Impact characterization of glass/epoxy composite plates: An experimental and numerical study

KARAKUZU R., Erbil E., AKTAŞ M.

COMPOSITES PART B-ENGINEERING, cilt.41, sa.5, ss.388-395, 2010 (SCI-Expanded) identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 41 Sayı: 5
  • Basım Tarihi: 2010
  • Doi Numarası: 10.1016/j.compositesb.2010.02.003
  • Dergi Adı: COMPOSITES PART B-ENGINEERING
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus
  • Sayfa Sayıları: ss.388-395
  • Anahtar Kelimeler: Polymer-matrix composites (PMCs), Impact behavior, Delamination, Numerical analysis, Mechanical testing, LOW-VELOCITY IMPACT, DAMAGE
  • Dokuz Eylül Üniversitesi Adresli: Evet

Özet

This study presents the effects of impact energy, impactor mass and impact velocity on the maximum contact force, maximum deflection, contact time, absorbed energy, and overall damage area of glass/epoxy laminated composites, experimentally and numerically. The stacking sequence of the composite plates was chosen as [0 degrees/30 degrees/60 degrees/90 degrees](S). The impact event was simulated and analyzed by using 3DIMPACT finite element code. The overall delamination area obtained from experimental study and numerical analyses were also examined. It is seen that the numerical results are in good agreement with experimental results.results. (C) 2010 Elsevier Ltd. All rights reserved.