Prof. Dr. TUNCAY DİKİCİ

Yayın Ağı

Makaleler 52

1. Non-isothermal Kinetic Analysis of High Temperature Oxidation of Additively Manufactured Ti-6Al-4V Alloy

DEMİRCİ S., KIRAN YILDIRIM B., TÜNÇAY M. M., Kaya N., DİKİCİ T.

Journal of Materials Engineering and Performance , cilt.34, sa.7, ss.5773-5784, 2025 (SCI-Expanded, Scopus)

2. The structural, magnetic, and optical properties of flame spray pyrolysis-derived spinel NiFe2O4 nanoparticles

Yildirim S., Ozler B., Ozdemir E. T., Erol M., Dikici T., Oguzlar S.

AMERICAN CERAMIC SOCIETY, JOURNAL , cilt.108, sa.2, ss.1-13, 2025 (SCI-Expanded, Scopus)

3. Deposition of HA-GO on ASO modified Ti surface by EPD method and characterization of surface and biological properties of the coating

Kırman M., Doğan H., Dikici T.

CERAMICS INTERNATIONAL , cilt.51, sa.3, ss.3703-3713, 2025 (SCI-Expanded, Scopus)

4. Structural and Nanomechanical Properties of Silicon Single Crystals Grown by the Czochralski Method

Dikici T., Yıldırım S.

Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi , cilt.27, sa.79, ss.121-125, 2025 (TRDizin)

5. Electrodeposited ZnO Nanostructures on ITO Surfaces: Exploring Their Efficacy for Cholesterol Biosensing Applications

EROL M., AYKAÇ A., DİKİCİ T., YURDDAŞKAL M., KARTAL U., Uzunbayır B., et al.

Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi , cilt.26, 2024 (TRDizin) Sürdürülebilir Kalkınma

6. Evaluation of the shielding effectiveness of electrodeposited Zn–Ni, Zn–Co, Ni–Co, and Zn–Ni–Co alloy coatings

Ölçen K. K., DİKİCİ T.

Journal of Materials Science: Materials in Electronics , cilt.35, sa.19, 2024 (SCI-Expanded, Scopus)

7. Effect of time and voltage on the morphology of TiO2 films produced by anodization

YILMAZ O., Ebeoglugil F., DİKİCİ T., DALMIŞ R.

Journal of the Australian Ceramic Society , cilt.60, sa.3, ss.809-822, 2024 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

8. Nanoindentation and Corrosion Behavior of Additively Manufactured Ti-6Al-4V Alloy for Biomaterial Applications

Demirci S., Dikici T., Dalmış R.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE , cilt.33, ss.2133-2145, 2024 (SCI-Expanded, Scopus)

9. Dental implantlar için farklı yüzey modifikasyon tekniklerinin titanyumun yüzey özelliklerine etkilerinin karşılaştırılması

Kırman M., Dikici T., Doğan H.

Dicle Üniversitesi Mühendislik Fakültesi Mühendislik Dergisi , cilt.14, sa.3, ss.449-454, 2023 (TRDizin)

10. Effects of annealing on the structural and magnetic properties of flame spray pyrolyzed MnFe₂O₄ nanoparticles

Ozdemir E. T., Yıldırım S., Ozler B., Dikici T., Erol M., Yurddaskal M.

INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY , cilt.20, sa.6, ss.3775-3785, 2023 (SCI-Expanded, Scopus)

11. Effect of anodizing time on the structural color and photocatalytic properties of the TiO2 films formed by electrochemical method

Yilmaz O., Ebeoglugil M. F., Dalmis R., Dikici T.

MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING , cilt.67, ss.1-11, 2023 (SCI-Expanded, Scopus)

12. Development of structural colored TiO₂ thin films by varied etching solutions

Yılmaz O., Dalmış R., Dikici T., Ebeoğlugil M. F.

MATERIALS RESEARCH EXPRESS , cilt.10, sa.5, 2023 (SCI-Expanded, Scopus)

13. Preparation and photocatalytic performances of ZnO nanostructures: Effects of anodization voltage and time

Oksuz A. E., Yurddaşkal M., Doluel E. C., Kartal U., Dikici T.

SURFACE AND INTERFACE ANALYSIS , cilt.55, sa.3, ss.192-200, 2023 (SCI-Expanded, Scopus)

14. Production of Zn-doped TiO2 film with enhanced photocatalytic activity

Dikici T., Yılmaz O., Akalın A., Demirci S., Gültekin S., Yıldırım S., et al.

JOURNAL OF THE AUSTRALIAN CERAMIC SOCIETY , cilt.58, ss.1415-1421, 2022 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

15. Investigation of surface-modified EBM printed Ti-6Al-4V alloys for biomedical applications

Demirci S., Dikici T., Tünçay M. M., Dalmış R., Kaya N., Kanbur K., et al.

Surfaces and Interfaces , cilt.34, sa.000, ss.1-11, 2022 (SCI-Expanded)

16. ZnO nanostructures for photocatalytic degradation of methylene blue: Effect of different anodization parameters

Oksuz A. E., Yurddaskal M., Kartal U., Dikici T., Erol M.

JOURNAL OF THE KOREAN CERAMIC SOCIETY , cilt.59, ss.859-868, 2022 (SCI-Expanded, Scopus)

17. Micro/Nanoscale Surface Modification of Ti6Al4V Alloy for Implant Applications

DEMİRCİ S., DİKİCİ T., GÜLLÜOĞLU A. N.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE , cilt.31, sa.2, ss.1503-1511, 2022 (SCI-Expanded, Scopus)

18. Influence of electrolyte composition on the microstructure and photocatalytic activity of TiO2 nanostructures

YILMAZ O., Ebeoglugil F., DEMİRCİ S., DİKİCİ T.

JOURNAL OF THE AUSTRALIAN CERAMIC SOCIETY , cilt.58, sa.1, ss.123-133, 2022 (SCI-Expanded, Scopus)

19. Effect of surface modifications of additively manufactured Ti-6Al-4V alloys on apatite formation ability for biomedical applications

DEMİRCİ S., DALMIŞ R., DİKİCİ T., TÜNÇAY M. M., Kaya N., GÜLLÜOĞLU A. N.

Journal of Alloys and Compounds , cilt.887, 2021 (SCI-Expanded, Scopus)

20. A new concept for the eco-friendly structural colorization of anodic titania: Photonic crystal structure

DALMIŞ R., YILMAZ O., DİKİCİ T.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS , cilt.631, 2021 (SCI-Expanded, Scopus)

21. Photocatalytic activity of the thermally oxidized Zn-Ni-, Zn-Co-, Ni-Co-, and Zn-Ni-Co-coated alloy films

Demirci S., Dikici T., Yurddaşkal M.

JOURNAL OF THE AUSTRALIAN CERAMIC SOCIETY , cilt.57, sa.5, ss.1531-1539, 2021 (SCI-Expanded, Scopus)

22. A comparative study on structural, morphological and photocatalytic properties of anodically grown ZnO nanowires under varying parameters

Ozdemir E. T., Kartal U., DİKİCİ T., EROL M., YURDDAŞKAL M.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS , cilt.32, sa.23, ss.27398-27408, 2021 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

23. Effect of heating rate on structure, morphology and photocatalytic properties of TiO2 particles: thermal kinetic and thermodynamic studies

DİKİCİ T., DEMİRCİ S., TÜNÇAY M. M., Yildirim B. K., KAYA N.

JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY , cilt.97, sa.3, ss.622-637, 2021 (SCI-Expanded, Scopus)

24. Effect of Ag Content on Photocatalytic Activity of Ag@TiO2/rGO Hybrid Photocatalysts

DOLUEL E. C., Kartal U., DİKİCİ T., YURDDAŞKAL M.

JOURNAL OF ELECTRONIC MATERIALS , cilt.49, sa.6, ss.3849-3859, 2020 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

25. A study of heating rate effect on the photocatalytic performances of ZnO powders prepared by sol-gel route: Their kinetic and thermodynamic studies

DEMİRCİ S., DİKİCİ T., TÜNÇAY M. M., KAYA N.

APPLIED SURFACE SCIENCE , cilt.507, 2020 (SCI-Expanded, Scopus)

26. Asidik dağlama prosesinde farklı HCl/H2SO4 oranının titanyumun yüzey morfolojisi ve pürüzlülüğüne etkisi

DİKİCİ T.

Dicle Üniversitesi Mühendislik Fakültesi Mühendislik Dergisi , cilt.10, sa.3, ss.999-1007, 2019 (TRDizin) Sürdürülebilir Kalkınma

27. Nikel-Kobalt (Ni-Co) Alaşımlı Kaplamalarda Co Miktarının Mikroyapıya Etkisi

DİKİCİ T.

Gümüşhane Üniversitesi Fen Bilimleri Enstitüsü Dergisi , cilt.9, sa.2, ss.284-289, 2019 (TRDizin)

28. Influence of thermal oxidation temperature on the microstructure and photoelectrochemical properties of ZnO nanostructures fabricated on the zinc scraps

DİKİCİ T., DEMİRCİ S.

JOURNAL OF ALLOYS AND COMPOUNDS , cilt.779, ss.752-761, 2019 (SCI-Expanded, Scopus)

29. Nanoyapılı TiO2 film yüzeyinde TiO2/ZnO ve TiO2/CuO heteroyapıların oluşturulması ve fotokatalitik aktivitelerinin incelenmesi

DİKİCİ T., YURDDAŞKAL M.

Erzincan Üniversitesi Fen Bilimleri Enstitüsü Dergisi , cilt.12, sa.1, ss.63-73, 2019 (TRDizin)

30. Influence of growth parameters on the properties of TiO2 films prepared by anodic spark oxidation method and photocatalytic degradation of methylene blue

Dikici T., Yurddaşkal M., Yıldırım S., Celik E.

JOURNAL OF THE AUSTRALIAN CERAMIC SOCIETY , cilt.54, sa.3, ss.451-458, 2018 (SCI-Expanded, Scopus)

31. Anodik spark oksitleme tekniği ile üretilen titanyum dioksit (TiO2) kaplamaların karakterizasyonu ve fotokatalitik özellikleri

DİKİCİ T., YURDDAŞKAL M.

Balıkesir Üniversitesi Fen Bilimleri Enstitüsü Dergisi , cilt.20, sa.1, ss.83-93, 2018 (TRDizin)

32. Fabrication and characterization of novel iodine doped hollow and mesoporous hematite (Fe2O3) particles derived from sol-gel method and their photocatalytic performances

Demirci S., Yurddaşkal M., Dikici T., Sanoglu C.

JOURNAL OF HAZARDOUS MATERIALS , cilt.345, ss.27-37, 2018 (SCI-Expanded, Scopus)

33. Enhanced photocatalytic properties of Sn-doped ZnO nanoparticles by flame spray pyrolysis under UV light irradiation

Yurddaşkal M., Yıldırım S., Dikici T., Yurddaskal M., Erol M., Aritman İ., et al.

Journal of the Turkish Chemical Society, Section A: Chemistry , cilt.5, ss.15-22, 2018 (Scopus, TRDizin)

34. Effect of annealing temperatures on the crystallization and photocatalytic activity of micro-nanoporous TiO2 films produced by electrochemical anodization

Yurddaskal M., YURDDAŞKAL M., DİKİCİ T., Durmus H.

Journal of the Turkish Chemical Society, Section A: Chemistry , cilt.5, ss.85-92, 2018 (Scopus, TRDizin)

35. Effects of Zn-doping on the photocatalytic activity and microstructures of nanocrystalline SnO2 powders

Yurddaşkal M., Yıldırım S., Dikici T., Yurddaskal M., Erol M., Aritman İ., et al.

Journal of the Turkish Chemical Society, Section A: Chemistry , cilt.5, ss.9-14, 2018 (Scopus, TRDizin)

36. The effects of growth conditions on the surface properties and photocatalytic activities of anatase TiO2 films prepared via electrochemical anodizing and annealing methods

Dikici T., Yurddaşkal M., Demirci S., Celik E.

JOURNAL OF POROUS MATERIALS , cilt.24, sa.6, ss.1535-1544, 2017 (SCI-Expanded, Scopus)

37. Effects of disc milling parameters on the physical properties and microstructural characteristics of Ti6Al4V powders

DİKİCİ T., SÜTÇÜ M.

JOURNAL OF ALLOYS AND COMPOUNDS , cilt.723, ss.395-400, 2017 (SCI-Expanded, Scopus)

38. Temperature-dependent growth of ZnO structures by thermal oxidation of Zn coatings electrodeposited on steel substrates and their photocatalytic activities

DİKİCİ T.

CERAMICS INTERNATIONAL , cilt.43, sa.11, ss.8289-8293, 2017 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

39. Enhanced photocatalytic activity of micro/nano textured TiO2 surfaces prepared by sandblasting/acid-etching/anodizing process

DİKİCİ T., DEMİRCİ S., EROL M.

JOURNAL OF ALLOYS AND COMPOUNDS , cilt.694, ss.246-252, 2017 (SCI-Expanded, Scopus)

40. Synthesis and Characterization of Gd2O2SO4.Pr3+ Scintillation Material Produced by Sol-Gel Process for Digital Imaging System

Aritman I., Yıldırım S., Kisa A., Guleryuz L. F., Yurddaşkal M., Dikici T., et al.

ACTA PHYSICA POLONICA A , cilt.131, sa.1, ss.106-108, 2017 (SCI-Expanded, Scopus)

41. Synthesis and characterization of Ag doped TiO2 heterojunction films and their photocatalytic performances

Demirci S., Dikici T., Yurddaşkal M., Gultekin S., Toparli M., Celik E.

APPLIED SURFACE SCIENCE , cilt.390, ss.591-601, 2016 (SCI-Expanded, Scopus)

42. Effect of annealing temperature on the surface properties and photocatalytic efficiencies of Cu2O/CuO structures obtained by thermal oxidation of Cu layer on titanium substrates

Yurddaşkal M., Dikici T., Celik E.

CERAMICS INTERNATIONAL , cilt.42, sa.15, ss.17749-17753, 2016 (SCI-Expanded, Scopus)

43. Preparation and Characterization of Ni-TiO2 Nanocomposite Coatings Produced by Electrodeposition Technique

Birlik I., Ak Azem N. F., Toparlı M., Çelik E., Koc Delice T., Yıldırım S., et al.

Frontiers in Materials , cilt.3, ss.1-7, 2016 (Scopus)

44. Structural and luminescence properties of undoped, Nd3+ and Er3+ doped TiO2 nanoparticles synthesized by flame spray pyrolysis method

Yıldırım S., Yurddaşkal M., Dikici T., Aritman İ., Ertekin K., Celik E.

CERAMICS INTERNATIONAL , cilt.42, sa.9, ss.10579-10586, 2016 (SCI-Expanded, Scopus)

45. Microstructure and mechanical properties of nanostructured and microstructured TiO2 films

DİKİCİ T., Toparli M.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING , cilt.661, ss.19-24, 2016 (SCI-Expanded, Scopus)

46. The investigation of antistatic effects of 1-ethyl-2,3-dimethylimidazolium ethyl sulphate for acrylic-based polymer film

SEKİ Y., Yildiz N., Ince M., Sengul S., Sever K., Sarikanat M., et al.

PLASTICS RUBBER AND COMPOSITES , cilt.45, sa.8, ss.362-367, 2016 (SCI-Expanded, Scopus)

47. Fabrication and characterization of nanostructured anatase TiO2 films prepared by electrochemical anodization and their photocatalytic properties

Yurddaşkal M., Dikici T., Yıldırım S., Yurddaşkal M., Toparli M., Celik E.

JOURNAL OF ALLOYS AND COMPOUNDS , cilt.651, ss.59-71, 2015 (SCI-Expanded, Scopus)

48. A comparative study on the photocatalytic activities of microporous and nanoporous TiO2 layers prepared by electrochemical anodization

Dikici T., Yıldırım S., Yurddaşkal M., Erol M., Yigit R., Toparli M., et al.

SURFACE & COATINGS TECHNOLOGY , cilt.263, ss.1-7, 2015 (SCI-Expanded, Scopus)

49. The effect of anodization parameters on the formation of nanoporous TiO2 layers and their photocatalytic activities

EROL M., DİKİCİ T., Toparli M., Celik E.

JOURNAL OF ALLOYS AND COMPOUNDS , cilt.604, ss.66-72, 2014 (SCI-Expanded, Scopus)

50. Formation and characterisation of nanoporous TiO2 layers on microroughened titanium surfaces by electrochemical anodisation

DİKİCİ T., Guzelaydin A. H., Toparli M.

MICRO & NANO LETTERS , cilt.9, sa.2, ss.144-148, 2014 (SCI-Expanded, Scopus)

51. Characterization and photocatalytic properties of nanoporous titanium dioxide layer fabricated on pure titanium substrates by the anodic oxidation process

DİKİCİ T., Erol M., Toparli M., Celik E.

CERAMICS INTERNATIONAL , cilt.40, sa.1, ss.1587-1591, 2014 (SCI-Expanded, Scopus)

52. Study of the mechanical and structural properties of Zn-Ni-Co ternary alloy electroplating

Dikici T., Culha O., Toparli M.

JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH , cilt.7, sa.6, ss.787-792, 2010 (SCI-Expanded, Scopus)

Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 29

1. Investigation of the effect of voltage on the surface morphologies of Al2O3 structures produced by anodic oxdiation method

Balkan S., Yurddaşkal M., Dikici T.

III. International Cankaya Scientific Studies Congress, 28 - 29 Şubat 2024, ss.557-558, (Özet Bildiri)

2. Structural and Electromagnetic Characterization of Metal Alloy Coatings for Shielding Applications

Ölçen K. K., Dikici T.

3rd International Congress on Scientific Advances (ICONSAD'23), Yalova, Türkiye, 20 - 23 Aralık 2023, ss.450, (Özet Bildiri)

3. Talaşlı İmalat Uygulamaları İçin Otomat Çeliklerinde Bulunan Kurşun Elementinin İşlenebilirliğe Etkisinin İncelenmesi

Dağar B. G., Erçay H., Gündoğan N., Dikici T.

EGE 10th INTERNATIONAL CONFERENCE ON APPLIED SCIENCES, İzmir, Türkiye, 22 - 24 Aralık 2023, ss.1, (Özet Bildiri)

4. Farklı İşlemlerle Modifiye Edilen Titanyum Yüzeylerine EPD Yöntemiyle Kaplanan Hidroksiapatitin Yüzey Özelliklerinin İncelenmesi

Kırman M., Dikici T., Doğan H.

3. Uluslararası Bilimsel Gelişmeler Kongresi (ICONSAD'23), Yalova, Türkiye, 20 - 23 Aralık 2023, ss.486-487, (Özet Bildiri)

5. Optimizing Current Density and Concentration Parameters for Zn-Co Alloy Coatings

YILDIRIM S., DİKİCİ T., ARITMAN İ.

4th International Turkish World Engineering and Science Congress, Antalya, Türkiye, 30 Kasım - 03 Aralık 2023, (Tam Metin Bildiri)

6. INVESTIGATION OF ELECTRODE WELDING PARAMETERS OF HIGH TENSILE STRENGTH CRANE RAILS

Yetişken S., Kahraman C. E., Erçay H., Dikici T.

2. INTERNATIONAL CANKAYA SCIENTIFIC STUDIES CONGRESS, Ankara, Türkiye, 28 - 29 Eylül 2023, ss.569-570, (Özet Bildiri)

7. Investigation of the Effects of Decarburization Depth on the Mechanical Performance of Spring Steels

Tuna C., Kahraman C. E., Erçay H., Dikici T.

6th International Conference on Sustainable Science and Technology (ICSuSaT-2023), İstanbul, Türkiye, 14 - 16 Temmuz 2023, ss.65, (Özet Bildiri)

8. MAKAS İMALATINDA KULLANILAN 55Cr3 YAY ÇELİĞİNİNYÜZEYİNDEN YAPIŞKAN TUFALİN GİDERİLMESİ ÇALIŞMALARI

Gündoğan N., Kahraman C. E., Erçay H., Dikici T.

11th nternational Congress on Engineering, Architecture and Design, İstanbul, Türkiye, 10 - 12 Haziran 2023, ss.1, (Özet Bildiri)

9. THE EFFECT OF THE ETCHING SOLUTION TYPE ON ANODIC TIO2 PHOTOCATALYSIS

YILMAZ O., EBEOĞLUGİL M. F., DALMIŞ R., DİKİCİ T.

3. INTERNATIONAL CONGRESS ON LIFE, SOCIAL, AND HEALTH SCIENCES IN A CHANGING WORLD, Türkiye, 13 - 14 Kasım 2021, (Tam Metin Bildiri)

10. Effect of different voltages on the morphological and structural properties of ZnO nanowires

Öksüz A. E., Yurddaşkal M., Dikici T.

4. INTERNATIONAL CONFERENCE ON MATERIALS SCIENCE, MECHANICAL AND AUTOMOTIVE ENGINEERINGS AND TECHNOLOGY, Nevşehir, Türkiye, 28 - 30 Mayıs 2021, ss.272, (Özet Bildiri)

11. Çelik Tahkimat Profillerinde Ülke Standartlarının Değerlendirilmesi

YILMAZ O., DEMİRCİ S., DİKİCİ T., EBEOĞLUGİL M. F.

The 7th International Congress of Mining Machinery and Technologies (IMMAT), İzmir, Türkiye, 23 - 26 Ekim 2019, (Tam Metin Bildiri)

12. The effects of forging and cooling parameters on the toughness of micro-alloyed steel

TUNA C., ERÇAY H., DİKİCİ T.

I. International Science And Innovation Congress, 26 - 29 Ağustos 2019, (Özet Bildiri)

13. The Effect of Different Quenching Media and Tempering Temperature on the HardnessValue of R260 Quality Asymmetric Profile

GÜMÜŞ G., ERÇAY H., DİKİCİ T.

The Fourth International Iron and SteelSymposium (UDCS’19), Karabük, Türkiye, 4 - 06 Nisan 2019, (Özet Bildiri)

14. The Quality Steel In Turkey Past Today And Tomorrow

KAHRAMAN C. E., TATLICAN H. G., ERÇAY H., DİKİCİ T.

International Conference on Engineering Technologies (ICENTE’18), Konya, Türkiye, 26 - 28 Ekim 2018, (Özet Bildiri)

15. Effect of Thermal Oxidation Atmosphere on Photoelectrochemical (PEC) Water Splitting of Hematite Produced from Electrodeposited Fe Film

DEMİRCİ S., TÜNÇAY M. M., DİKİCİ T., SARIOĞLU C.

19 th InternationalMetallurgyand Materials25/27 October Congress, 25 - 27 Ekim 2018, (Tam Metin Bildiri) Sürdürülebilir Kalkınma

16. Investigation on the effect of boron on the hardenability of high strength structure steel

Tuna C., Gökçül K., Erçay H., DİKİCİ T.

3. International Conference on Material Science and Technology in Cappadocia (IMSTEC 2018), Nevşehir, Türkiye, 17 - 19 Eylül 2018, (Özet Bildiri)

17. Effect of annealing temperatures on the crystallization and photocatalytic activity of micro-nanoporous TiO2 films produced by electrochemical anodization

YURDDAŞKAL M., YURDDAŞKAL M., DİKİCİ T., DURMUŞ H.

3 rd International Porous and Powder Materials Symposium and Exhibition Symposium (PPM2017), Aydın, Türkiye, 12 - 15 Eylül 2017, (Tam Metin Bildiri)

18. Two-Steps Electrochemical Process for Growth of ZnO Nanostructures on Glass/ITO Substrate

UZUNBAYIR B., AYKAÇ A., EROL M., DİKİCİ T., GÜNEŞ F.

2nd International Students Science Congress, İzmir, Türkiye, 4 - 05 Mayıs 2018, (Tam Metin Bildiri)

19. Production and characterization of PMMA/TiO2 composite thin films for dielectric applications

GÜLTEKİN S., Yılmaz O., DİKİCİ T., YURDDAŞKAL M., ÇELİK E.

4th International Conference on Engineering and Natural Sciences, 2 - 06 Mayıs 2018, (Özet Bildiri)

20. Fabrication and characterization of α-Fe2O3 films from electrodeposited Fe films for photoelectrochemical water splitting performance

DİKİCİ T.

The Internatinonal Conference on Materials Science Mechanical and Automation Engineerings and Technology in Çeşme/İZMİR (IMSMATEC’18), İzmir, Türkiye, 10 - 12 Nisan 2018, (Özet Bildiri) Sürdürülebilir Kalkınma

21. The effect of acid etching temperature on the surface properties of Ti6Al4V

Yurddaskal M., Durmuş H., Dikici T., Yurddaşkal M.

The International Conference on Materials Science, Machine and Automotive Engineerings and Technology, İzmir, Türkiye, 10 - 12 Nisan 2018, ss.491, (Özet Bildiri)

22. Effect of annealing temperature on the microstructure and mechanical properties of anodic oxide thin film formed on Ti6Al4V

DİKİCİ T.

2.International Conference on Material Science and Technology in Cappadocia (IMSTEC 2017), Nevşehir, Türkiye, 11 - 13 Ekim 2017, ss.490-492, (Tam Metin Bildiri)

23. Formation of TiO2 Nanotube Layers Through Magnetron Sputtering and Electrochemical Anodization

BAŞALAN E., EROL M., SANCAKOĞLU O., DİKİCİ T., YAVAŞ A., ÇELİK E.

3 rd International Porous and Powder Materials Symposium and Exhibition Symposium (PPM2017), 12 - 15 Eylül 2017, (Özet Bildiri)

24. Photocatalytic Performance of The Iodine Doped Hollow And Mesoporous Hematite (Fe2O3) Structure Synthesized Via Sol-Gel Process

DEMİRCİ S., YURDDAŞKAL M., DİKİCİ T., SARIOĞLU C.

3 rd International Porous and Powder Materials Symposium and Exhibition Symposium (PPM2017), 12 - 15 Eylül 2017, (Özet Bildiri)

Metrikler

Yayın

Yayın (WoS)

Yayın (Scopus)

Atıf (WoS)

733

H-İndeks (WoS)

Atıf (Scopus)

775

H-İndeks (Scopus)

Atıf (Scholar)

777

H-İndeks (Scholar)

Atıf (TrDizin)

H-İndeks (TrDizin)

Atıf (Sobiad)

H-İndeks (Sobiad)

Atıf (Diğer Toplam)

Proje

Fikri Mülkiyet

Açık Erişim

BM Sürdürülebilir Kalkınma Amaçları

Yayınlar & Eserler

Yayın

Yayın (WoS)

Yayın (Scopus)

Atıf (WoS)

H-İndeks (WoS)

Atıf (Scopus)

H-İndeks (Scopus)

Atıf (Scholar)

H-İndeks (Scholar)

Atıf (TrDizin)

H-İndeks (TrDizin)

Atıf (Sobiad)

H-İndeks (Sobiad)

Atıf (Diğer Toplam)

Proje

Fikri Mülkiyet

Açık Erişim