JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, vol.22, no.17, pp.1607-1623, 2003 (SCI-Expanded)
In this study, an elastic-plastic stress analysis is carried out in a steel fiber reinforced aluminum metal-matrix composite cantilever beam. The composite beam is manufactured by squeeze casting method. It is loaded by a bending moment at the free end. In the solution, the material is assumed to be linear strain hardening. The orientation angles of the fibers are chosen as 0, 30, 45, 60 and 90degrees. An analytical solution is carried out under the Bernoulli-Navier hypotheses for small plastic deformations. The magnitude of the residual stress component of or, is maximized at the upper and lower surfaces. However, it becomes the highest at the boundary of the elastic and plastic regions for further expansions of the plastic zone. The magnitude of the residual stress component of sigma(x) is found to be the highest for 0degrees orientation angle. It is also obtained that the vertical displacement is maximized for the same orientation angle.