Activated carbon addition to an activated sludge model reactor for color removal from a cotton textile processing wastewater

Pala A., Tokat E.

JOURNAL OF ENVIRONMENTAL ENGINEERING-ASCE, vol.129, no.11, pp.1064-1068, 2003 (SCI-Expanded) identifier identifier

  • Publication Type: Article / Article
  • Volume: 129 Issue: 11
  • Publication Date: 2003
  • Doi Number: 10.1061/(asce)0733-9372(2003)129:11(1064)
  • Journal Name: JOURNAL OF ENVIRONMENTAL ENGINEERING-ASCE
  • Journal Indexes: Science Citation Index Expanded (SCI-EXPANDED), Scopus
  • Page Numbers: pp.1064-1068
  • Keywords: activated carbon, activated sludge, color, wastewater, industrial water, textiles, abatement and removal
  • Dokuz Eylül University Affiliated: Yes

Abstract

Color removal from cotton textile processing wastewater by addition of powdered activated carbon (PAC) into a lab-scale activated sludge system was examined. The activated sludge system was continuously operated in different sludge ages (SRTs) and hydraulic retention times (HRTs). SRT = 30 d and HRT = 1.6 d operation resulted in up to 36% color removal and 94% COD removal. PAC was added 100, 200, and 400 mg/L into the activated sludge system under these operating conditions. The results indicated that 100 mg/L PAC was sufficient to remove the maximum color measured (up to 50 m(-1)) from the wastewater. The addition of PAC did not affect chemical oxygen demand (COD) removal significantly. Oxygen uptake rate (OUR) tests were also performed to investigate the microbial activities controlling the system performance. The average OUR was 74.1 mg/L/h without PAC addition while it was 70 mg/L/h with PAC addition. Adsorbable organic halogens of the effluent wastewater decreased from 400 to 50 mug/L with the addition of PAC. Toxicity dilution factor decreased from 2 to 1.5 with the PAC addition into the activated sludge system.