Effect of Ca(OH)(2) Addition on the Engineering Properties of Sodium Sulfate Activated Slag

Creative Commons License

Dai X., Aydin S., Yardimci M. Y., Lesage K., Schutter G. D.

MATERIALS, cilt.14, sa.15, 2021 (SCI-Expanded) identifier identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 14 Sayı: 15
  • Basım Tarihi: 2021
  • Doi Numarası: 10.3390/ma14154266
  • Dergi Adı: MATERIALS
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus, Academic Search Premier, Aerospace Database, CAB Abstracts, Communication Abstracts, Compendex, INSPEC, Metadex, Veterinary Science Database, Directory of Open Access Journals, Civil Engineering Abstracts
  • Anahtar Kelimeler: ground granulated blast furnace slag, sodium sulfate, calcium hydroxide, alkali-activated cements, BLAST-FURNACE SLAG, STRENGTH DEVELOPMENT, CEMENT, HYDRATION, POROSIMETRY, STABILITY, EVOLUTION, POZZOLAN
  • Dokuz Eylül Üniversitesi Adresli: Evet

Özet

Alkali-activated slag is considered as a sustainable construction material due to its environmentally friendly nature. To further promote the sustainable nature of alkali-activated slag, a sodium sulfate activator is suggested to be used since it can be obtained naturally and generates lower greenhouse gas emissions. However, the mixtures activated by sodium sulfate exhibit low early strength and very long setting times. This study investigates the effects of calcium hydroxide (Ca(OH)(2)) addition on some engineering properties such as rheology, setting time, mechanical properties, porosity, and microstructure of sodium sulfate activated ground granulated blast furnace slag (GGBFS). Furthermore, the changes of chemical groups in reaction products and phase identification have been evaluated by Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction. Test results showed that Ca(OH)(2) addition can substantially increase the reaction rate and the compressive strength at early ages. In addition, the very long setting times of the sodium sulfate-activated mixtures were shortened by the addition of Ca(OH)(2). SEM analysis confirmed that the incorporation of excessive amounts of Ca(OH)(2) could lead to a less well-packed microstructure although the reaction degree of GGBFS remained the same at later ages as compared to the sodium sulfate mixture. It was also revealed that in case of the Ca(OH)(2) addition into sodium sulfate activator, the main reaction products are chain-structured C-A-S-H gels and ettringite.