The Effect of Electroless Ni Coating of SiC Particles on the Corrosion Behavior of A356 Based Squeeze Cast Composite


Creative Commons License

DİKİCİ B., Tekmen C., GAVGALI M., CÖCEN Ü.

STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING, cilt.57, sa.1, ss.11-20, 2011 (SCI-Expanded) identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 57 Sayı: 1
  • Basım Tarihi: 2011
  • Doi Numarası: 10.5545/sv-jme.2010.111
  • Dergi Adı: STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus
  • Sayfa Sayıları: ss.11-20
  • Anahtar Kelimeler: electroless nickel, metal matrix composite, corrosion, EIS, METAL-MATRIX, PITTING BEHAVIOR, ALUMINUM, REINFORCEMENT, WETTABILITY, MICROSTRUCTURE, INTERFACE, ALLOY
  • Dokuz Eylül Üniversitesi Adresli: Evet

Özet

The corrosion behavior of electroless Ni coated SiC particle reinforced squeeze cast aluminum based composite was investigated by potentiodynamic scanning (PDS) and electrochemical impedance spectroscopy (EIS) techniques in aerated and deaerated chloride solutions. Microstructural and interfacial characterization of the composite was carried out by using an optical microscope, scanning electron microscope (SEM), energy dispersion spectroscopy (EDS) and X-ray diffractometer (XRD). It has been observed that electroless Ni coating of SiC particles is not an effective method to improve its corrosion resistance in structural applications containing halide solution. (C)2011 Journal of Mechanical Engineering. All rights reserved.