Publications & Works

Publication Network
Articles 25
All (25)
SCI-E, SSCI, AHCI (17)
SCI-E, SSCI, AHCI, ESCI (19)
ESCI (1)
Scopus (16)
TRDizin (10)
Other Publications (1)

1. An experimental study on the tensile properties of metal-metal and polymer-metal T-joints grooved-bonded with structural adhesive

ÖZTOPRAK N., GENÇER G. M.
International Journal of Adhesion and Adhesives , vol.143, 2025 (SCI-Expanded) identifier

2. Characterization of interface, tensile-shear, and vibration performance of AA2024-T351/PP composite stepped-lap joint

ÖZTOPRAK N., GENÇER G. M., AKDAĞ M.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY , vol.138, no.11, pp.5537-5553, 2025 (SCI-Expanded) identifier identifier

3. Sn/Graphite/Cu reinforced aluminum: An experimental study on fabrication of hybrid surface composite as journal bearing material by friction stir processing

GENÇER G. M.
JOURNAL OF ALLOYS AND COMPOUNDS , vol.1002, 2024 (SCI-Expanded, Scopus) identifier identifier

4. VIBRATION BEHAVIOR OF THERMOPLASTIC COMPOSITE WITH DIFFERENT GLASS FIBER CONTENTS UNDER LOW-TEMPERATURE CONDITIONS

Sen H., AKDAĞ M., GENÇER G. M., ÖZTOPRAK N.
KONYA JOURNAL OF ENGINEERING SCIENCES , vol.12, no.2, 2024 (ESCI) Sustainable Development identifier identifier

5. Investigation of the Effect of Adding Waste Eggshell Particles to a Resin Used for SLA Printing Applications

Yavuz G. A., GÖREN KIRAL B., GENÇER G. M., KIRAL Z.
MECHANICS OF COMPOSITE MATERIALS , vol.60, no.1, pp.103-116, 2024 (SCI-Expanded, Scopus) Sustainable Development identifier identifier

6. Investigation of GFRP/AA7075-T6 Scarf Joint as a Robot Arm for High Natural Frequency and Damping Ratio

GENÇER G. M., ÖZTOPRAK N., AKDAĞ M., ŞEN H.
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING , vol.49, no.2, pp.2027-2044, 2024 (SCI-Expanded) Sustainable Development identifier identifier

7. Investigation of GFRP/AA7075-T6 Scarf Joint as a Robot Arm for High Natural Frequency and Damping Ratio

Gençer G. M., Öztoprak N., Akdağ M., Şen H.
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING , vol.49, pp.2027-2044, 2024 (SCI-Expanded)

8. Evaluation of hot-pressing scarf joints between polyamide 6,6 (PA66) composite and AA5754-H111 under tensile and flexural loading

Gençer G. M., Öztoprak N.
International Journal of Adhesion and Adhesives , vol.127, 2023 (SCI-Expanded, Scopus) identifier identifier

9. IMPROVEMENT OF HEAT AFFECTED ZONE OF GTAWed 5754 ALUMINUM ALLOY WITH FSP

Kahraman F., Gençer G. M., Yolcu C.
Konya mühendislik bilimleri dergisi (Online) , vol.11, no.3, pp.758-769, 2023 (Peer-Reviewed Journal) Creative Commons License identifier identifier

10. Fracture Morphology of Single-Lap Dissimilar Joints Between Thermoplastic Composite and AA5754-H111 with Laser Ablation Surface Pre-Treatment

ÖZTOPRAK N., GENÇER G. M.
Karaelmas Fen ve Mühendislik Dergisi , vol.13, no.1, pp.12-21, 2023 (Peer-Reviewed Journal)

11. Load-bearing capacity of polyamide 6 (PA6) composite to 7075-O aerospace Al-alloy single-lap joints: influence of various laser textured patterns on hot press bonding

ÖZTOPRAK N., GENÇER G. M.
Journal of Adhesion Science and Technology , vol.37, no.22, pp.3277-3295, 2023 (SCI-Expanded, Scopus) identifier identifier

12. A Survey on Post-Weld Modification of Microstructural and Mechanical Properties of GTAWed Aluminum Butt Joints Through FSP and T6 Heat Treatment

Gençer G. M., Yolcu C., Kahraman F.
Mühendis ve Makina , vol.63, no.708, pp.511-524, 2022 (Peer-Reviewed Journal)

13. Effect of elevated test temperature on the tensile strength and failure mechanism of hot-pressed dissimilar joints of laser ablation-treated AA5754-H111 and thermoplastic composite

Öztoprak N., Gençer G. M.
MATERIALPRUEFUNG/MATERIALS TESTING , vol.64, no.8, pp.1192-1201, 2022 (SCI-Expanded, Scopus) identifier identifier

14. An Exoskeleton Hand Design and Manufacturing for Persons Losing Hand Function

Kahraman F., Gençer G. M., Gören A.
İleri Mühendislik Çalışmaları ve Teknolojileri Dergisi , vol.3, no.1, pp.1-12, 2022 (Peer-Reviewed Journal)

15. Multiple Mechanisms Improving The Mechanical Properties Of Surface Metal Matrix Composites Obtained By Friction Stir Processing

Gençer G. M.
Mühendis ve Makina , vol.62, no.705, pp.681-701, 2021 (Peer-Reviewed Journal)

16. Comparison Of The Effects Of Ultrasonic Impact Treatment And Age Hardening On Wear Resistance Of SiCp/A356 Composite

Gençer G. M., Yolcu C., Kahraman F., Belevi M.
Mühendis ve Makina , vol.62, no.705, pp.768-783, 2021 (Peer-Reviewed Journal)

17. Role of enhanced surface grain refinement and hardness improvement induced by the combined effect of friction stir processing and ultrasonic impact treatment on slurry abrasive wear performance of silicon carbide particle reinforced A356 composites

Gençer G. M., Kahraman F., Yolcu C.
MATERIALS RESEARCH EXPRESS , vol.8, no.12, 2021 (SCI-Expanded, Scopus) identifier

18. Effect of the surface nanocrystallization on tribological behavior of the Cu based bimetallic materials (CuPbSn)

Gencer G. M., YOLCU C., KAHRAMAN F., SAKLAKOĞLU N.
MATERIALS RESEARCH EXPRESS , vol.6, no.11, 2019 (SCI-Expanded, Scopus) identifier identifier

19. LOW-TEMPERATURE NITRIDING BEHAVIOR OF COMPRESSIVE DEFORMED AISI 316Ti AUSTENITIC STAINLESS STEELS

KAHRAMAN F., Gencer G. M., Kahraman A. D., YOLCU C., Kahraman H.
SURFACE REVIEW AND LETTERS , vol.26, no.5, 2019 (SCI-Expanded, Scopus) identifier identifier

20. Comparative experimental study on the modification of microstructural and mechanical properties of friction stir welded and gas metal arc welded EN AW-6061 O aluminum alloys by post-weld heat treatment

Gencer G. M., ÖZTOPRAK N., Serindag H. T.
MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK , vol.49, no.9, pp.1059-1067, 2018 (SCI-Expanded, Scopus) identifier identifier

21. Comparative Examination of Microstructure and Mechanical Properties of AA5754 Aluminum Alloy Joined with Cold Metal Transfer (CMT) and Pulsed Cold Metal Transfer (Pulsed CMT) Welding Processes

Kahraman F., Gençer G. M., Yolcu C., Demirer Kahraman A., Dilbaz M. E.
Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi , vol.20, no.59, pp.635-646, 2018 (Peer-Reviewed Journal)

22. Surface nanocrystallization of SAE 1008 steel by single and multipass thread rolling process

Kahraman F., Gencer G. M., Kahraman A. D.
MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK , vol.48, no.7, pp.639-645, 2017 (SCI-Expanded, Scopus) identifier identifier

23. The effects of plasma immersion ion implantation and deposition (PIII&D) process voltages on the morphology, phase formation and E. coli adhesion of Ag coatings obtained on the surface of Ti6Al4V orthopedic implant material in nitrogen plasma

Gencer G. M., Karadeniz S., Lambrecht F. Y., HAVITÇIOĞLU H., ÖZKAL S., BASKIN A. H.
JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , vol.32, no.1, pp.231-241, 2017 (SCI-Expanded, Scopus, TRDizin) Creative Commons License identifier identifier

24. Determination of abrasive wear resistances of Fe-based hardfacing coated wear plates that were used as grinders in cement production in cases where clinker and farin were used as abrasives

Gencer G. M., Owsalou R. G., Karadeniz S.
JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , vol.31, no.3, pp.511-520, 2016 (SCI-Expanded, Scopus, TRDizin) Creative Commons License identifier identifier

25. INVESTIGATION OF WEAR BEHAVIOUR OF PLASMA NITRIDED X40CrMoV5-1 HIGH ALLOY STEEL

KAHRAMAN F., Gencer G. M., Karadeniz S.
JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , vol.28, no.1, pp.7-14, 2013 (SCI-Expanded, Scopus, TRDizin) identifier identifier
Papers Presented at Peer-Reviewed Scientific Conferences 26

1. NUMERICAL INVESTIGATION OF MECHANICAL BEHAVIOR OF ON-VEHICLE CARRIER PART SUBJECTED TO REPEATED SHOCK LOADS

Akkaya M. M., Gençer G. M.
7th INTERNATIONAL CAPPADOCIA SCIENTIFIC RESEARCH CONGRESS, Nevşehir, Turkey, 2 - 04 August 2025, pp.1288-1289, (Summary Text)

2. INVESTIGATION OF MECHANICAL PROPERTIES OF LASER TEXTURED Al6063- PA6 HYBRID BEAMS MANUFACTURED IN SINGLE LAP JOINT CONFIGURATION THROUGH A DESIGNED METAL-POLYMER DIRECT BONDING MACHINE

Yüğrük T., Gençer G. M., Akarsu M.
10th International Aegean Congress on Innovation Technologies & Engineering, İzmir, Turkey, 5 - 07 October 2024, pp.410-412, (Summary Text)

3. INVESTIGATION OF MICROSTRUCTURE AND WEAR BEHAVIOR OF AA1050/CeO2/EGGSHELL HYBRID SURFACE COMPOSITE

Gençer G. M.
12th INTERNATIONAL MARDIN ARTUKLU SCIENTIFIC RESEARCHES CONFERENCE, Mardin, Turkey, 17 - 19 August 2024, pp.71-72, (Summary Text)

4. EVALUATION OF THE EFFECTS OF FRICTION STIR PROCESSING PARAMETERS ON THE MICROSTRUCTURE OF SiC AND CeO2 REINFORCED ALUMINUM HYBRID SURFACE COMPOSITE

Gençer G. M.
6. INTERNATIONAL CAPPADOCIA SCIENTIFIC RESEARCH CONGRESS, Nevşehir, Turkey, 10 - 12 August 2024, pp.737-738, (Summary Text)

5. Modification of The Weld Zone of TIG Welded AA5754-H111 Plates Using The Double Pass Friction Stir Process

Gençer G. M., Kahraman F., Yolcu C.
International Izmir Democracy University Engineering Symposium, İzmir, Turkey, 13 - 18 December 2021, pp.3-4, (Summary Text) Sustainable Development

6. Experimental Study on The Modification of Microstructural and Mechanical Properties of Stir Casted A356+SiCp Plate Via Multipass Friction Stir Processing

Gençer G. M., Yolcu C., Kahraman F.
6. Uluslararası Akademik Araştırmalar Kongresi (ICAR 6), Elazığ, Turkey, 23 - 25 August 2021, pp.144-145, (Summary Text)

7. Investigation of the Microstructures and Mechanical Properties of Thin 5083 Aluminum Alloy Plates Welded by Double Pulse Gmaw Method

Gençer G. M., Kahraman F., Yolcu C., Demirer Kahraman A., Demircioğlu A.
International Academic Conference on Applied Research in Engineering, Science & Technology (ICAREST 2018), Brussels, Belgium, 14 - 15 September 2018, pp.44-52, (Full Text)

8. Investigation of Microstructures and Mechanical Properties of the Joints Which Welded by the Pinless Tool and The Designed Tool to Reduce the Keyhole in The Friction Stir Spot Welding

Kahraman F., Demirer Kahraman A., Yolcu C., Gençer G. M., Tüm M.
International Academic Conference on Applied Research in Engineering, Science & Technology (ICAREST 2018), Brussels, Belgium, 14 - 15 September 2018, pp.18-28, (Full Text)

9. Improvement of the Tribological Characteristic of Bimetallic Journal Bearing With Surface Coating by Cold Spray Process

Yolcu C., Gençer G. M., Kahraman F., Demirer Kahraman A.
International Academic Conference on Applied Research in Engineering, Science & Technology (ICARET 2018), Brussels, Belgium, 14 - 15 September 2018, pp.11-16, (Full Text)

10. Examination the Wear Behaviors of Deformed Cu Based Bimetals with Ultrasonic Impact Treated

Yolcu C., Gençer G. M., Kahraman F.
International Advanced Researches & Engineering Congress (IAREC 2017), Osmaniye, Turkey, 16 - 18 November 2017, pp.492, (Summary Text) Sustainable Development

11. Investigation of Surface Mechanical Properties of Cu Based Bimetal Sliding Bearing Materials

Gençer G. M., Yolcu C., Kahraman F.
International Advanced Researches & Engineering Congress (IAREC 2017), Osmaniye, Turkey, 16 - 18 November 2017, pp.491, (Summary Text)

12. “Standart ATCC 27853 Pseudomonas aeruginosa ile Enfekte J774A.1 Makrofaj Hücrelerinde Nanoteknolojik Gümüş Yüzey Kaplamasının Apoptoz Nekroz ve Nitrik Oksit Yanıtlarına Etkisi

BAYRAKAL V., Gencer G. M., BASKIN A. H.
XXIV. Ulusal İmmünoloji Kongresi, İstanbul, Turkey, 27 - 29 April 2017, pp.10, (Summary Text)

13.

Karadeniz Ö., Gençer G. M., Şavur M., Karadeniz S.
16th International Materials Symposium (IMSP'2016), Denizli, Turkey, 12 - 14 October 2016, pp.1268-1281, (Full Text)

14.

Karadeniz Ö., Gençer G. M., Karadeniz S.
16th International Materials Symposium (IMSP'2016), Denizli, Turkey, 12 - 14 October 2016, pp.532-545, (Full Text)

15.

Karadeniz Ö., Gençer G. M., Şavur M., Karadeniz S.
16th International Materials Symposium (IMSP'2016), Denizli, Turkey, 12 - 14 October 2016, pp.1673-1687, (Full Text)

16. The Usage of Vibratory Stress Relief Method in Welding

Kahraman F., Gençer G. M.
3rd International Conference On Thermophysical And Mechanical Properties Of Advanced Materials (THERMAM 2016), İzmir, Turkey, 1 - 03 September 2016, pp.48, (Summary Text)

17. THE EFFECTS OF PRESSURE DEFORMATION ON SURFACE MECHANICAL PROPERTIES AND MICROSTRUCTURE OF SAE 1008 STEEL

Gençer G. M., Kahraman F.
Conference of The International Journal of Arts & Sciences, Paris, France, 11 - 14 April 2016, pp.203-207, (Full Text)

18. PLASMA IMMERSION ION IMPLANTATION (PIII) METHOD

Gençer G. M., Karadeniz S.
International Conference: “Thermophysical and Mechanical Properties of Advanced Materials”(THERMAM 2015), Baku, Azerbaijan, 17 - 18 September 2015, pp.33, (Summary Text)

19.

Gençer G. M., Karadeniz Ö., Karadeniz S.
15th International Materials Symposium (IMSP’2014), Denizli, Turkey, 15 - 17 October 2014, pp.985-993, (Full Text)

20.

Gençer G. M., Karadeniz Ö., Karadeniz S.
15th International Materials Symposium (IMSP’2014), Denizli, Turkey, 15 - 17 October 2014, pp.994-1003, (Full Text)

21.

Karadeniz S., Gençer G. M., Karadeniz Ö.
14th International Materials Symposium (IMSP’2012), Denizli, Turkey, 10 - 12 October 2012, pp.826-832, (Full Text)

22.

Karadeniz S., Gençer G. M., Karadeniz Ö.
14th International Materials Symposium (IMSP’2012), Denizli, Turkey, 10 - 12 October 2012, pp.813-825, (Full Text)

23.

Karadeniz S., Gençer G. M., Karadeniz Ö.
13th International Materials Symposium (IMSP 2010), Denizli, Turkey, 13 - 15 October 2010, pp.1490-1495, (Full Text)

24.

Karadeniz S., Gençer G. M., Karadeniz Ö.
13th International Materials Symposium (IMSP 2010), Denizli, Turkey, 13 - 15 October 2010, pp.1535-1541, (Full Text)

25.

Karadeniz S., Gençer G. M., Karadeniz Ö.
13th International Materials Symposium (IMSP 2010), Denizli, Turkey, 13 - 15 October 2010, pp.971-980, (Full Text)

26. Kaynakta Dalga Formu Kontrol Teknolojisi

Karadeniz S., Gençer G. M., Karadeniz Ö.
Kaynak teknolojisi VII. Ulusal Kongre ve Sergisi, Ankara, Turkey, 13 - 14 November 2009, pp.273-280, (Full Text)