Prof. Dr. ZEKİ KIRAL

Makaleler 46

1. The Mechanical and Modal Characteristics of an Aluminum-Tourmaline Metal Matrix Composite Material

Daş O., Öztürk H., Kıral Z., Gören Kıral B., Yücel Öztürk Y., Uyulgan B., et al.

SIGMA JOURNAL OF ENGINEERING AND NATURAL SCIENCES , cilt.45, sa.2, ss.1-15, 2027 (ESCI, Scopus) Sürdürülebilir Kalkınma

2. Vibration characteristics of a cracked multi-bay frame with moving oscillatory loads

Demirtaş S., Öztürk H., Kıral Z.

BRIDGE STRUCTURES , cilt.21, sa.4, ss.180-197, 2025 (ESCI, Scopus)

3. Improved Static and Dynamic Behavior of Auxetic Structures with Radial Limb Design

Sayın S., Kıral Z.

APPLIED SCIENCES , cilt.15, ss.1-21, 2025 (SCI-Expanded, Scopus)

4. Influence of aerogel powder on the mechanical and stability properties of photocurable resin composites produced by stereolithography (SLA)

Yavuz G. A., GÖREN KIRAL B., KIRAL Z.

MATERIALS TESTING , cilt.67, sa.3, ss.436-445, 2025 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

5. Numerical and Experimental Investigation of Aspect Ratio Effect on Aerodynamic Performance of NACA 4415 Airfoil Section at Low Reynolds Number Numerična in eksperimentalna raziskava vpliva vitkosti krila na aerodinamične lastnosti profila NACA 4415 pri nizkem Reynoldsovem številu

Ümütlü H. C. A., KIRAL Z., Karadeniz Z. H.

Strojniski Vestnik/Journal of Mechanical Engineering , cilt.71, sa.12, ss.51-57, 2025 (SCI-Expanded, Scopus)

6. Investigation on Parameters Influencing Natural Rubber Rebound Resilience Properties

Diambu A. N., Gören Kıral B., Kıral Z.

International Journal of Modern Engineering Research (IJMER) , cilt.14, sa.3, ss.31-44, 2024 (Hakemli Dergi)

7. Thermal Image and Inverter Data Analysis for Fault Detection and Diagnosis of PV Systems

Baltacı Ö., KIRAL Z., Dalkılınç K., Karaman O.

Applied Sciences (Switzerland) , cilt.14, sa.9, 2024 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

8. Investigation of the Effect of Adding Waste Eggshell Particles to a Resin Used for SLA Printing Applications

Yavuz G. A., GÖREN KIRAL B., GENÇER G. M., KIRAL Z.

MECHANICS OF COMPOSITE MATERIALS , cilt.60, sa.1, ss.103-116, 2024 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

9. Exploratory Study on the Properties of Compact Three-Roving Yarn: Comparison The Properties of Compact Spun, Compact Siro-Spun and Compact Three-Roving Yarns

Demir M., Kiliç M., Sayın S., Kıral Z., Balduk F., Denge K. K.

TEKSTIL VE KONFEKSIYON , cilt.34, sa.1, ss.19-31, 2024 (SCI-Expanded, Scopus)

10. Experimental investigation of NACA 4415 airfoil using vibration data for stall detection

AYAZ ÜMÜTLÜ H. C., KIRAL Z., Karadeniz Z. H.

Aircraft Engineering and Aerospace Technology , cilt.95, sa.10, ss.1551-1559, 2023 (SCI-Expanded, Scopus)

11. Theoretical, Numerical and Experimental Investigation of the Inlet and Exit Diameter Effect of Convergent-Conical Nozzles on Thrust Force and Volumetric Flow Rate

Hızarcı B., Kıral Z.

Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi , cilt.25, sa.75, ss.1-10, 2023 (TRDizin)

12. A preliminary study on the manufacturing aluminum–potassium feldspar metal matrix composite materials Eine vorläufige Studie zur Herstellung von Aluminium-Kalium-Feldspat-Metallmatrix-Verbundwerkstoffen

Das O., Aybarc U., Yücel Öztürk Y., Gören Kıral B., Öztürk H., Kıral Z., et al.

Materialwissenschaft und Werkstofftechnik , cilt.54, sa.1, ss.109-119, 2023 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

13. Low-velocity single and repeated impact behavior of 3D printed honeycomb cellular panels

Acar Yavuz G., Gören Kıral B., Hızarcı B., Kıral Z.

MATERIALPRUEFUNG/MATERIALS TESTING , cilt.64, sa.10, ss.1420-1436, 2022 (SCI-Expanded, Scopus)

14. Optimal extended state observer based control for vibration reduction on a flexible cantilever beam with using air thrust actuator

HIZARCI B., KIRAL Z., Şahin S.

Applied Acoustics , cilt.197, 2022 (SCI-Expanded, Scopus)

15. Experimental investigation of vibration attenuation on a cantilever beam using air-jet pulses with the particle swarm optimized quasi bang-bang controller

Hizarci B., KIRAL Z.

JOURNAL OF VIBRATION AND CONTROL , cilt.28, sa.1-2, ss.58-71, 2022 (SCI-Expanded, Scopus)

16. AIRFOIL SHAPE OPTIMIZATION USING BEZIER CURVE AND GENETIC ALGORITHM

AYAZ ÜMÜTLÜ H. C., KIRAL Z.

AVIATION , cilt.26, sa.1, ss.32-40, 2022 (ESCI, Scopus)

17. Design of three-strand compact spinning system and numerical flow-field simulation for different structures of air-suction guides and suction inserts

DEMİR M., KILIÇ M., Sayin S., KIRAL Z., Balduk F., Denge K. K.

TEXTILE RESEARCH JOURNAL , cilt.91, ss.1795-1814, 2021 (SCI-Expanded, Scopus)

18. Fault severity detection of a worm gearbox based on several feature extraction methods through a developed condition monitoring system

Hizarci B., ÜMÜTLÜ R. C., KIRAL Z., ÖZTÜRK H.

SN APPLIED SCIENCES , cilt.3, sa.1, 2021 (ESCI, Scopus)

19. Free vibration and buckling analyses of laminated composite plates with cutout

ATİLLA D., Sencan C., GÖREN KIRAL B., KIRAL Z.

ARCHIVE OF APPLIED MECHANICS , cilt.90, sa.11, ss.2433-2448, 2020 (SCI-Expanded, Scopus)

20. GPS’siz Ortamlarda Kendini Onaran Ağ Mimarisi Kullanan Sürü Uçuşunun Web Tabanlı Kontrolü

KESKİN O., KIRAL Z.

Deu Muhendislik Fakultesi Fen ve Muhendislik , cilt.22, sa.65, ss.625-637, 2020 (TRDizin)

21. Parametric design and analysis of industrial dye mixing machines

Umutlu H. C. A., KIRAL Z.

ARCHIVE OF MECHANICAL ENGINEERING , cilt.67, sa.2, ss.211-227, 2020 (ESCI, Scopus)

22. Classification of pitting fault levels in a worm gearbox using vibration visualization and ANN

ÜMÜTLÜ R. C., Hizarci B., ÖZTÜRK H., KIRAL Z.

SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES , cilt.45, sa.1, 2020 (SCI-Expanded, Scopus)

23. Vibration Region Analysis for Condition Monitoring of Gearboxes Using Image Processing and Neural Networks

Hizarci B., ÜMÜTLÜ R. C., Ozturk H., Kiral Z.

EXPERIMENTAL TECHNIQUES , cilt.43, sa.6, ss.739-755, 2019 (SCI-Expanded, Scopus)

24. Hava Jet İtkileri Kullanarak Mühendislik Yapılarının Aktif Titreşim Kontrolü

HIZARCI B., KIRAL Z.

Konya Mühendislik Bilimleri Dergisi , cilt.7, ss.933-947, 2019 (TRDizin)

25. Effect of inner stiffeners on vibration and noise levels of gearbox housing without changing the mass

ÜMÜTLÜ R. C., Hizarci B., Dalbicer C., ÖZTÜRK H., KIRAL Z.

JOURNAL OF MEASUREMENTS IN ENGINEERING , cilt.7, sa.2, ss.58-66, 2019 (ESCI, Scopus)

26. Classification of Helical Gear Fault Levels Using Frequency Component Based Statistical Analysis with ANN.

Ümütlü R. C., Hızarcı B., Öztürk H., Kıral Z.

Usak University Journal of Engineering Sciences , cilt.1, sa.2, ss.76-86, 2018 (Hakemli Dergi)

27. Titreşim Bölgesi Analizi ile Bir Dişli Kutusunda Yüzey Oyukçuk Hata Seviyelerinin Tespiti

Hızarcı B., Ümütlü R. C., Kıral Z., Öztürk H.

Mühendis ve Makina , cilt.59, sa.693, ss.13-32, 2018 (TRDizin)

28. Determination of Cutting Parameters in End Milling Operation based on the Optical Surface Roughness Measurement

Taga O., KIRAL Z., Yaman K.

INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING , cilt.17, sa.5, ss.579-589, 2016 (SCI-Expanded, Scopus)

29. Vibration and buckling analysis of a curved sandwich composite beam with FEM

TOYGAR E. M., SAYMAN O., KEMİKLİOĞLU U., ÖZTÜRK H., KIRAL Z., MALEKI F. K.

Research on Engineering Structures Materials , cilt.2, 2016 (TRDizin)

30. Dynamic Analysis of Elastically Supported Cracked Beam Subjected to a Concentrated Moving Load

ÖZTÜRK H., KIRAL Z., GÖREN KIRAL B.

LATIN AMERICAN JOURNAL OF SOLIDS AND STRUCTURES , cilt.13, sa.1, ss.175-200, 2016 (SCI-Expanded, Scopus)

31. Stability analysis of delaminated composite beams

GÖREN KIRAL B., KIRAL Z., ÖZTÜRK H.

COMPOSITES PART B-ENGINEERING , cilt.79, ss.406-418, 2015 (SCI-Expanded, Scopus)

32. Harmonic response analysis of symmetric laminated composite beams with different boundary conditions

KIRAL Z.

SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS , cilt.21, sa.4, ss.559-569, 2014 (SCI-Expanded, Scopus)

33. Analysis of Rolling Element Bearing Faults Via Curve Length Transform

KIRAL Z., Yigit A., GÜRSES B. O.

JOURNAL OF VIBRATION ENGINEERING & TECHNOLOGIES , cilt.2, sa.3, ss.279-298, 2014 (SCI-Expanded, Scopus)

34. Effect of the root crack on the lateral buckling loads and natural frequencies of sandwich composite beams

KIRAL Z., TOYGAR E. M., GÖREN KIRAL B., Sayman O.

COMPOSITES PART B-ENGINEERING , cilt.53, ss.308-313, 2013 (SCI-Expanded, Scopus)

35. Effect of interface crack on lateral buckling behavior and free vibration response of a sandwich composite beam

TOYGAR E. M., KIRAL Z., Sayman O., ARMAN Y., Ozen M.

JOURNAL OF COMPOSITE MATERIALS , cilt.47, sa.15, ss.1843-1851, 2013 (SCI-Expanded, Scopus)

36. Effect of impact failure on the damping characteristics of beam-like composite structures

KIRAL Z., Icten B. M., GÖREN KIRAL B.

COMPOSITES PART B-ENGINEERING , cilt.43, sa.8, ss.3053-3060, 2012 (SCI-Expanded, Scopus)

37. İnsan Bacak Hareketleri İçin Prototip Dış İskelet Robotik Sisteminin Mekanik Tasarımı ve Hareket Verilerinin Yapay Sinir Ağları İle Elde Edilmesi

Toygar E. M., Özkurt A., Kıral Z., Çakmakçı M., Gören Kıral B., Şenol Y., et al.

Sakarya Üniversitesi Fen Bilimleri Enstitüsü Dergisi , cilt.16, sa.3, ss.234-248, 2012 (Hakemli Dergi)

38. Experimental Investigation of the Dynamic Response of a Symmetric Laminated Composite Beam Via Laser Vibrometry

KIRAL Z., MALGACA L., AKDAĞ M., GÖREN KIRAL B.

JOURNAL OF COMPOSITE MATERIALS , cilt.43, sa.24, ss.2943-2962, 2009 (SCI-Expanded, Scopus)

39. Damped Response of Symmetric Laminated Composite Beams to Moving Load with Different Boundary Conditions

KIRAL Z.

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES , cilt.28, sa.20, ss.2511-2526, 2009 (SCI-Expanded, Scopus)

40. Effect of Elastic Foundation on the Dynamic Response of Laminated Composite Beams to Moving Loads

GÖREN KIRAL B., KIRAL Z.

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES , cilt.28, sa.8, ss.913-935, 2009 (SCI-Expanded, Scopus)

41. NUMERICAL INVESTIGATION OF THE DYNAMIC RESPONSE OF SYMMETRIC LAMINATED COMPOSITE BEAMS TO HARMONIC EXCITATIONS

KIRAL Z.

ADVANCED COMPOSITES LETTERS , cilt.18, sa.5, ss.163-172, 2009 (SCI-Expanded, Scopus)

42. Active control of residual vibrations of a cantilever smart beam

KIRAL Z., MALGACA L., AKDAĞ M.

Turkish Journal of Engineering and Environmental Sciences , cilt.32, sa.1, ss.51-57, 2008 (Scopus, TRDizin)

43. Dynamic analysis of a symmetric laminated composite beam subjected to a moving load with constant velocity

KIRAL Z., GÖREN KIRAL B.

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES , cilt.27, sa.1, ss.19-32, 2008 (SCI-Expanded, Scopus)

44. Vibration analysis of rolling element bearings with various defects under the action of an unbalanced force

KIRAL Z., KARAGÜLLE H.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING , cilt.20, sa.8, ss.1967-1991, 2006 (SCI-Expanded, Scopus)

45. Simulation and analysis of vibration signals generated by rolling element bearing with defects

Kiral Z., KARAGÜLLE H.

TRIBOLOGY INTERNATIONAL , cilt.36, sa.9, ss.667-678, 2003 (SCI-Expanded, Scopus)

46. Interior acoustics of a truck cabin with hard and impedance surfaces

Sarigul A. S., Kiral Z.

ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS , cilt.23, sa.9, ss.769-775, 1999 (SCI-Expanded)

Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 54

1. Dönen Makinelerde Rulman ve Dengesizlik Arızalarının Yapay Sinir Ağları Kullanılarak Tespiti

Yardımcı İ., Kaya M. S., Öztürk H., Kıral Z.

11. Uluslararası Katılımlı Bakım Teknolojileri Kongresi ve Sergisi, Denizli, Türkiye, 16 - 18 Ekim 2025, cilt.1, sa.1, ss.1-10, (Tam Metin Bildiri)

2. Vibration Analysis of a 3D Printer Caused by The Movement of The Printing Head

Mutlu A., Kıral Z.

8th International Mediterranean Congress on Scientific Research, Antalya, Türkiye, 13 - 15 Ağustos 2025, cilt.1, ss.568-576, (Tam Metin Bildiri)

3. Design of a Linkage Mechanism For Use in Industrial Food Machines

Akbaba S., Kıral Z.

8th International Mediterranean Congress on Scientific Research, Antalya, Türkiye, 13 - 15 Ağustos 2025, cilt.1, ss.490-502, (Tam Metin Bildiri)

4. Kablo Tahrikli Ters Esnek Mafsallı Esnek Robotik Tutucuların Tasarımı

Aral Z. E., Özdemir D., Pehlivan E., Gören Kıral B., Kıral Z.

ICSAS 5. Uluslararası Fen ve Uygulamalı Bilimler Kongresi, İzmir, Türkiye, 15 - 17 Ağustos 2025, (Tam Metin Bildiri)

5. Effect of Nano-Sized Additive Particles on The Vibration Characteristics of SLA 3D Printed Cantilever Beams

Çavdar Ş., KIRAL Z., GÖREN KIRAL B.

11th International Azerbaijan Congress on Life, Engineering, Mathematical, and Applied Sciences, Baku, Azerbaycan, 21 Haziran 2025, cilt.1, sa.1, ss.369-377, (Tam Metin Bildiri)

6. Investigating The Influence of Micro-Spoiler Placement on The Aerodynamic Characteristics and Vibration Behavior of NACA0021 Airfoil

Karakuş A., Kıral Z.

6. Uluslararası Boğaziçi Bilimsel Araştırmalar Kongresi, İstanbul, Türkiye, 18 - 19 Ocak 2025, cilt.1, sa.1, ss.628-647, (Tam Metin Bildiri)

7. Development of a Surveillance System for Safe Operation of Robot Manipulators

KATIRCI M. M. C., KIRAL Z.

5. International Antalya Scientific Research and Innovative Studies Congress, Antalya, Türkiye, 12 Ağustos 2023, cilt.1, sa.1, ss.557-569, (Tam Metin Bildiri)

8. The Experimental Free Vibration Analysis of an Aluminum K Feldspar Metal Matrix Composite Plate

Daş O., Öztürk H., Kıral Z., Gören Kıral B., Yücel Öztürk Y., Uyulgan B., et al.

EURODYN2023, Amsterdam, Hollanda, 3 - 05 Temmuz 2023, ss.1-2, (Tam Metin Bildiri)

9. Structural Analysis and Fatigue Life Evaluation of Bracket Type Components Subjected To Random Excitations

Yeşilçimen Ü., Kıral Z.

10. Uluslararası İstanbul Bilimsel Araştırmalar Kongresi, İstanbul, Türkiye, 23 - 25 Temmuz 2022, cilt.1, ss.304-315, (Tam Metin Bildiri)

10. A Preliminary Experimental Study on the Effect of Reynolds Number on the Lift and Drag of a NACA-4415 Airfoil

Ayaz Ümütlü H. C., Kıral Z., Karadeniz Z. H.

6th International Students Science Congress, İzmir, Türkiye, 20 - 21 Mayıs 2022, cilt.1, ss.100, (Tam Metin Bildiri)

11. Vibration Analysis of Journal Bearings Subjected To Time-Varying Joint Forces

SEÇER B., KIRAL Z.

Çukurova 8th International Scientific Researches Conference, Adana, Türkiye, 15 - 17 Nisan 2022, cilt.2, ss.303-310, (Tam Metin Bildiri)

12. DESIGN OF NOVEL COMPACT THREE-ROVING SPINNING TECHNOLOGY

DEMİR M., KILIÇ M., SAYIN S., KIRAL Z., BALDUK F., DENGE K. K.

The International Conference of Materials and Engineering Technology (TICMET), Gaziantep, Türkiye, 5 - 07 Kasım 2020, ss.428-433, (Tam Metin Bildiri)

13. Hava Jet İtkileri Kullanarak Mühendislik Yapılarının Aktif Titreşim Kontrolü

HIZARCI B., KIRAL Z.

19. Ulusal Makine Teorisi Sempozyumu, Hatay, Türkiye, 4 - 06 Eylül 2019, ss.241-250, (Tam Metin Bildiri)

14. Control of a Tripteron Robot by UsingArtificial Neural Networks

SAYIN S., KIRAL Z.

VI. Uluslararası Fen, Mühendislik ve Mimarlık Bilimlerinde Akademik Çalışmalar Sempozyumu, Ankara, Türkiye, 13 - 15 Haziran 2019, ss.761-771, (Tam Metin Bildiri)

15. Kendinden Dengelemeli Bir Elektrikli Scooter İçin Kontrol Sistemi Tasarımı ve Simülasyonu

SARIGÜL S., KIRAL Z.

Erasmus International Academic Research Symposium in Science, Engineering and Architecture, İzmir, Türkiye, 5 - 06 Nisan 2019, ss.197-210, (Tam Metin Bildiri)

16. Parametric Modeling of a Rolling Element Bearing Geometry For Vibration Analysis

DURMUŞ S. N., KIRAL Z.

Erasmus International Academic Research Symposium in Science, Engineering and Architecture, İzmir, Türkiye, 5 - 06 Nisan 2019, ss.489-505, (Tam Metin Bildiri)

17. Experimental Failure Analysis of Thrust Bearings

EMİR H. O., KIRAL Z.

Erasmus International Academic Research Symposium in Science, Engineering and Architecture, İzmir, Türkiye, 5 - 06 Nisan 2019, ss.389-401, (Tam Metin Bildiri)

18. Yapısal Cevap Kontrolü İçin Bir Elektromanyetik Tahrik Sisteminin Tasarımı ve Uygulanması

GENİŞ G., KIRAL Z.

4. Uluslararası Bilimsel Araştırmalar Kongresi, Bursa, Türkiye, 14 - 17 Şubat 2019, ss.91-101, (Tam Metin Bildiri)

19. A Review on Multi-Strand Staple Yarn Production

DEMİR M., KILIÇ M., KIRAL Z., DENGE K. K., BALDUK F.

22nd International Conference, Structure and Structural Mechanics of Textiles, Liberec, Çek Cumhuriyeti, 5 - 07 Aralık 2018, ss.280-286, (Tam Metin Bildiri)

20. Air-Flow Analysis of Compact Yarn

DEMİR M., KILIÇ M., KIRAL Z., SAYIN S., DENGE K. K., BALDUK F.

22nd International Conference, Structure and Structural Mechanics of Textiles, Liberec, Çek Cumhuriyeti, 5 - 07 Aralık 2018, ss.167-172, (Tam Metin Bildiri)

21. Kompozit Plakalardaki Deliklerin Yeri, Şekli ve Sayısının Kritik Burkulma Yükü Üzerindeki Etkisi

ATİLLA D., ŞENCAN C., GÖREN KIRAL B., KIRAL Z.

3rd International Mediterranean Science and Engineering Congress (IMSEC 2018), Adana, Türkiye, 24 - 26 Kasım 2018, ss.1099-1102, (Tam Metin Bildiri)

22. Smart Servo Motor Based Eight-Legged Explorer Robot Design and Implementation

ŞENOL A., KIRAL Z.

3rd Intrernational Congress on Engineering, Architecture and Design, 4 - 05 Mayıs 2018, ss.32-33, (Özet Bildiri)

23. Effect of Gearbox Structural Design on the Vibration Levels

ÜMÜTLÜ R. C., HIZARCI B., DALBİÇER C., ÖZTÜRK H., KIRAL Z.

ICENTE 17, Konya, Türkiye, 7 - 09 Aralık 2017, ss.795-799, (Tam Metin Bildiri)

24. Titreşim Bölgesi Analizi İle Bir Dişli Kutusunda Yüzey Oyukçuk Hata Seviyelerinin Tespiti

HIZARCI B., ÜMÜTLÜ R. C., KIRAL Z., ÖZTÜRK H.

BTKS 2017, Denizli, Türkiye, 28 - 30 Eylül 2017, (Tam Metin Bildiri)

25. On the Parametric Design and Analysis of Industrial Dye Mixing Machines

AYAZ H. C., KIRAL Z.

3rd International Conference on Engineering and Natural Sciences, Budapest, Macaristan, 3 - 07 Mayıs 2017, ss.687-694, (Tam Metin Bildiri)

26. Yapay Sinir Ağları Kullanarak Helisel Dişli Kutusundaki Oyukçuk Hata Seviyelerinin Tespiti

HIZARCI B., ÜMÜTLÜ R. C., ÖZTÜRK H., KIRAL Z.

UMTS 2017, Türkiye, 5 - 07 Temmuz 2017, (Tam Metin Bildiri)

27. Fault Detection and Pitting Level Classification in Helical Gearbox by Examining Frequency Spectrum

ÜMÜTLÜ R. C., HIZARCI B., ÖZTÜRK H., KIRAL Z.

ICENS 2017, Budapest, Macaristan, 3 - 07 Mayıs 2017, ss.232, (Özet Bildiri)

28. Smart condition monitoring of worm gearbox

Hizarci B., ÜMÜTLÜ R. C., KIRAL Z., ÖZTÜRK H.

45th International Congress and Exposition on Noise Control Engineering: Towards a Quieter Future, INTER-NOISE 2016, Hamburg, Almanya, 21 - 24 Ağustos 2016, ss.6535-6544, (Tam Metin Bildiri)

29. Pitting detection in a worm gearbox using artificial neural networks

ÜMÜTLÜ R. C., Hizarci B., ÖZTÜRK H., KIRAL Z.

45th International Congress and Exposition on Noise Control Engineering: Towards a Quieter Future, INTER-NOISE 2016, Hamburg, Almanya, 21 - 24 Ağustos 2016, ss.6526-6534, (Tam Metin Bildiri)

30. Üç Boyutlu Baskı Tekniği İle Nesnelerin Üretimi

ACAR YAVUZ G., KIRAL Z.

3B Baskı Teknolojileri Uluslararası Sempozyumu, 5 - 07 Mayıs 2016, (Tam Metin Bildiri)

31. Bitirme Operasyonunda Kesme Parametrelerine Göre Yüzey Pürüzlülüğünün Gerçek Zamanlı Kontrolü

TAGA Ö., KIRAL Z., YAMAN K.

Ulusal Makine Teorisi Sempozyumu UMTS2015, Türkiye, 14 - 17 Haziran 2015, (Tam Metin Bildiri)

32. Dört Rotorlu Hava Aracının Görüntü İşleme İle Kontrolü

KESKİN O., KIRAL Z.

16. Makine Teorisi Sempozyumu UMTS 2013, Türkiye, 12 - 13 Eylül 2013, (Tam Metin Bildiri)

33. Monitoring and Determination of Wind Energy Potential by Web Based Wireless Network

Keskin O., Ates I., Karadeniz Z. H., TURGUT A., KIRAL Z.

11th IEEE International Conference on Machine Learning and Applications (ICMLA), Florida, Amerika Birleşik Devletleri, 12 - 15 Aralık 2012, ss.526-530, (Tam Metin Bildiri) Sürdürülebilir Kalkınma