Depth estimates for Slingram electromagnetic anomalies from dipping sheet-like bodies by the normalized full gradient method


DONDURUR D.

PURE AND APPLIED GEOPHYSICS, cilt.162, sa.11, ss.2179-2195, 2005 (SCI-Expanded) identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 162 Sayı: 11
  • Basım Tarihi: 2005
  • Doi Numarası: 10.1007/s00024-005-2711-x
  • Dergi Adı: PURE AND APPLIED GEOPHYSICS
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus
  • Sayfa Sayıları: ss.2179-2195
  • Anahtar Kelimeler: Slingram anomalies, Normalized Full Gradient method, downward continuation, depth estimates, PROSPECTING SYSTEM, POTENTIAL FIELDS, CONTINUATION
  • Dokuz Eylül Üniversitesi Adresli: Evet

Özet

The Normalized Full Gradient (NFG) method was proposed in the mid-1960s and was generally used for the downward continuation of the potential field data. The method eliminates the side oscillations which appeared on the continuation curves when passing through anomalous body depth. In this study, the NFG method was applied to Slingram electromagnetic anomalies to obtain the depth of the anomalous body. Some experiments were performed on the theoretical Slingram model anomalies in a free space environment using a perfectly conductive thin tabular conductor with an infinite depth extent. The theoretical Slingram responses were obtained for different depths, dip angles and coil separations, and it was observed from NFG fields of the theoretical anomalies that the NFG sections yield the depth information of top of the conductor at low harmonic numbers. The NFG sections consisted of two main local maxima located at both sides of the central negative Slingram anomalies. It is concluded that these two maxima also locate the maximum anomaly gradient points, which indicates the depth of the anomaly target directly. For both theoretical and field data, the depth of the maximum value on the NFG sections corresponds to the depth of the upper edge of the anomalous conductor. The NFG method was applied to the in-phase component and correct depth estimates were obtained even for the horizontal tabular conductor. Depth values could be estimated with a relatively small error percentage when the conductive model was near-vertical and/or the conductor depth was larger.