Doç. Dr. METİN YURDDAŞKAL

Yayın Ağı

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Production of Zinc Oxide (ZnO) Doped Biodegradable Film and Investigation of Its Photocatalytic/Antimicrobial Properties

Karabaş E., Yurddaşkal M., Bozatlı S. B., Yılmaz T.

JOURNAL OF PHOTOCHEMISTRY AND PHOTOBIOLOGY A: CHEMISTRY , cilt.462, ss.1-11, 2025 (SCI-Expanded)

Enhanced properties of TiO2 nanotubes through α-Fe2O3 surface decoration: Synthesis, characterization, and performance evaluation

Doluel E. C., Kartal U., Uzunbayır B., Erol M., Yurddaşkal M., Pulat G., et al.

CERAMICS INTERNATIONAL , cilt.24, sa.8, ss.1-20, 2024 (SCI-Expanded)

Effects of annealing on the structural and magnetic properties of flame spray pyrolyzed MnFe<sub>2</sub>O<sub>4</sub> nanoparticles

Ozdemir E. T., Yıldırım S., Ozler B., Dikici T., Erol M., Yurddaskal M.

INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY , cilt.20, sa.6, ss.3775-3785, 2023 (SCI-Expanded)

The Effect of Geometrical Characteristics of TiO2 Nanotube Arrays on the Photocatalytic Degradation of Organic Pollutants

Kartal U., Uzunbayir B., DOLUEL E. C., YURDDAŞKAL M., EROL M.

JOURNAL OF INORGANIC AND ORGANOMETALLIC POLYMERS AND MATERIALS , 2023 (SCI-Expanded)

Preparation and photocatalytic performances of ZnO nanostructures: Effects of anodization voltage and time

Oksuz A. E., Yurddaşkal M., Doluel E. C., Kartal U., Dikici T.

SURFACE AND INTERFACE ANALYSIS , cilt.55, sa.3, ss.192-200, 2023 (SCI-Expanded)

Production of Zn-doped TiO2 film with enhanced photocatalytic activity

Dikici T., Yılmaz O., Akalın A., Demirci S., Gültekin S., Yıldırım S., et al.

JOURNAL OF THE AUSTRALIAN CERAMIC SOCIETY , cilt.58, ss.1415-1421, 2022 (SCI-Expanded) Sürdürülebilir Kalkınma

ZnO nanostructures for photocatalytic degradation of methylene blue: Effect of different anodization parameters

Oksuz A. E., Yurddaskal M., Kartal U., Dikici T., Erol M.

JOURNAL OF THE KOREAN CERAMIC SOCIETY , cilt.59, ss.859-868, 2022 (SCI-Expanded)

Energy harvesting nanogenerators: Electrospun beta-PVDF nanofibers accompanying ZnO NPs and ZnO@Ag NPs

ZEYREK ONGUN M., OĞUZLAR S., Kartal U., YURDDAŞKAL M., CİHANBEĞENDİ Ö.

SOLID STATE SCIENCES , cilt.122, 2021 (SCI-Expanded) Sürdürülebilir Kalkınma

A comparative study on structural, morphological and photocatalytic properties of anodically grown ZnO nanowires under varying parameters

Ozdemir E. T., Kartal U., DİKİCİ T., EROL M., YURDDAŞKAL M.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS , cilt.32, sa.23, ss.27398-27408, 2021 (SCI-Expanded) Sürdürülebilir Kalkınma

Photocatalytic activity of the thermally oxidized Zn-Ni-, Zn-Co-, Ni-Co-, and Zn-Ni-Co-coated alloy films

DEMİRCİ S., DİKİCİ T., YURDDAŞKAL M.

JOURNAL OF THE AUSTRALIAN CERAMIC SOCIETY , cilt.57, sa.5, ss.1531-1539, 2021 (SCI-Expanded)

Investigation of graphene-based Schottky junction solar cell with heavy-doped silicon

Jehad A. K., Yurddaşkal M., Güneş F., Zafer C., Kocabaş K.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS , cilt.32, sa.24, ss.28856-28869, 2021 (SCI-Expanded)

Effects of Graphene Oxide Doping on Magnetic and Structural Properties of Bi1.6Pb0.4Sr2Ca2Cu3Oy Superconductor

BİLGİLİ Ö., YURDDAŞKAL M.

JOURNAL OF ELECTRONIC MATERIALS , cilt.50, sa.8, ss.4999-5006, 2021 (SCI-Expanded)

Development of alpha-Fe2O3/TiO2 3D hierarchical nanostructured photocatalysts through electrochemical anodization and sol-gel methods

Uzunbayir B., Kartal U., DOLUEL E. C., YURDDAŞKAL M., EROL M.

JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY , cilt.96, sa.2, ss.441-451, 2020 (SCI-Expanded)

Effect of Ag Content on Photocatalytic Activity of Ag@TiO2/rGO Hybrid Photocatalysts

DOLUEL E. C., Kartal U., DİKİCİ T., YURDDAŞKAL M.

JOURNAL OF ELECTRONIC MATERIALS , cilt.49, sa.6, ss.3849-3859, 2020 (SCI-Expanded) Sürdürülebilir Kalkınma

A comparative study for producing few-layer graphene sheets via electrochemical and microwave-assisted exfoliation from graphite powder

Jehad A. K., KOCABAŞ K., YURDDAŞKAL M.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS , cilt.31, sa.9, ss.7022-7034, 2020 (SCI-Expanded)

Enhancement of piezoelectric energy-harvesting capacity of electrospun beta-PVDF nanogenerators by adding GO and rGO

ZEYREK ONGUN M., OĞUZLAR S., DOLUEL E. C., Kartal U., YURDDAŞKAL M.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS , cilt.31, sa.3, ss.1960-1968, 2020 (SCI-Expanded)

Formation of Micro- and Nanostructured TiO2 Films by Anodic Oxidation for Enhanced Photocatalytic Activities

Yurddaşkal M.

JOURNAL OF INORGANIC AND ORGANOMETALLIC POLYMERS AND MATERIALS , cilt.29, sa.6, ss.2214-2225, 2019 (SCI-Expanded) Sürdürülebilir Kalkınma

Wear performance of Fe-Cr-C-B hardfacing coatings: Dry sand/rubber wheel test and ball-on-disc test

Durmuş H., Comez N., Gül C., Yurddaşkal M., Yurddaşkal M.

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS , cilt.77, ss.37-43, 2018 (SCI-Expanded)

Graphene and carbon black filled conductive nanocomposite films for heating element applications

YURDDAŞKAL M., DOLUEL E. C., Kartal U., Koksalar A., Celik E.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS , cilt.29, sa.22, ss.19005-19012, 2018 (SCI-Expanded) Sürdürülebilir Kalkınma

Influence of growth parameters on the properties of TiO2 films prepared by anodic spark oxidation method and photocatalytic degradation of methylene blue

Dikici T., Yurddaşkal M., Yıldırım S., Celik E.

JOURNAL OF THE AUSTRALIAN CERAMIC SOCIETY , cilt.54, sa.3, ss.451-458, 2018 (SCI-Expanded)

Quenching and tempering of 51CrV4 (SAE-AISI 6150) steel via medium and low frequency induction

Çivi C., Yurddaşkal M., Atik E., Celik E.

MATERIALS TESTING , cilt.60, sa.6, ss.614-618, 2018 (SCI-Expanded) Sürdürülebilir Kalkınma

Fabrication and characterization of novel iodine doped hollow and mesoporous hematite (Fe2O3) particles derived from sol-gel method and their photocatalytic performances

Demirci S., Yurddaşkal M., Dikici T., Sanoglu C.

JOURNAL OF HAZARDOUS MATERIALS , cilt.345, ss.27-37, 2018 (SCI-Expanded)

Synergetic effect of antimony trioxide on the flame retardant and mechanical properties of polymer composites for consumer electronics applications

Yurddaşkal M., Nil M., Öztürk Y., Celik E.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS , cilt.29, sa.6, ss.4557-4563, 2018 (SCI-Expanded)

Effect of halogen-free nanoparticles on the mechanical, structural, thermal and flame retardant properties of polymer matrix composite

Yurddaşkal M., Celik E.

COMPOSITE STRUCTURES , cilt.183, ss.381-388, 2018 (SCI-Expanded)

Production, characterization and optimization of thermoelectric module and investigation of doping effects on thermoelectric performances

Baday C., Yurddaşkal M., Özgül M., Zor M., Celik E.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS , cilt.28, sa.23, ss.17468-17481, 2017 (SCI-Expanded) Sürdürülebilir Kalkınma

The effects of growth conditions on the surface properties and photocatalytic activities of anatase TiO2 films prepared via electrochemical anodizing and annealing methods

Dikici T., Yurddaşkal M., Demirci S., Celik E.

JOURNAL OF POROUS MATERIALS , cilt.24, sa.6, ss.1535-1544, 2017 (SCI-Expanded)

Sol-gel synthesis, characterization, and photoluminescence properties of sub-micron Gd2O2SO4 powders

Aritman İ., Yıldırım S., Ebeoğlugil M. F., Yurddaşkal M., Ertekin K., Celik E.

JOURNAL OF THE AUSTRALIAN CERAMIC SOCIETY , cilt.53, sa.2, ss.457-463, 2017 (SCI-Expanded)

Carbon black and graphite filled conducting nanocomposite films for temperature sensor applications

Yurddaşkal M., Erol M., Celik E.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS , cilt.28, sa.13, ss.9514-9518, 2017 (SCI-Expanded)

Synthesis and Characterization of Gd2O2SO4.Pr3+ Scintillation Material Produced by Sol-Gel Process for Digital Imaging System

Aritman I., Yıldırım S., Kisa A., Guleryuz L. F., Yurddaşkal M., Dikici T., et al.

ACTA PHYSICA POLONICA A , cilt.131, sa.1, ss.106-108, 2017 (SCI-Expanded)

Synthesis and characterization of Ag doped TiO2 heterojunction films and their photocatalytic performances

Demirci S., Dikici T., Yurddaşkal M., Gultekin S., Toparli M., Celik E.

APPLIED SURFACE SCIENCE , cilt.390, ss.591-601, 2016 (SCI-Expanded)

Effect of annealing temperature on the surface properties and photocatalytic efficiencies of Cu2O/CuO structures obtained by thermal oxidation of Cu layer on titanium substrates

Yurddaşkal M., Dikici T., Celik E.

CERAMICS INTERNATIONAL , cilt.42, sa.15, ss.17749-17753, 2016 (SCI-Expanded)

Structural and luminescence properties of undoped, Nd3+ and Er3+ doped TiO2 nanoparticles synthesized by flame spray pyrolysis method

Yıldırım S., Yurddaşkal M., Dikici T., Aritman İ., Ertekin K., Celik E.

CERAMICS INTERNATIONAL , cilt.42, sa.9, ss.10579-10586, 2016 (SCI-Expanded)

Fabrication and characterization of nanostructured anatase TiO2 films prepared by electrochemical anodization and their photocatalytic properties

Yurddaşkal M., Dikici T., Yıldırım S., Yurddaşkal M., Toparli M., Celik E.

JOURNAL OF ALLOYS AND COMPOUNDS , cilt.651, ss.59-71, 2015 (SCI-Expanded)

A comparative study on the photocatalytic activities of microporous and nanoporous TiO2 layers prepared by electrochemical anodization

Dikici T., Yıldırım S., Yurddaşkal M., Erol M., Yigit R., Toparli M., et al.

SURFACE & COATINGS TECHNOLOGY , cilt.263, ss.1-7, 2015 (SCI-Expanded)

A Comparison on Physical, Structural, and Photocatalytical Properties of TiO2 Nanopowders Produced Using Sol-Gel and Flame Spray Pyrolysis

Erol M., Sancakoğlu O., Yurddaşkal M., Yıldırım S., Celik E.

INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY , cilt.10, sa.6, ss.931-938, 2013 (SCI-Expanded)

Diğer Dergilerde Yayınlanan Makaleler

Electrodeposited ZnO Nanostructures on ITO Surfaces: Exploring Their Efficacy for Cholesterol Biosensing Applications

EROL M., AYKAÇ A., DİKİCİ T., YURDDAŞKAL M., KARTAL U., Uzunbayır B., et al.

Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi , cilt.26, 2024 (Hakemli Dergi) Sürdürülebilir Kalkınma

Production of Titanium Dioxide/Reduced Graphene Oxide Composites and Investigation of Their Photocatalytic Properties

YURDDAŞKAL M., Kartal U., DOLUEL E. C.

JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI , cilt.23, sa.1, ss.249-255, 2020 (ESCI)

Nanoyapılı TiO2 film yüzeyinde TiO2/ZnO ve TiO2/CuO heteroyapıların oluşturulması ve fotokatalitik aktivitelerinin incelenmesi

DİKİCİ T., YURDDAŞKAL M.

Erzincan Üniversitesi Fen Bilimleri Enstitüsü Dergisi , cilt.12, sa.1, ss.63-73, 2019 (Hakemli Dergi)

Anodik spark oksitleme tekniği ile üretilen titanyum dioksit (TiO2) kaplamaların karakterizasyonu ve fotokatalitik özellikleri

DİKİCİ T., YURDDAŞKAL M.

Balıkesir Üniversitesi Fen Bilimleri Enstitüsü Dergisi , cilt.20, sa.1, ss.83-93, 2018 (Hakemli Dergi)

Effects of Zn-doping on the photocatalytic activity and microstructures of nanocrystalline SnO2 powders

Yurddaşkal M., Yıldırım S., Dikici T., Yurddaskal M., Erol M., Aritman İ., et al.

Journal of the Turkish Chemical Society, Section A: Chemistry , cilt.5, ss.9-14, 2018 (Scopus)

Enhanced photocatalytic properties of Sn-doped ZnO nanoparticles by flame spray pyrolysis under UV light irradiation

Yurddaşkal M., Yıldırım S., Dikici T., Yurddaskal M., Erol M., Aritman İ., et al.

Journal of the Turkish Chemical Society, Section A: Chemistry , cilt.5, ss.15-22, 2018 (Scopus)

Effect of annealing temperatures on the crystallization and photocatalytic activity of micro-nanoporous TiO2 films produced by electrochemical anodization

Yurddaskal M., YURDDAŞKAL M., DİKİCİ T., Durmus H.

Journal of the Turkish Chemical Society, Section A: Chemistry , cilt.5, ss.85-92, 2018 (Scopus)

Soğuk metal transfer kaynağı ile birleştirilmiş AA6061-galvanizli çelik sacların karakterizasyonu

DURMUŞ H., ÇÖMEZ N., YURDDAŞKAL M.

Dicle Üniversitesi Mühendislik Fakültesi Mühendislik Dergisi , cilt.8, sa.4, ss.835-844, 2017 (Hakemli Dergi)

Preparation and Characterization of TiO2 Nanofluid by Sol-gel Method for Cutting Tools

Birlik I., Ak Azem N. F., Yiğit R., Erol M., Yıldırım S., Yurddaşkal M., et al.

Afyon Kocatepe Üniversitesi Fen ve Mühendislik Bilimleri Dergisi , cilt.14, ss.453-460, 2014 (Hakemli Dergi)

Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler

Improvement of electromagnetic shielding properties of glass fiber reinforced epoxy composites

Yılmaz M., Yurddaşkal M.

6. INTERNATIONAL MEDITERRANEAN CONGRESS, Rome, İtalya, 13 - 15 Ağustos 2024, ss.336-337

Investigation of the effect of voltage on the surface morphologies of Al2O3 structures produced by anodic oxdiation method

Balkan S., Yurddaşkal M., Dikici T.

III. International Cankaya Scientific Studies Congress, 28 - 29 Şubat 2024, ss.557-558

Heavy doped semiconductor in graphene Schottky junction solar cell

Jehad A., KOCABAŞ K., YURDDAŞKAL M., GÜNEŞ F.

Türk Fizik Derneği 37. Uluslararası Fizik Kongresi, Türkiye, 1 - 05 Eylül 2021

Graphene-based Schottky junction with highly doped semiconductor

Jehad A., Kocabaş K., Yurddaşkal M., Güneş F.

5th International Students Science Congress, İzmir, Türkiye, 21 - 22 Mayıs 2021, ss.71

Effect of different voltages on the morphological and structural properties of ZnO nanowires

Öksüz A. E., Yurddaşkal M., Dikici T.

4. INTERNATIONAL CONFERENCE ON MATERIALS SCIENCE, MECHANICAL AND AUTOMOTIVE ENGINEERINGS AND TECHNOLOGY, Nevşehir, Türkiye, 28 - 30 Mayıs 2021, ss.272

The effect of different ohmic back contacts in graphene/silicon Schottky junction solar cell

Jehad A., Kocabaş K., Yurddaşkal M., Güneş F.

4th International Conference on Physical Chemistry & Functional Materials, Elazığ, Türkiye, 8 - 09 Nisan 2021, ss.137

Production and application of CVD graphene in solar cells

Jehad A., KOCABAŞ K., YURDDAŞKAL M.

6. Uluslararası Öğrenci Sempozyumu, 5 - 06 Aralık 2020

Investigation in graphene/silicon-based Schottky junction solar cell

Jehad A., KOCABAŞ K., YURDDAŞKAL M.

4th International Students Science Congress, 18 - 19 Eylül 2020

Synthesis of graphene nanolayers from graphite with microwave-assisted liquid phase exfoliation method

DOLUEL E. C., YURDDAŞKAL M., Kartal U.

5th International Engineering and Natural Sciences Conference 2020, 5 - 06 Kasım 2020

Production of multifunctional new generation fabrics with the ability to reflect ultraviolet and infrared rays by physical vapor deposition method

Kartal U., YURDDAŞKAL M., DOLUEL E. C.

5th International Engineering and Natural Sciences Conference 2020, 5 - 06 Kasım 2020

Producing the graphene/p-silicon Schottky junction solar cell and investigation the effect of multi-layer graphene in this cell

Jehad A., KOCABAŞ K., YURDDAŞKAL M.

Türk Fizik Derneği 36.Uluslararasi Fizik Kongresi, 1 - 05 Eylül 2020

Fabrication of graphene/Si Schottky junction solar cell

Jehad A., KOCABAŞ K., YURDDAŞKAL M.

2020 Express conference on the physics of materials and their applications in energy harvesting, 17 - 19 Ağustos 2020

A feasible technique to prepare few-layered graphene sheets from pencil lead graphite

Jehad A., KOCABAŞ K., YURDDAŞKAL M.

V. Uluslararası Öğrenci Sempozyumu, Edirne, Türkiye, 6 - 08 Aralık 2019

Development of visible light active Fe2O3/TiO2 nanostructured photocatalysts

Uzunbayır B., Doluel E. C., Kartal U., YURDDAŞKAL M., EROL M.

8th International Conference on Advanced Technologies, 26 - 30 Ağustos 2019

Anotlama parametrelerinin Ti6Al4V alaşımı üzerinde oluşturulan TiO2 nanoyapıların yüzey özelliklerine etkisi

YURDDAŞKAL M.

3rd International Students Science Congress, İzmir, Türkiye, 3 - 04 Mayıs 2019

Preparation and characterization of graphene synthesized by different methods

Jehad A., YURDDAŞKAL M., KOCABAŞ K.

3rd International Students Science Congress, İzmir, Türkiye, 3 - 04 Mayıs 2019

Investigation of the surface characteristics and photocatalytic properties of TiO2 layers by anodic oxidation

ARİTMAN İ., YURDDAŞKAL M.

2nd International Eurasian Conference onBiological and Chemical Sciences(EurasianBioChem 2019), 28 - 29 Haziran 2019

A Practical Method to Synthesis Few-Layered Graphene Sheets via Electrochemical with Microwave Assisted Exfoliation

Jehad A. K., KOCABAŞ K., YURDDAŞKAL M.

35th International Physics Congress of the Turkish-Physical-Society (TPS), Bodrum, Türkiye, 4 - 08 Eylül 2019, cilt.2178

Effect of annealing temperatures on the crystallization and photocatalytic activity of micro-nanoporous TiO2 films produced by electrochemical anodization

YURDDAŞKAL M., YURDDAŞKAL M., DİKİCİ T., DURMUŞ H.

3 rd International Porous and Powder Materials Symposium and Exhibition Symposium (PPM2017), Aydın, Türkiye, 12 - 15 Eylül 2017

Development of the electrical conductivity in carbon based polymer composites

YURDDAŞKAL M., EROL M., ÇELİK E.

International Advanced Researches Engineering Congress-2017, Türkiye, 16 - 18 Kasım 2017, cilt.4, ss.77-83

Finite element simulation of the substrate effects on the mechanical performance of YBCO-based superconductor thin films

YAĞCI T., YURDDAŞKAL M., ÇULHA O.

4th International Conference on Engineering and Natural Sciences, 2 - 06 Mayıs 2018

Production and characterization of PMMA/TiO2 composite thin films for dielectric applications

GÜLTEKİN S., Yılmaz O., DİKİCİ T., YURDDAŞKAL M., ÇELİK E.

4th International Conference on Engineering and Natural Sciences, 2 - 06 Mayıs 2018

Investigation of the substrate effects on the mechanical performance of YBCO coating produced by vacuum evaporation technique

YAĞCI T., YURDDAŞKAL M., ÇULHA O.

4th International Conference on Engineering and Natural Sciences, 2 - 06 Mayıs 2018

Comparison of exfoliated graphene synthesized by mechanical and sonic methods

YURDDAŞKAL M., Kartal U., Doluel E. C., ÇELİK E.

2nd International Students Science Congress, 4 - 05 Mayıs 2018

Production and development of graphene and carbon black filled conductive nanocomposites

Kartal U., Doluel E. C., YURDDAŞKAL M., ÇELİK E.

The Internatinonal Conference on Materials Science Mechanical and Automation Engineerings and Technology, 10 - 12 Nisan 2018

Synergic effect of graphene flake on the heat releasing properties of carbon based polymer composites

Doluel E. C., Kartal U., YURDDAŞKAL M., ÇELİK E.

The Internatinonal Conference on Materials Science Mechanical and Automation Engineerings and Technology, 10 - 12 Nisan 2018

The effect of acid etching temperature on the surface properties of Ti6Al4V

YURDDAŞKAL M., DURMUŞ H., DİKİCİ T., YURDDAŞKAL M.

The Internatinonal Conference on Materials Science, Mechanical and Automotive Engineerings and Technology, 10 - 12 Nisan 2018

Electrical behavior and positive temperature coefficient effect of carbon black and graphite filled conductive polymer composites

YURDDAŞKAL M., EROL M., ÇELİK E.

International Advanced Researches Engineering Congress-2017, Osmaniye, Türkiye, 16 - 18 Kasım 2017

Synergistic effect of antimony trioxide nanoparticles on the structural, thermal and flame retardant properties of polypropylene

YURDDAŞKAL M., ÇELİK E.

3rd International Porous and Powder Materials Symposium and Exhibiton, 12 - 15 Eylül 2017

Microstructure and photocatalytic properties of Zn-Ni alloy coatings produced by electrodeposition process

YURDDAŞKAL M., ÇELİK E.

3rd International Porous and Powder Materials Symposium and Exhibition, 12 - 15 Eylül 2017

The effect of Cr/C ratio on the wear resistance of hardfacing coatings

Yılmaz S., DURMUŞ H., ÇÖMEZ N., YURDDAŞKAL M., YURDDAŞKAL M.

2nd International Science Symposium (ISS 2017), Tiflis, Gürcistan, 5 - 08 Eylül 2017

Photocatalytic Performance of The Iodine Doped Hollow And Mesoporous Hematite (Fe2O3) Structure Synthesized Via Sol-Gel Process

DEMİRCİ S., YURDDAŞKAL M., DİKİCİ T., SARIOĞLU C.

3 rd International Porous and Powder Materials Symposium and Exhibition Symposium (PPM2017), 12 - 15 Eylül 2017

Effects of Zn-doping on the photocatalytic activity and microstructures of nanocrystalline SnO2 powders

Yurddaşkal M., Yıldırım S., Dikici T., Yurddaşkal M., Erol M., Aritman İ., et al.

The 3rd International Porous and Powder Materials Symposium and Exhibition, Aydın, Türkiye, 12 - 15 Eylül 2017, ss.120-123

Enhanced Photocatalytic Properties of Sn-Doped ZnO Nanoparticles by Flame Spray Pyrolysis under UV Light Irradiatıon

Yurddaşkal M., Yıldırım S., Dikici T., Yurddaşkal M., Erol M., Aritman İ., et al.

The International Porous and Powder Materials Symposium and Exhibition-2017, Aydın, Türkiye, 12 - 15 Eylül 2017

Fabrication and Characterization of Gd2O2SO4:Tb3+ Phosphors by Sol-gel Method

Aritman I., Yıldırım S., Kisa A., Guleryuz L. F., Yurddaşkal M., Dikici T., et al.

6th Congress and Exhibition on International Advances in Applied Physics and Materials Science (APMAS), İstanbul, Türkiye, 1 - 03 Haziran 2016, cilt.1809

Production and Characterization of Magnetic and Luminescent Gd2O2SO4:Eu3+ Nanoparticles by Sol-gel Technique

Aritman I., Yıldırım S., Kisa A., Guleryuz L. F., Yurddaşkal M., Dikici T., et al.

6th Congress and Exhibition on International Advances in Applied Physics and Materials Science (APMAS), İstanbul, Türkiye, 1 - 03 Haziran 2016, cilt.1809

Effect of halogen free nanoparticles on the mechanical structural thermal and flame retardant properties of polymer matrix composite

YURDDAŞKAL M., ÇELİK E.

19th International Conference on Composite Strucures, Porto, Portekiz, 5 - 08 Eylül 2016

Synthesis and characterization of Gd2O2SO4 Pr3 scintillation material produced by sol gel process for digital imaging system

Aritman İ., Yıldırım S., Kısa A., Güleryüz L. F., Yurddaşkal M., Dikici T., et al.

6th International Advances in Applied Physics and Materials Science Congress Exhibition, İstanbul, Türkiye, 1 - 03 Haziran 2016

Effect of anodizing voltage on the photocatalytic activities of nanoporous TiO2 structures

DİKİCİ T., YURDDAŞKAL M., TOPARLI M.

Cracow Symposium on Physics and Chemistry of Materials (CSPCM 2016), Cracow, Polonya, 06 Mayıs 2016

Seramik katkılı alev geciktirici polimerik nanokompozit malzemelerin üretilmesi karakterizasyonu ve endüstriyel uygulaması

Yurddaşkal M., Yıldırım S., Yılmaz S., Turhan A., Çelik E.

IX. Uluslararası Katılımlı Seramik Kongresi, Afyonkarahisar, Türkiye, 26 - 28 Kasım 2015, ss.79

PRODUCTION OF CARBON BASED NANOCOMPOSITE COATINGS AND INVESTIGATION OF THE USAGE OF TEMPERATURE SENSOR

YURDDAŞKAL M., Erol M., Celik E.

International Conference on Production Research - Regional Conference Africa, Europe and the Middle East (ICPR-AEM) / 3rd International Conference on Quality and Innovation in Engineering and Management (QIEM), Cluj-Napoca, Romanya, 1 - 05 Temmuz 2014, ss.532-535