Formation of Globular Microstructure in A380 Aluminum Alloy by Cooling Slope Casting


Saklakoğlu N., İrizalp S., Kasman Ş., Saklakoğlu İ. E.

ADVANCED MATERIALS RESEARCH, cilt.264, sa.265, ss.272-277, 2011 (Hakemli Dergi) identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 264 Sayı: 265
  • Basım Tarihi: 2011
  • Doi Numarası: 10.4028/www.scientific.net/amr.264-265.272
  • Dergi Adı: ADVANCED MATERIALS RESEARCH
  • Derginin Tarandığı İndeksler: INSPEC
  • Sayfa Sayıları: ss.272-277
  • Anahtar Kelimeler: Globular microstructure, Cooling slope casting, Semi-solid processing, EVOLUTION
  • Dokuz Eylül Üniversitesi Adresli: Evet

Özet

Thixoforming and related semi-solid processing (SSP) methods require thixotropic materials. One of the many SSP techniques is the cooling slope (CS) casting process, which is simple and has minimal equipment requirements, and which is able to produce feedstock materials for semisolid processing. When the feedstock is reheated to the semisolid temperature range, non-dendritic, spheroidal solid particles in a liquid matrix suitable for thixoforming are obtained. In this study, equipment for the CS technique was first established, and then the effects of the pouring temperature and inclined slope angle on the microstructures of A380 aluminum alloy (ISOAlSi8Cu3Fe) were studied. Optimum parameters for thixoforming experiments were selected, and it was found that the microstructure produced by the inclined plate depended on its angle and the pouring temperature.