Prof. Dr. HASAN ÖZTÜRK

Yayın Ağı

Makaleler 66

1. The Mechanical and Modal Characteristics of an Aluminum-Tourmaline Metal Matrix Composite Material

Daş O., Öztürk H., Kıral Z., Gören Kıral B., Yücel Öztürk Y., Uyulgan B., et al.

SIGMA JOURNAL OF ENGINEERING AND NATURAL SCIENCES , cilt.45, sa.2, ss.1-15, 2027 (ESCI, Scopus) Sürdürülebilir Kalkınma

2. Vibration characteristics of a cracked multi-bay frame with moving oscillatory loads

Demirtaş S., Öztürk H., Kıral Z.

BRIDGE STRUCTURES , cilt.21, sa.4, ss.180-197, 2025 (ESCI, Scopus)

3. A novel linear regression model based controller design for the active tuned mass damper system of multi-story building structures

Ümütlü R. C., Bıdıklı B., Öztürk H.

JOURNAL OF BUILDING ENGINEERING , cilt.108, ss.1-20, 2025 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

4. Determination of the Abrasion Resistance of Upholstery Fabrics Used in Office Chairs Having a Massage Mechanism

Çetin M. S., Altay O., Öztürk H., Karabay G., Kurumer G.

Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi , cilt.27, sa.80, ss.199-205, 2025 (TRDizin) Sürdürülebilir Kalkınma

5. A COMPARATIVE STUDY OF DIVERSE AUTOENCODER MODELS IN LOCAL GEAR PITTING FAULT DIAGNOSIS

Yurtsever M., Ümütlü R. C., Öztürk H.

Konya mühendislik bilimleri dergisi (Online) , cilt.13, sa.1, ss.59-73, 2025 (ESCI, Scopus, TRDizin)

6. LSC-VAE: a lightweight separable convolutional variational autoencoder for unsupervised and generalisable gearbox fault detection

Das O., Bagci Das D., ÖZTÜRK H.

Nondestructive Testing and Evaluation , 2025 (SCI-Expanded, Scopus)

7. Effluent concentration prediction using an artificial neural network technique in dissolved aeration flotation systems

Özdemir Y., Dölgen D., Öztürk H., Alpaslan M. N.

INTERNATIONAL JOURNAL OF ENVIRONMENTAL SCIENCE AND TECHNOLOGY , cilt.22, sa.3, ss.1723-1734, 2025 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

8. Comparative And Dynamic Analysis of Türkiye's Competitiveness in Unmanned Aerial Vehicles

AYDIN Ü., Ates E., ÖZTÜRK H.

SOSYOEKONOMI , cilt.32, sa.62, ss.11-30, 2024 (ESCI, Scopus, TRDizin)

9. Adaptive backstepping control design for ATMD systems in nonlinear structures with nonlinear disturbance and parametric uncertainties

Ümütlü R. C., Bıdıklı B., Öztürk H., Pavıc A.

JVC/JOURNAL OF VIBRATION AND CONTROL , cilt.30, sa.7-8, ss.1635-1646, 2024 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

10. Free vibration and buckling analyses of curved plate frames using finite element method

Daş O., Öztürk H., Gönenli C.

STRUCTURAL ENGINEERING AND MECHANICS , cilt.86, sa.6, ss.1-14, 2023 (SCI-Expanded, Scopus)

11. Dynamic and Buckling Analysis of the Laminated Composite Curved Plate Frame Structures

Daş O., Öztürk H., Gönenli C.

Afyon Kocatepe Üniversitesi Fen ve Mühendislik Bilimleri Dergisi , cilt.23, sa.1, ss.228-246, 2023 (TRDizin)

12. A preliminary study on the manufacturing aluminum–potassium feldspar metal matrix composite materials Eine vorläufige Studie zur Herstellung von Aluminium-Kalium-Feldspat-Metallmatrix-Verbundwerkstoffen

Das O., Aybarc U., Yücel Öztürk Y., Gören Kıral B., Öztürk H., Kıral Z., et al.

Materialwissenschaft und Werkstofftechnik , cilt.54, sa.1, ss.109-119, 2023 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

13. The effect of large deflection on laminated composite plates

GÖNENLİ C., ÖZTÜRK H., DAŞ O.

SIGMA JOURNAL OF ENGINEERING AND NATURAL SCIENCES , cilt.40, sa.4, 2022 (ESCI)

14. Dynamic Stability of Diamond Frame Structures

ÖZİL F., DEMİRTAŞ S., DOĞAN H., ÖZTÜRK H., SABUNCU M.

INTERNATIONAL APPLIED MECHANICS , cilt.56, sa.6, 2022 (ESCI, Scopus)

15. Artificial Neural Network-based Prediction Technique for Waterproofness of Seams Obtained by Using Fusible Threads

KARABAY G., ŞENOL Y., ÖZTÜRK H., Mesegul C.

Fibres and Textiles in Eastern Europe , cilt.151, sa.3, ss.27-32, 2022 (SCI-Expanded, Scopus)

16. Dynamic Stability of Cracked Composite Plates

SAYER Ö., ÖZTÜRK H., YENİ Ç. E., BALTACI A., ÜMÜTLÜ R. C.

Bilecik Şeyh Edebali Üniversitesi Fen Bilimleri Dergisi , cilt.9, sa.1, ss.208-224, 2022 (TRDizin)

17. An Adaptive Controller Design for ATMD System Used in Structures Under the Effect of Unknown Nonlinear Effects

ÜMÜTLÜ R. C., BIDIKLI B., ÖZTÜRK H.

Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi , cilt.24, sa.71, ss.571-579, 2022 (TRDizin)

18. Vibration and dynamic stability analysis of curved beam with suspended spring-mass systems

Can S. V., Cankaya P., ÖZTÜRK H., Sabuncu M.

MECHANICS BASED DESIGN OF STRUCTURES AND MACHINES , cilt.50, sa.3, ss.954-968, 2022 (SCI-Expanded, Scopus)

19. A backstepping control design for ATMD systems of building structure against earthquake excitations in the presence of parametric uncertainty

ÜMÜTLÜ R. C., Bidikli B., ÖZTÜRK H.

STRUCTURAL CONTROL & HEALTH MONITORING , cilt.29, sa.3, 2022 (SCI-Expanded, Scopus)

20. Effect of crack on free vibration of a pre-stressed curved plate

Gonenli C., ÖZTÜRK H., DAŞ O.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE , cilt.236, sa.2, ss.811-825, 2022 (SCI-Expanded, Scopus)

21. Vibration analysis of a pre-stressed curved thin plate

GÖNENLİ C., ÖZTÜRK H., DAŞ O.

Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi , cilt.28, ss.72-80, 2022 (ESCI, TRDizin)

22. A robust adaptive control design for active tuned mass damper systems of multistory buildings

ÜMÜTLÜ R. C., ÖZTÜRK H., Bidikli B.

JOURNAL OF VIBRATION AND CONTROL , cilt.27, sa.23-24, ss.2765-2777, 2021 (SCI-Expanded, Scopus)

23. Dynamic Stability Analysis of the Laminated Composite Curved Frame Structures

DAŞ O., ÖZTÜRK H., GÖNENLİ C.

Uludağ University Journal of The Faculty of Engineering , cilt.26, sa.2, ss.629-648, 2021 (TRDizin)

24. Effective Mode Shapes of Viaducts Subjected to High-speed Train

DEMİRTAŞ S., ÖZTÜRK H.

Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi , cilt.23, sa.67, ss.295-307, 2021 (TRDizin)

25. Effects of the crack location on the dynamic response of multi-storey frame subjected to the passage of a high-speed train

DEMİRTAŞ S., ÖZTÜRK H.

JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING , cilt.43, sa.2, 2021 (SCI-Expanded, Scopus)

26. Fault severity detection of a worm gearbox based on several feature extraction methods through a developed condition monitoring system

Hizarci B., ÜMÜTLÜ R. C., KIRAL Z., ÖZTÜRK H.

SN APPLIED SCIENCES , cilt.3, sa.1, 2021 (ESCI, Scopus)

27. ASILI KÜTLE-YAY SİSTEMLERİNE SAHİP KOMPOZİT EĞRİ KİRİŞİN DİNAMİK KARARLILIK ANALİZİ

VATAN S., ÖZTÜRK H.

Uludağ University Journal of The Faculty of Engineering , cilt.25, sa.3, ss.1557-1576, 2020 (TRDizin)

28. Effective mode shapes of multi-storey frames subjected to moving train loads

Demirtas S., ÖZTÜRK H.

COUPLED SYSTEMS MECHANICS , cilt.9, sa.4, ss.311-323, 2020 (ESCI, Scopus)

29. Finite element vibration analysis of laminated composite parabolic thick plate frames

DAŞ O., ÖZTÜRK H., GÖNENLİ C.

STEEL AND COMPOSITE STRUCTURES , cilt.35, sa.1, ss.43-59, 2020 (SCI-Expanded, Scopus)

30. SEATING COMFORT SATISFACTION LEVEL OF OFFICE WORKERS AND THEIR EXPECTATIONS FROM AN OFFICE CHAIR

ÇETİN M. S., KARABAY G., ÖZTÜRK H., KURUMER G.

Mugla Journal of Science and Technology , cilt.6, sa.1, ss.72-77, 2020 (TRDizin)

31. Classification of pitting fault levels in a worm gearbox using vibration visualization and ANN

ÜMÜTLÜ R. C., Hizarci B., ÖZTÜRK H., KIRAL Z.

SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES , cilt.45, sa.1, 2020 (SCI-Expanded, Scopus)

32. FREE VIBRATION AND BUCKLING ANALYSIS OF PARABOLIC FRAME STRUCTURES

DAŞ O., ÖZTÜRK H., GÖNENLİ C.

International Journal of Scientific Research and Management , cilt.7, sa.12, ss.295-306, 2019 (Hakemli Dergi)

33. Vibration Region Analysis for Condition Monitoring of Gearboxes Using Image Processing and Neural Networks

Hizarci B., ÜMÜTLÜ R. C., Ozturk H., Kiral Z.

EXPERIMENTAL TECHNIQUES , cilt.43, sa.6, ss.739-755, 2019 (SCI-Expanded, Scopus)

34. EFFECTS OF THE RADIUS OF CURVATURE ON NATURAL FREQUENCY AND MODE SHAPE

GÖNENLİ C., ÖZTÜRK H., DAŞ O.

International Journal of Scientific Research and Management , cilt.7, sa.12, ss.283-294, 2019 (Hakemli Dergi)

35. Effect of inner stiffeners on vibration and noise levels of gearbox housing without changing the mass

ÜMÜTLÜ R. C., Hizarci B., Dalbicer C., ÖZTÜRK H., KIRAL Z.

JOURNAL OF MEASUREMENTS IN ENGINEERING , cilt.7, sa.2, ss.58-66, 2019 (ESCI, Scopus)

36. Dynamic Response of Multi-bay Frames Subjected to Successive Moving Forces

Demirtas S., ÖZTÜRK H., Sabuncu M.

INTERNATIONAL JOURNAL OF STRUCTURAL STABILITY AND DYNAMICS , cilt.19, sa.4, 2019 (SCI-Expanded, Scopus)

37. Classification of Helical Gear Fault Levels Using Frequency Component Based Statistical Analysis with ANN.

Ümütlü R. C., Hızarcı B., Öztürk H., Kıral Z.

Usak University Journal of Engineering Sciences , cilt.1, sa.2, ss.76-86, 2018 (Hakemli Dergi)

38. Classification of Helical Gear Fault Levels Using Frequency Component Based Statistical Analysis with ANN

ÜMÜTLÜ R. C., HIZARCI B., ÖZTÜRK H., KIRAL Z.

Usak University Journal of Engineering Sciences , cilt.1, sa.2, ss.76-86, 2018 (Hakemli Dergi)

39. Titreşim Bölgesi Analizi ile Bir Dişli Kutusunda Yüzey Oyukçuk Hata Seviyelerinin Tespiti

HIZARCI B., ÜMÜTLÜ R. C., KIRAL Z., ÖZTÜRK H.

Mühendis ve Makina , cilt.59, sa.693, ss.1-14, 2018 (TRDizin)

40. Ofis Koltuğu Anket Çalışması ve Masaj Mekanizması Tasarımı

ÇETİN M. S., ALTAY O., ÖZTÜRK H., KURUMER G., KARABAY G.

Dokuz Eylül Üniversitesi-Mühendislik Fakültesi Fen ve Mühendislik Dergisi , cilt.20, sa.60, ss.804-816, 2018 (TRDizin)

41. Artificial Neural Network System for Prediction of Dimensional Properties of Cloth in Garment Manufacturing: Case Study on a T-Shirt

KALKANCI M., Kurumer G., ÖZTÜRK H., SİNECEN M., KAYACAN Ö.

FIBRES & TEXTILES IN EASTERN EUROPE , cilt.25, sa.4, ss.135-140, 2017 (SCI-Expanded, Scopus)

42. Proposal for a new mass distribution control system and its simulation for vibration reduction on rotating machinery

Enginoglu O., ÖZTÜRK H.

JOURNAL OF SOUND AND VIBRATION , cilt.385, ss.1-15, 2016 (SCI-Expanded, Scopus)

43. Examining Comfort Properties Of Leather and Artificial Leather Cover Materials

Çetin M. S., KARABAY G., ÖZTÜRK H., kurumer g.

Annals of The Universities of Oredea Fascicle of Textiles-Leatherwork , cilt.17, ss.119-123, 2016 (Hakemli Dergi)

44. Static and dynamic stability of cracked multi-storey steel frames

Sabuncu M., ÖZTÜRK H., Yashar A.

STRUCTURAL ENGINEERING AND MECHANICS , cilt.58, sa.1, ss.103-119, 2016 (SCI-Expanded, Scopus)

45. Dynamic Analysis of Elastically Supported Cracked Beam Subjected to a Concentrated Moving Load

ÖZTÜRK H., KIRAL Z., GÖREN KIRAL B.

LATIN AMERICAN JOURNAL OF SOLIDS AND STRUCTURES , cilt.13, sa.1, ss.175-200, 2016 (SCI-Expanded, Scopus)

46. Dynamic stability of cracked multi-bay frame structures

ÖZTÜRK H., Yashar A., Sabuncu M.

MECHANICS OF ADVANCED MATERIALS AND STRUCTURES , cilt.23, sa.6, ss.715-726, 2016 (SCI-Expanded, Scopus)

47. Vibration and buckling analysis of a curved sandwich composite beam with FEM

TOYGAR E. M., SAYMAN O., KEMİKLİOĞLU U., ÖZTÜRK H., KIRAL Z., MALEKI F. K.

Research on Engineering Structures Materials , cilt.2, 2016 (TRDizin)

48. Stability analysis of delaminated composite beams

GÖREN KIRAL B., KIRAL Z., ÖZTÜRK H.

COMPOSITES PART B-ENGINEERING , cilt.79, ss.406-418, 2015 (SCI-Expanded, Scopus)

49. Vibration analysis of a pre-stressed laminated composite curved beam

ÖZTÜRK H.

STEEL AND COMPOSITE STRUCTURES , cilt.19, sa.3, ss.635-659, 2015 (SCI-Expanded, Scopus)

50. Uzaktan kontrol ile atık su terfi merkezininizlenmesi

Bakak İ., ÖZTÜRK H., BAKAK Ö.

Makine Teknolojileri Elektronik Dergisi , 2014 (TRDizin)

51. Effects of an edge crack on the free vibration and lateral buckling of a cantilever laminated composite slender beam

Karaagac C., ÖZTÜRK H., Sabuncu M.

JOURNAL OF VIBRATION AND CONTROL , cilt.19, sa.16, ss.2506-2522, 2013 (SCI-Expanded, Scopus)

52. Vibration analysis of cracked frame structures

Ibrahim A. M., ÖZTÜRK H., Sabuncu M.

STRUCTURAL ENGINEERING AND MECHANICS , cilt.45, sa.1, ss.33-52, 2013 (SCI-Expanded, Scopus)

53. Tabakalı eğri çubukların dinamikkararlılık analizi

Günyar A., ÖZTÜRK H., SABUNCU M.

DEÜ Mühendislik Bilimleri Dergisi , 2012 (TRDizin)

54. Dynamic stability of multi-span frames subjected to periodic loading

Sakar G., ÖZTÜRK H., Sabuncu M.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH , cilt.70, ss.65-70, 2012 (SCI-Expanded, Scopus)

55. Crack effects on the in-plane static and dynamic stabilities of a curved beam with an edge crack

Karaagac C., ÖZTÜRK H., Sabuncu M.

JOURNAL OF SOUND AND VIBRATION , cilt.330, sa.8, ss.1718-1736, 2011 (SCI-Expanded, Scopus)

56. In-plane free vibration of a pre-stressed curved beam obtained from a large deflected cantilever beam

ÖZTÜRK H.

FINITE ELEMENTS IN ANALYSIS AND DESIGN , cilt.47, sa.3, ss.229-236, 2011 (SCI-Expanded, Scopus)

57. Detection and Advancement Monitoring of Distributed Pitting Failure in Gears

ÖZTÜRK H., YEŞİLYURT İ., Sabuncu M.

JOURNAL OF NONDESTRUCTIVE EVALUATION , cilt.29, sa.2, ss.63-73, 2010 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

58. Investigation of effectiveness of some vibration-based techniques in early detection of real-time fatigue failure in gears

ÖZTÜRK H., YEŞİLYURT İ., Sabuncu M.

SHOCK AND VIBRATION , cilt.17, sa.6, ss.741-757, 2010 (SCI-Expanded, Scopus)

59. Free vibration and lateral buckling of a cantilever slender beam with an edge crack: Experimental and numerical studies

Karaagac C., ÖZTÜRK H., Sabuncu M.

JOURNAL OF SOUND AND VIBRATION , cilt.326, ss.235-250, 2009 (SCI-Expanded, Scopus)

60. Early detection of pitting damage in gears using mean frequency of scalogram

ÖZTÜRK H., Sabuncu M., YEŞİLYURT İ.

JOURNAL OF VIBRATION AND CONTROL , cilt.14, sa.4, ss.469-484, 2008 (SCI-Expanded, Scopus)

61. Lateral dynamic stability analysis of a cantilever laminated composite beam with an elastic support

Karaagac C., ÖZTÜRK H., Sabuncu M.

INTERNATIONAL JOURNAL OF STRUCTURAL STABILITY AND DYNAMICS , cilt.7, sa.3, ss.377-402, 2007 (SCI-Expanded, Scopus)

62. Tool condition monitoring in milling using vibration analysis

Yesilyurt I., ÖZTÜRK H.

INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH , cilt.45, sa.4, ss.1013-1028, 2007 (SCI-Expanded, Scopus)

63. Artificial neural network-based prediction technique for wear loss quantities in Mo coatings

Cetinel H., ÖZTÜRK H., Celik E., Karlik B.

WEAR , cilt.261, sa.10, ss.1064-1068, 2006 (SCI-Expanded, Scopus)

64. In-plane stability analysis of non-uniform cross-sectioned curved beams

ÖZTÜRK H., Yesilyurt I., Sabuncu M.

JOURNAL OF SOUND AND VIBRATION , cilt.296, ss.277-291, 2006 (SCI-Expanded, Scopus)

65. Stability analysis of a cantilever composite beam on elastic supports

ÖZTÜRK H., Sabuncu M.

COMPOSITES SCIENCE AND TECHNOLOGY , cilt.65, sa.13, ss.1982-1995, 2005 (SCI-Expanded, Scopus)

66. Effects of spring stiffness and spring position on the stability of cantilever thick beams

Sabuncu M., ÖZTÜRK H.

Modelling, Measurement and Control B , cilt.71, ss.33-52, 2002 (Scopus)

Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 39

39. Periyodik eksenel yük altındaki değişken kesitliTimoshenko çubuğunun statik ve dinamik stabilitesine elastik mesnetin özelliklerinin ve konumununetkileri

ÖZTÜRK H., SABUNCU M.

9 Ulusal Makine Teorisi Sempozyumu, Türkiye, 1 - 03 Eylül 1999, (Tam Metin Bildiri)

Kitaplar 1

1. Tek Serbestlik Dereceli Sistemlerin Harmonik Uyarımı, TSD Sistemlerin Geçici Rejim Titreşimleri

GÜNDOĞDU Ö., ŞAKAR G., KIRAL Z., MALGACA L., ÖZTÜRK H.

Mekanik Titreşimler Teori ve Uygulamalar, Ömer Gündoğdu, Editör, PALME, Ankara, ss.205-381, 2016

Bilirkişi Raporları 1

1. Titreşim Analizi ile Rulmanlarda Kestirimci Bakım HAKEMLİK

ÖZTÜRK H.

2015

Metrikler

Yayın

108

Yayın (WoS)

Yayın (Scopus)

Atıf (WoS)

602

H-İndeks (WoS)

Atıf (Scopus)

700

H-İndeks (Scopus)

Atıf (Scholar)

1023

H-İndeks (Scholar)

Atıf (Diğer Toplam)

Proje

Fikri Mülkiyet

Tez Danışmanlığı

Açık Erişim

BM Sürdürülebilir Kalkınma Amaçları

Yayınlar & Eserler

Yayın

Yayın (WoS)

Yayın (Scopus)

Atıf (WoS)

H-İndeks (WoS)

Atıf (Scopus)

H-İndeks (Scopus)

Atıf (Scholar)

H-İndeks (Scholar)

Atıf (Diğer Toplam)

Proje

Fikri Mülkiyet

Tez Danışmanlığı

Açık Erişim