INTERNATIONAL JOURNAL OF THERMOPHYSICS, cilt.38, sa.12, 2017 (SCI-Expanded)
In this study, thermal properties of high-density polyethylene (HDPE) filled with nanosized Al particles (80nm) were investigated. Samples were prepared using melt mixing method up to filler volume fraction of 29%, followed by compression molding. By using modulated photothermal radiometry (PTR) technique, thermal diffusivity and thermal effusivity were obtained. The effective thermal conductivity of nanocomposites was calculated directly from PTR measurements and from the measurements of density, specific heat capacity (by differential scanning calorimetry) and thermal diffusivity (obtained from PTR signal amplitude and phase). It is concluded that the thermal conductivity of HDPE composites increases with increasing Al fraction and the highest effective thermal conductivity enhancement of 205% is achieved at a filler volume fraction of 29%. The obtained results were compared with the theoretical models and experimental data given in the literature. The results demonstrate that Agari and Uno, and Cheng and Vachon models can predict well the thermal conductivity of HDPE/Al nanocomposites in the whole range of Al fractions.