UÇTEK Ulusal Çukurova Tekstil Kongresi, Adana, Türkiye, 26 - 28 Eylül 2024, ss.540-548
Son yıllarda sağladıkları üstün özelliklerden dolayı kompozit malzemelerin kullanım alanı artmıştır. Kompozit malzemelerde kullanılan takviye elamanları, yapının mekanik ve dinamik özelliklerini belirleyen ana etmendir. Bu çalışmada öncelikle ultra yüksek molekül ağırlıklı (UHMWPE) ipliklerle tek katlı ve çok katlı dokuma kumaş yapıları üretilerek bazı performans özellikleri test edilmiştir. Daha sonra UHMWPE ve karbon dokuma kumaşlar ile iki farklı hibrit kompozit yapı tasarlanarak vakum infüzyon yöntemi ile üretimleri gerçekleştirilmiştir. Çalışmada hibrit kompozit üretiminde kullanılan tek katlı ve çok katlı UHMWPE dokuma kumaş yapılarının tasarlanan hibrit kompozit malzemelerin performans özelliklerine etkisinin incelenmesi ve karşılaştırılması amaçlanmıştır. UHMWP ve karbon dokuma kumaş takviyeli hibrit kompozit yapıların, mekanik performanslarının belirlenebilmesi için malzeme çekme testi, basma testi, üç nokta eğilme testi ve quasi-statik testi yapılmış ve hibrit kompozit yapıların test sonuçları karşılaştırılmıştır. Çok katlı UHMWPE dokuma kumaş ile üretilen hibrit kompozit yapının genel olarak daha iyi mekanik sonuçlar verdiği gözlenmiştir.
In recent years, the use of composite materials has increased due to the superior properties they provide. The reinforcement elements used in composite materials are the main factor that determines the mechanical and dynamic properties of the structure. In this study, firstly single-layer and multi-layer woven fabric structures were produced with ultra-high molecular weight polyethylene (UHMWPE) yarns and some performance properties were tested. Then, two different hybrid composite structures were designed with UHMWPE and carbon woven fabrics and produced using the vacuum infusion method. The aim of the study is to examine and compare the effects of single-layer and multi-layer UHMWPE woven fabric structures used in hybrid composite production on the performance properties of designed hybrid composite materials. In order to determine the mechanical performances of UHMWPE and carbon woven fabric reinforced hybrid composite structures, tensile test, compression test, three-point bending test and quasi-static test were performed and the test results of the hybrid composite structures were compared. It has been observed that the hybrid composite structure produced with multi-layered UHMWPE woven fabric generally gives better mechanical results.