Kasım 2016

38. Ionic liquid incorporated acrylic polymer for better electrical conductivity properties

SEKİ Y., Yıldız N., İnce M., Ergül O., SEVER K., SARIKANAT M.

6th International Conference on Materials Science and Technologies, 09 Kasım 2016

39. Kağıt Üretim Atığı Katkılı Yüksek Yoğunluklu Polietilen YYPE Kompozitlerin Mekanik Özelliklerinin İncelenmesi INVESTIGATION OF MECHANICAL PROPERTIES OF PAPER PROCESSING RESIDUE FILLED HIGH DENSITY POLYETHYLENE HDPE COMPOSITES

Küçükdoğan N., Halis S., SÜTÇÜ M., SARIKANAT M., SEKİ Y., SEVER K.

16th International Materials Symposium IMSP'2016, Denizli, Türkiye, 12 - 14 Ekim 2016

40. Viscoelastic and Mechanical Properties of Olive Pomace Filled Polypropylene PP Composites

Kaya N., ATAGÜR M., Akyüz O., SEKİ Y., SARIKANAT M., SEYDİBEYOĞLU M. Ö., et al.

3rd International Conference On Thermophysical And Mechanical Properties Of Advanced Materials, 1 - 03 Eylül 2016

41. Effect of pDADMAC Concentration On Electromechanical Performance Of Chitosan Based Electroactive Actuators

ALTINKAYA E., SEKİ Y., GÜRSES B. O., Yılmaz Ö. C., ÇETİN L., ÖZDEMİR O., et al.

80th Prague Meeting on Macromolecules, 10 - 14 Temmuz 2016

42. GRAFEN YÜKLÜ SELÜLOZ TABANLI IYONİK POLİMER METALKOMPOZİTLERİN ELEKTROAKTİF ÖZELLİKLERİNİN İNCELENMESİ

AKAR E., SEKİ Y., SARIKANAT M., ÇETİN L., ÖZDEMİR O., Yılmaz Ö. C., et al.

27. Ulusal Kimya Kongresi, Çanakkale, Türkiye, 23 - 28 Ağustos 2015, ss.683, (Özet Bildiri)

43. An investigation on Viscoelastic and Electrical Properties of Biopolymer based composites

SEVER K., SEKİ Y., Yenier Z., Şen İ., SARIKANAT M.

ICCM: 2015 : International Conference on Composite Materials, 6 - 08 Ağustos 2015, (Özet Bildiri)

44. Electromechanical Behaviour of Chitosan Based Electroactive Polymer

SARIKANAT M., AKAR E., Şen İ., SEKİ Y., Yılmaz Ö. C., GÜRSES B. O., et al.

ICCM 2015: International Conforence on Composite Materials, 6 - 08 Ağustos 2015, (Özet Bildiri)

45. E valuation of Vine Stem Waste as a FillerMaterial for High Density Polyethylene

SEKİ Y., Kılınç A. Ç., ATAGÜR M., ÖZDEMİR O., Şen İ., SEVER K., et al.

ICCM 2015: International Conforence on Composite Materials, 6 - 08 Ağustos 2015, (Özet Bildiri)

46. FİLM KALINLIĞININ İYONİK SIVI İÇEREN POLİMERMETALKOMPOZİT AKTÜATÖRLERİN PERFORMANSINA ETKİSİNİN İNCELENMESİ

AKAR E., SEKİ Y., ÖZDEMİR O., Şen İ., SARIKANAT M., GÜRSES B. O., et al.

15th International Materials Symposium (IMSP’2014), Denizli, Türkiye, 15 - 17 Ekim 2014, ss.688-695, (Tam Metin Bildiri)

47. KARBOKSİMETİL SELÜLOZ TABANLI İYONİK POLİMER METAL KOMPOZİTLERDE PLASTİKLEŞTİRİCİNİN ELEKTROMEKANİK DAVRANIŞA ETKİLERİ

ÖZDEMİR O., KARAKUZU R., SARIKANAT M., AKAR E., SEKİ Y., Şen İ., et al.

15th International Materials Symposium (IMSP’2014), Denizli, Türkiye, 15 - 17 Ekim 2014, ss.680-687, (Tam Metin Bildiri)

61. Differential Scanning Calorimetry Investigation of Conductive Nanocomposites Based on EVA Copolymer and Expanded Graphite

TAVMAN İ. H., SEVER K., SEKİ Y., EZAN M. A., TURGUT A., ÖZDEMİR İ., et al.

6th Nanoscience and Nanotechnology Conference - NanoTR-VI, İzmir, Türkiye, 15 - 18 Haziran 2010, (Özet Bildiri)

Metrikler

Yayın

180

Yayın (WoS)

111

Yayın (Scopus)

105

Atıf (WoS)

4286

H-İndeks (WoS)

Atıf (Scopus)

4922

H-İndeks (Scopus)

Atıf (Scholar)

6875

H-İndeks (Scholar)

Atıf (Sobiad)

H-İndeks (Sobiad)

Proje

Tez Danışmanlığı

Açık Erişim

BM Sürdürülebilir Kalkınma Amaçları

Yayınlar & Eserler