Yayınlar & Eserler

Yayın Ağı
Makaleler 22
Tümü (22)
SCI-E, SSCI, AHCI (18)
SCI-E, SSCI, AHCI, ESCI (18)
Scopus (18)
TRDizin (2)
Diğer Yayınlar (2)

1. ABRASION RESISTANCE PREDICTION OF TRUE MARBLES USING CHEMICAL COMPOSITION DATA: A NEW APPROACH

GÜNEŞ N., GÖKTAN R. M.
Mühendislik Bilimleri ve Tasarım Dergisi , cilt.11, sa.4, ss.1245-1256, 2023 (TRDizin) identifier

2. Comparison and combination of two NDT methods with implications for compressive strength evaluation of selected masonry and building stones

Yilmaz N., Goktan R. M.
BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT , cilt.78, sa.6, ss.4493-4503, 2019 (SCI-Expanded, Scopus) identifier identifier

3. Analysis of the Leeb Hardness Test Data Obtained by Using Two Different Rock CoreHolders

YILMAZ N., GÖKTAN R. M.
Süleyman Demirel ÜniversitesiFen Bilimleri Enstitüsü Dergisi , cilt.22, ss.24-31, 2018 (TRDizin) identifier

4. Diamond Tool Specific Wear Rate Assessment in Granite Machining by Means of Knoop Micro-Hardness and Process Parameters

Goktan R. M., Yilmaz N.
ROCK MECHANICS AND ROCK ENGINEERING , cilt.50, sa.9, ss.2327-2343, 2017 (SCI-Expanded, Scopus) identifier identifier

5. Correlative relations between three-body abrasion wear resistance and petrographic properties of selected granites used as floor coverings

Yilmaz N., Goktan R. M., ONARGAN T.
WEAR , cilt.372, ss.197-207, 2017 (SCI-Expanded, Scopus) identifier identifier

6. Influence of rock cradle block geometry on rebound hardness

Yilmaz N., Goktan R. M., YAVUZ A. B., Karaca Z.
BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT , cilt.75, sa.1, ss.325-339, 2016 (SCI-Expanded, Scopus) identifier identifier

7. Size analysis of the chips generated during abrasive machining of granite in relation to productivity and efficiency parameters

Yilmaz N.
PARTICULATE SCIENCE AND TECHNOLOGY , cilt.34, sa.5, ss.593-601, 2016 (SCI-Expanded, Scopus) identifier identifier

8. Rock cuttability assessment using the concept of hybrid dynamic hardness (HDH)

Yilmaz N., Tumaç D., Goktan R. M.
BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT , cilt.74, sa.4, ss.1363-1374, 2015 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier identifier

9. Particle Size Distribution and Shape Characterization of the Chips Produced During Granite Machining in Relation to Process Forces and Specific Energy

Yilmaz N., GÖKTAN R. M., GAŞAN H., Celik O. N.
PARTICULATE SCIENCE AND TECHNOLOGY , cilt.31, sa.3, ss.277-286, 2013 (SCI-Expanded, Scopus) identifier identifier

10. Process efficiency comparison of a sandwich-core sawblade and a conventional sawblade used in stone-machining

Yilmaz N.
JOURNAL OF CLEANER PRODUCTION , cilt.47, ss.26-31, 2013 (SCI-Expanded, Scopus) identifier identifier

11. The Influence of Testing Procedures on Uniaxial Compressive Strength Prediction of Carbonate Rocks from Equotip Hardness Tester (EHT) and Proposal of a New Testing Methodology: Hybrid Dynamic Hardness (HDH)

Yilmaz N.
ROCK MECHANICS AND ROCK ENGINEERING , cilt.46, sa.1, ss.95-106, 2013 (SCI-Expanded, Scopus) identifier identifier

12. Abrasion wear characterization of some selected stone flooring materials with respect to contact load

Karaca Z., Yilmaz N., Goktan R. M.
CONSTRUCTION AND BUILDING MATERIALS , cilt.36, ss.520-526, 2012 (SCI-Expanded, Scopus) identifier identifier

13. Considerations on the European Standard en 14157 test methods: Abrasion resistance of natural stones used for flooring in buildings

Karaca Z., Günes YIlmaz N., Goktan R.
Rock Mechanics and Rock Engineering , cilt.45, sa.1, ss.103-111, 2012 (SCI-Expanded, Scopus) identifier identifier

14. Abrasivity assessment of granitic building stones in relation to diamond tool wear rate using mineralogy-based rock hardness indexes

Yilmaz N.
Rock Mechanics and Rock Engineering , cilt.44, sa.6, ss.725-733, 2011 (SCI-Expanded, Scopus) identifier identifier

15. An investigation of the petrographic and physico mechanical properties of true granites influencing diamond tool wear performance and development of a new wear index

YILMAZ N., GÖKTAN R. M., KİBİCİ Y.
wear , cilt.271, ss.960-969, 2011 (SCI-Expanded, Scopus) identifier identifier

16. Relations between some quantitative petrographic characteristics and mechanical strength properties of granitic building stones

Güneş Yilmaz N., Mete Goktan R., Kibici Y.
International Journal of Rock Mechanics and Mining Sciences , cilt.48, sa.3, ss.506-513, 2011 (SCI-Expanded, Scopus) identifier identifier

17. Relative brittleness characterization of some selected granitic building stones: Influence of mineral grain size

Yilmaz N., Karaca Z., Goktan R. M., AKAL C.
CONSTRUCTION AND BUILDING MATERIALS , cilt.23, sa.1, ss.370-375, 2009 (SCI-Expanded, Scopus) identifier identifier

18. Comparison of averaging procedures for point load testing of rock.

Güneş N.
Geotechnical Testing Journal , cilt.31, sa.31, ss.456-460, 2008 (Hakemli Dergi)

19. A new methodology for the analysis of the relationship between rock brittleness index and drag pick cutting efficiency

Güneş N.
JOURNAL OF THE SOUTHERN AFRICAN INSTITUTE OF MINING AND METALLURGY , cilt.105, sa.105, ss.727-734, 2007 (SCI-Expanded, Scopus)

20. Prediction of radial bit cutting force in high-strength rocks using multiple linear regression analysis

YILMAZ N., YURDAKUL M., Goktan R.
International Journal of Rock Mechanics and Mining Sciences , cilt.44, sa.6, ss.962-970, 2007 (SCI-Expanded, Scopus) identifier identifier

21. A semi-empirical approach to cuttingforce prediction for point-attack picks

Güneş N.
The South African Institute of Mining andMetallurgy, , cilt.105, ss.257-263, 2005 (Hakemli Dergi)

22. A comparative study of Schmidt hammer testing procedures with reference to rock cutting machine performance prediction

Goktan R., Gunes N.
International Journal of Rock Mechanics and Mining Sciences , cilt.42, sa.3, ss.466-472, 2005 (SCI-Expanded, Scopus) identifier identifier
Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 4

1. Avrupa ve Amerikan Standartlarına Göre Belirlenen Doğal Taş Aşınma Direnci Değerlerinin Tasarım Amaçlı Karşılaştırılması

YILMAZ N., GÖKTAN R. M.
mersem 2017, 13 - 15 Aralık 2017, (Tam Metin Bildiri) Sürdürülebilir Kalkınma

2. The Influence of Leeb Hardness Testing Procedures on Uniaxial Compressive Strength Prediction of Some Selected Decorative Stones

Yılmaz N., Göktan R. M., Onargan T.
Proceedings of the XIII National Conference with International Participation of the Open and Underwater Mining of Minerals, Varna, Bulgaristan, 1 - 05 Eylül 2015, (Tam Metin Bildiri)

3. MERMER MADENCİLİĞİNDE KATI ATIK YÖNETİMİ

Onargan T., Küçük K., Akıncı G., Yılmaz N.
6. TÜRK ALMAN KATI ATIK GÜNLERİ, İzmir, Türkiye, 26 - 29 Mayıs 2015, (Tam Metin Bildiri) Sürdürülebilir Kalkınma

4. Doğaltaş Dinamik Yüzey Sertliği DYS Tayininde TS 699 2009 Standardına Alternatif Deney Yöntemlerinin Araştırılması

YILMAZ N., ELÇİ H., GÖKTAN R. M.
8. Uluslararası Mermer ve Doğaltaş Kongresi, Afyon, Türkiye, 14 Aralık 2012, (Tam Metin Bildiri)
Metrikler

Yayın

27

Yayın (WoS)

19

Yayın (Scopus)

19

Atıf (WoS)

225

H-İndeks (WoS)

8

Atıf (Scopus)

755

H-İndeks (Scopus)

14

Atıf (Scholar)

90

H-İndeks (Scholar)

1

Atıf (Sobiad)

36

H-İndeks (Sobiad)

3

Proje

6
BM Sürdürülebilir Kalkınma Amaçları