Prof. Dr. YUSUF ARMAN

Yayın Ağı

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Investigation failure behaviours of notched composite plates repaired with using adhesive and patch

Çelik A., Turan K., ARMAN Y.

Mechanics of Advanced Materials and Structures , 2024 (SCI-Expanded)

Investigation of patch application failure behaviors according to fiber orientation difference at notched composite plates

Celik A., Turan K., ARMAN Y.

Mechanics of Advanced Materials and Structures , 2024 (SCI-Expanded)

Effect of impactor nose form on the impact behavior of reinforced composite materials

Dogan S., ARMAN Y., DOĞAN A.

MATERIALS TESTING , cilt.65, sa.8, ss.1254-1262, 2023 (SCI-Expanded)

Investigation of effective coating of the Ti-6Al-4V alloy and 316L stainless steel with graphene or carbon nanotubes with finite element methods

TÜMER D., Gungorurler M., HAVITÇIOĞLU H., ARMAN Y.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T , cilt.9, sa.6, ss.15880-15893, 2020 (SCI-Expanded)

Experimental study on spall behavior of single and multi-plate composites behind armor subjected to shaped charge

Toksoy A. K., ARIKAN V., KARAKUZU R., ARMAN Y., GÖREN A.

JOURNAL OF COMPOSITE MATERIALS , cilt.54, sa.24, ss.3491-3499, 2020 (SCI-Expanded)

The effect of hygrothermal aging and UV radiation on the low-velocity impact behavior of the glass fiber-reinforced epoxy composites

Dogan A., ARMAN Y.

IRANIAN POLYMER JOURNAL , cilt.28, sa.3, ss.193-201, 2019 (SCI-Expanded)

Experimental investigation of transverse loading on composite panels coated with different gelcoat colors subjected to UV radiation and hygrothermal aging

Dogan A., ARMAN Y., ÖZDEMİR O.

MATERIALS RESEARCH EXPRESS , cilt.6, sa.2, 2019 (SCI-Expanded)

Effects of temperature and impactor nose diameter on the impact behavior of PA6 and PP thermoplastic composites

Dogan A., ARMAN Y.

JOURNAL OF ELASTOMERS AND PLASTICS , cilt.51, sa.1, ss.64-74, 2019 (SCI-Expanded)

The effect of delamination size and location to buckling behavior of composite materials

Ipek G., ARMAN Y., Celik A.

COMPOSITES PART B-ENGINEERING , cilt.155, ss.69-76, 2018 (SCI-Expanded)

The Effect of Hygrothermal Aging on the Glass and Carbon Reinforced Epoxy Composites for Different Stacking Sequences

Dogan A., ARMAN Y.

MECHANIKA , cilt.24, sa.1, ss.19-25, 2018 (SCI-Expanded)

Numerical investigation of residual stresses in high temperature ZrO2 insulation coatings on Ag tape substrate for magnet technologies

ARMAN Y., ÖZGÜL M., Celik E.

JOURNAL OF THE AUSTRALIAN CERAMIC SOCIETY , cilt.53, sa.2, ss.855-861, 2017 (SCI-Expanded)

An experimental and numerical investigation on low velocity impact behavior of composite plates

Berk B., KARAKUZU R., Icten B. M., Arikan V., ARMAN Y., Atas C., et al.

JOURNAL OF COMPOSITE MATERIALS , cilt.50, sa.25, ss.3551-3559, 2016 (SCI-Expanded)

The effects of repeated transverse impact load on the burst pressure of composite pressure vessel

Demir I., Sayman O., Dogan A., Arikan V., ARMAN Y.

COMPOSITES PART B-ENGINEERING , cilt.68, ss.121-125, 2015 (SCI-Expanded)

Effect of interface crack on lateral buckling behavior and free vibration response of a sandwich composite beam

TOYGAR E. M., KIRAL Z., Sayman O., ARMAN Y., Ozen M.

JOURNAL OF COMPOSITE MATERIALS , cilt.47, sa.15, ss.1843-1851, 2013 (SCI-Expanded)

EFFECT OF WASHER TYPE ON BEARING STRENGTH OF BOLTED-JOINT LAMINATED COMPOSITES

ARMAN Y.

ADVANCED COMPOSITES LETTERS , cilt.21, sa.6, ss.145-151, 2012 (SCI-Expanded)

THE EFFECT OF STACKING SEQUENCE AND TEMPERATURE ON THE MECHANICAL AND LOW VELOCITY IMPACT RESPONSE OF GLASS/EPDXY LAMINATES

Benli S., Sayman O., ARMAN Y.

ADVANCED COMPOSITES LETTERS , cilt.19, sa.4, ss.146-154, 2010 (SCI-Expanded)

The effect of stacking sequence and temperature on the mechanical and low velocity impact response of glass/epoxy laminates

Benli S., Sayman O., ARMAN Y.

Advanced Composites Letters , cilt.19, sa.4, ss.146-154, 2010 (SCI-Expanded)

Elastic-plastic finite elements analysis of transient and residual stresses in ceramo-metal restorations

ARMAN Y., ZOR M., GÜNGÖR M. A., Akan E., Aksoy S.

JOURNAL OF BIOMECHANICS , cilt.42, sa.13, ss.2104-2110, 2009 (SCI-Expanded)

Evaluating the bond strength of opaque material on porcelain fused to metal restorations (PFM) alloys by scratch test method

Culha O., Zor M., GÜNGÖR M. A., ARMAN Y., Toparli M.

MATERIALS & DESIGN , cilt.30, sa.8, ss.3225-3228, 2009 (SCI-Expanded)

Compression-after impact behavior of laminated composite plates subjected to low velocity impact in high temperatures

AKTAŞ M., KARAKUZU R., ARMAN Y.

COMPOSITE STRUCTURES , cilt.89, sa.1, ss.77-82, 2009 (SCI-Expanded)

Thermal stress analysis of Wc-Co/Cr-Ni multilayer coatings on 316L steel substrate during cooling process

Sayman O., Sen F., Celik E., ARMAN Y.

MATERIALS & DESIGN , cilt.30, sa.3, ss.770-774, 2009 (SCI-Expanded)

Hole effects on lateral buckling of laminated cantilever beams

Eryigit E., ZOR M., ARMAN Y.

COMPOSITES PART B-ENGINEERING , cilt.40, sa.2, ss.174-179, 2009 (SCI-Expanded)

The effect on residual stresses of porosity and surface roughness in high temperature insulation coatings on Ag tape for magnet technologies

ARMAN Y., Sayman O., Celik E., Aksoy S., Hascicek Y. S.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY , cilt.206, ss.241-248, 2008 (SCI-Expanded)

Investigation of the influence on residual stresses of porosity in high temperature ZrO2 coatings on Ag tape for magnet technologies

ARMAN Y., Aktas M., Celik E., Mutlu I. H., Sayman O.

MATERIALS & DESIGN , cilt.28, sa.9, ss.2544-2548, 2007 (SCI-Expanded)

Determination of critical delamination diameter of laminated composite plates under buckling loads

ARMAN Y., Zor M., Aksoy S.

COMPOSITES SCIENCE AND TECHNOLOGY , cilt.66, sa.15, ss.2945-2953, 2006 (SCI-Expanded)

Thermal stresses in a thermoplastic composite disc under a steady state temperature distribution

Sayman O., ARMAN Y.

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES , cilt.25, sa.16, ss.1709-1722, 2006 (SCI-Expanded)

Diğer Dergilerde Yayınlanan Makaleler

Effect of fiber orientation and loading direction on the compressive response of E-glass/Epoxy laminated composites used in modern helicopter blades submitted to high strain rate

Çelik A., ARMAN Y.

Dicle Üniversitesi Mühendislik Fakültesi Mühendislik Dergisi , cilt.13, sa.4, ss.693-700, 2022 (Hakemli Dergi)

İnsan Bacak Hareketleri İçin Prototip Dış iskelet Robotik Sisteminin Mekanik Tasarımı ve Hareket Verilerinin Yapay Sinir Ağları ile Elde Edilmesi

ÖZKURT A., TOYGAR E. M., ŞENOL Y., OLCAY T., KIRAL Z., ARMAN Y., et al.

Sakarya Üniversitesi Fen Bilimleri Enstitüsü Dergisi , cilt.16, sa.3, ss.234-248, 2012 (Hakemli Dergi)

Failure load of composite single-lap bolting joint under traction force and bending moment

Ghanbari E., Sayman O., Ozen M., ARMAN Y.

Australian Journal of Basic and Applied Sciences , cilt.6, sa.9, ss.683-692, 2012 (Scopus)

İnsan Bacak Hareketleri İçin Prototip Dış İskelet Robotik Sisteminin Mekanik Tasarımı ve Hareket Verilerinin Yapay Sinir Ağları İle Elde Edilmesi

Toygar E. M., Özkurt A., Kıral Z., Çakmakçı M., Gören Kıral B., Şenol Y., et al.

Sakarya Üniversitesi Fen Bilimleri Enstitüsü Dergisi , cilt.16, sa.3, ss.234-248, 2012 (Hakemli Dergi)

İnsan Bacak Hareketleri İçin Prototip Dış İskelet Robotik Sisteminin Mekanik Tasarımı Ve Hareket Verilerinin Yapay Sinir Ağları İle Elde Edilmesi

Toygar E. M., Özkurt A., Kıral Z., Çakmakçı M., Gören Kıral B., Şenol Y., et al.

SAKARYA UNIVERSITY JOURNAL OF SCIENCE , cilt.16, sa.3, ss.234-248, 2012 (Hakemli Dergi)

Dental Porselen Pişirme Fırınlarında Eşdeğer Taşınım Katsayısının Belirlenmesi

ARMAN Y., AKSOY S.

Machinery MakinaTek , cilt.127, ss.136-140, 2008 (Hakemsiz Dergi)

Elastic Plastic Stress Analysis of Symmetric Reinforced Thermoplastic Matrix Laminated Beams under a Bending Moment

ÇALLIOĞLU H., AKSOY S., TOPÇU M., ARMAN Y.

International Journal of Applied Mechanics and Engineering , cilt.8, sa.4, ss.559-575, 2003 (Scopus)

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

Kenarlarindan Basit Mesnetlendirilmiş Tabakali Kompozit Plaklarin Burkulma Yükleri Üzerine Tabakalar ArasindaMeydana Gelen Süreksizlik Bölgesinin Etkisi

ARMAN Y., ŞEN F., ZOR M.

11th International Materials Symposium, Denizli, Türkiye, 19 - 21 Nisan 2006, ss.649-654

Metrikler

Yayın

Atıf (WoS)

363

H-İndeks (WoS)

Atıf (Scopus)

412

H-İndeks (Scopus)

Proje

Tez Danışmanlığı

Açık Erişim

BM Sürdürülebilir Kalkınma Amaçları

Yayınlar & Eserler

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Diğer Dergilerde Yayınlanan Makaleler

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

Metrikler

Yayın

Atıf (WoS)

H-İndeks (WoS)

Atıf (Scopus)

H-İndeks (Scopus)

Proje

Tez Danışmanlığı

Açık Erişim